ak73 pro a

[ak73 pro a]

Update:

I have use silicon wires now:), for servo pot I have use old earbud wire:).

Edited by – ak73 pro a on 20 June 2005 23:05:29

[ak73 pro a]

Thanks I search on Google and I found this:

http://www.minizz.com/postp45346.html

Translate; Spain to English.

http://babelfish.altavista.com/babelfish/tr

Edited by – ak73 pro a on 16 June 2005 01:00:38

[ak73 pro a]

Edited by – ak73 pro a on 08 June 2005 05:05:24

[ak73 pro a]

Don”t if there any difference in performance, but always better then Iwaver wires:).

My 4562 fets mod, I have used some silicone compound for better heat transfer:).

Edited by – ak73 pro a on 07 June 2005 06:36:58

[ak73 pro a]

Can this fet handle x speed pro motor with 2×4 (total 8)? Thanks for help.

[ak73 pro a]

Not even when I stack 2×8 (total 8 fets)?

[ak73 pro a]

Is this fet any good: Infineon BSO215C, beacuse this one is only available at a shop.

Edited by – ak73 pro a on 01 June 2005 22:38:13

[ak73 pro a]

Before I will order the IW02, I have a lot of quesions:

1. What is servo saver?, do I need this?

2. Do I need rear shock set?

3. I would like to buy some bearings, does it fit on stock IW wheels? Or do I have to buy new wheels for the bearings?

Thanks for help.

[ak73 pro a]

Thanks a lot this really helping me out.

Edited by – ak73 pro a on 29 May 2005 20:54:16

[ak73 pro a]

Thanks a lot for help, but what do mean stacking fets? Stacking= two or more fets on top of the othe fet? and connecting them parallel? I mean pin 1-1, 2-2, 3-3 etc?

[Author]

Posts