my "Woah Nelly!" Turbo.... - Page 19

5th October 2006, 07:46

Ph2t,
Where you ever able to get IRF6609's to work? The DirectFet packaging looks like a tough solder. The stats are mighty sweet though, RDSon is 2mohms. BTW has anyone seen IRF7456's in stock?

ph2t · 5th October 2006, 11:05

I had the 6609's in arly version of my v1.2 model. I had to solder wires to the underside pads. It was bloody awfull! Hence I stayed away from them in the long run.

There's a few out there. They (6609's) worked like a charm. Handled the high current really well to. The rate of change in hear dissipation on them was 2nd to none. A quick pump on the throttle from fwd -> rev -> fwd again woulf give 'em a little burst of heat and you could feel it! that's how well that type of packaging (DirectFET??) worked....

You can buy IRF7456's from ww.irf.com directly. Perhaps try www.rsaustralia.com as well.....

ph2t.

23rd October 2006, 00:25

ph2t,

great work man!.. i admire your work! recently i just burned the FETs on my mini-z rockcrawler.. (http://community.webshots.com/user/killer_d76) unfortunately.. living here in the Philippines have a very limited access on microchips like IRF7389 and others.. but hey great job men!

ph2t · 23rd October 2006, 00:35

Hey Killer, thanks for the comments! I just looked at your webpage, wow! You can do some great TTTT work! If you need mosfets just grab them from the shop http://shop.ausmicro.net . Aaron (runs the shop and this forum) is a really great guy and will ship no problems to the Philippines.

Welcome!

cheers,

ph2t.

23rd October 2006, 02:04

ph2t,

thanks man!.. i just browsed the shop briefly and i found this IRF7317 interesting! (it's the number 1 selling fet in the shop right?!), because all i needed is just the FET, cause my "rockbiter have a very limited space.

after reading the whole 19 very informative pages of this thread.. correct me if i'm wrong (cause i have a very limited knowledge when it comes to electronics)..

you are just using a single channel mosfet?!.

...

klims · 12th January 2007, 09:53

i don't suppose anyone will be able to post the part numbers of the nelly mosfets?
doesn't matter what model, i'm just having trouble finding low resistance p-chan's in an SO-8 package. best i can find are the Si4453DY at 6.5 mOhm.

jollyboss · 25th September 2007, 06:58

hello...again...
just a shot:can the spider 2.1 handle a lipo 3S setup?
thanks!

5th October 2006, 07:46	#361
thumper Posts: n/a	IRF6609's Ph2t, Where you ever able to get IRF6609's to work? The DirectFet packaging looks like a tough solder. The stats are mighty sweet though, RDSon is 2mohms. BTW has anyone seen IRF7456's in stock?

5th October 2006, 11:05	#362
ph2t Apprentice Post-Pimp Join Date: Jan 2003 Location: , Posts: 2,071	I had the 6609's in arly version of my v1.2 model. I had to solder wires to the underside pads. It was bloody awfull! Hence I stayed away from them in the long run. There's a few out there. They (6609's) worked like a charm. Handled the high current really well to. The rate of change in hear dissipation on them was 2nd to none. A quick pump on the throttle from fwd -> rev -> fwd again woulf give 'em a little burst of heat and you could feel it! that's how well that type of packaging (DirectFET??) worked.... You can buy IRF7456's from ww.irf.com directly. Perhaps try www.rsaustralia.com as well..... ph2t. __________________

23rd October 2006, 00:35	#364
ph2t Apprentice Post-Pimp Join Date: Jan 2003 Location: , Posts: 2,071	Hey Killer, thanks for the comments! I just looked at your webpage, wow! You can do some great TTTT work! If you need mosfets just grab them from the shop http://shop.ausmicro.net . Aaron (runs the shop and this forum) is a really great guy and will ship no problems to the Philippines. Welcome! cheers, ph2t. __________________

23rd October 2006, 02:04	#365
killer Posts: n/a	ph2t, thanks man!.. i just browsed the shop briefly and i found this IRF7317 interesting! (it's the number 1 selling fet in the shop right?!), because all i needed is just the FET, cause my "rockbiter have a very limited space. after reading the whole 19 very informative pages of this thread.. correct me if i'm wrong (cause i have a very limited knowledge when it comes to electronics).. you are just using a single channel mosfet?!....

25th September 2007, 06:58	#367
jollyboss New Enthusiast Join Date: Mar 2006 Location: Milano-Italy Posts: 73	hello...again... just a shot:can the spider 2.1 handle a lipo 3S setup? thanks! __________________ There's some cool tuning in everyone...

23rd October 2006, 00:25	#363
killer Posts: n/a	ph2t, great work man!.. i admire your work! recently i just burned the FETs on my mini-z rockcrawler.. (http://community.webshots.com/user/killer_d76) unfortunately.. living here in the Philippines have a very limited access on microchips like IRF7389 and others.. but hey great job men!

12th January 2007, 09:53	#366
klims Mini Poster Join Date: Apr 2006 Location: Melbourne Posts: 342	i don't suppose anyone will be able to post the part numbers of the nelly mosfets? doesn't matter what model, i'm just having trouble finding low resistance p-chan's in an SO-8 package. best i can find are the Si4453DY at 6.5 mOhm.