SBCG stopped

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Technical › SBCG stopped

Viewing 12 reply threads
  • Author
    Posts
    • June 2, 2004 at 11:52 am #10625
      lots_of_lobsters
      Participant
      • Posts: 101

      my bit just stopped last nite, i dont know what it is, but all thw wires are still connected and the heatsinks on rite and evrything, just the motor wont run…what could b the problem?

    • June 2, 2004 at 12:17 pm #32723
      betty.k
      Participant
      • Posts: 2487

      check to see that the motor is making contact with the terminals. you may have to wedge some paper behind the motor terminal that touches the end of the motor. or maybe the motor died, i’ve had the same prob to discover a dead motor the source of the problem. and no point saying “but it’s new” because i’ve had dud motors outta the box:8ball:

    • June 2, 2004 at 5:30 pm #32712
      merc-blue
      Participant
      • Posts: 1547

      HEY TRY CHARGING IT AHAHAHAHAHAHA JK.. if its a clone it probly blew a motor or a batt

    • June 2, 2004 at 7:35 pm #32713
      lots_of_lobsters
      Participant
      • Posts: 101

      nah its not the motor, ive changed it between my 3 motors and none of em work…the motors clipped in lkke it always was and it just stopped workin…

    • June 2, 2004 at 7:36 pm #32714
      merc-blue
      Participant
      • Posts: 1547

      umm have u revved it on teh charger casue if you have it may have blow the PCB if its a real dog of a clone

    • June 2, 2004 at 7:39 pm #32715
      lots_of_lobsters
      Participant
      • Posts: 101

      yeh i tried that…and its not a clone either…its a SBCG GT-R set

    • June 2, 2004 at 7:52 pm #32716
      merc-blue
      Participant
      • Posts: 1547

      oh ok… search old post see if any one else has had any probs with them

    • June 2, 2004 at 8:00 pm #32711
      lots_of_lobsters
      Participant
      • Posts: 101

      ok that was strange…i just put it on the charger with its rear wheels and the gear both off and the motor gave a 1/2 a second burst of speed then died again…and now its chargin but i cant turn with it at all either…:(

    • June 2, 2004 at 8:01 pm #32722
      lots_of_lobsters
      Participant
      • Posts: 101

      YAY i fixed it- turns out that the PCB had a loose wire…but thanks anyway merc_blue

    • June 2, 2004 at 8:31 pm #32719
      merc-blue
      Participant
      • Posts: 1547

      no prob … i thought u said the wires were all good but oh well…yeh imwould sugest putting in header pins casue they stop broken wires and they add tons of class to ur micro RCs

    • June 2, 2004 at 8:44 pm #32720
      dgs73
      Participant
      • Posts: 2179

      lol; you mentioned the SBCG GTR set, curious, is it the yellow GTR, or has someone foun the SBCG history set already? (Its the same as the Ferrari/ Lambo triple pack; three shells (in this case black), black controller, chassis (not sure of gearing or wheel colour.)) If it is this new black set, where and how much?!

    • June 2, 2004 at 11:05 pm #32717
      betty.k
      Participant
      • Posts: 2487

      toyeast had em for a while. and they probably still do:8ball:

    • June 3, 2004 at 1:29 am #32710
      lots_of_lobsters
      Participant
      • Posts: 101

      i got mine from japan when i was ova there for about $40AUD…there all black bodies and 9.86:1 and yeh its the same sorta thing as the ferrari/lambo sets

  • Author
    Posts
Viewing 12 reply threads
  • You must be logged in to reply to this topic.