modifiers wheel modding

This topic has 7 replies, 4 voices, and was last updated 21 years, 3 months ago by brendan.

Viewing 7 reply threads

Author

Posts
- June 7, 2004 at 9:43 pm #10621
  HACHI-RYOKU
  Participant
  Posts: 286
  These wheels are from modifiers cars. They are pretty easy to mod but need better tires. The wheels are nice because you can change the rims in a snap.
  
  These aren’t my pics. This is someone elses car. But I use them too and thought I would point them out because they are cool, and somewhat easy to mod with. Again though, the tires are very hard and slide a little too much. It’s best to get some tires from somewhere else and put them on the rims you want to use.
- June 7, 2004 at 9:49 pm #32607
  merc-blue
  Participant
  Posts: 1547
  what are the wheels from …. were can i get some?
- June 7, 2004 at 10:18 pm #32608
  brendan
  Participant
  Posts: 377
  they sell modifiers cars at k mart, big w or toys r us basically anywere they sells toys
- June 8, 2004 at 2:59 am #32603
  HACHI-RYOKU
  Participant
  Posts: 286
  Check them out here.
  http://www.modifierscars.com/home.htm
- June 14, 2004 at 9:06 pm #32514
  lots_of_lobsters
  Participant
  Posts: 101
  hey can you use the 1/43 and the 1/64 scale model wheels or just the 1/64…they sound good but.
- June 14, 2004 at 9:14 pm #32513
  merc-blue
  Participant
  Posts: 1547
  the 1:43 will probly fit superslicks and epochs but not BCG
- June 15, 2004 at 12:45 am #32503
  lots_of_lobsters
  Participant
  Posts: 101
  hmmm i was in kmart 2day and i couldnt find them..i was in toyworld and myer and target yesterday but obody had the modifiers…i feel so bad, I WANT THOSE RIMS!
- June 19, 2004 at 7:26 pm #32327
  HACHI-RYOKU
  Participant
  Posts: 286
  Use the 1:43. The 1:64 are too small. Sounds crazy, but it’s true. Remember that the bcg have over-sized wheels. The ones shown in the pic are 1:43. You will probably need to file out some room in the front wheel wells to accomidate for range of motion of the front wheels.
Author

Posts