Which motor?????

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Technical › Which motor?????

Viewing 6 reply threads
  • Author
    Posts
    • March 29, 2003 at 8:50 pm #10124
      TallduDe
      Participant
      • Posts: 1430

      hey everybody.

      i was going to buy some motors then i found some motors which are 3.5 and 3.2. Are they any better then 3.8’s or 3.o’s. do they offfer more torque or speed???????? do they fit in bit char g’s????
      i want to put them on my fairlady 2 speed bit will that be a problem?
      any help will be great.:)

      Smoke em up!

    • March 31, 2003 at 3:05 am #34968
      micro_Amps
      Participant
      • Posts: 1290

      They will probably fit and they will probably go very well. I have used all kinds of motors in my 350Z booster with no problems. Go for it.

    • April 4, 2003 at 5:16 pm #34799
      ph2t
      Participant
      • Posts: 2088

      Some clone motors (namely blue ones from Bensu clones) I’ve found to be about 2mm longer than bit motors. Even pushing the gearing back a bit doesn’t help since the end of the motor pushes up against the gears.

      ph2t.

    • April 4, 2003 at 8:40 pm #34781
      TallduDe
      Participant
      • Posts: 1430

      yeah i have a nanoracer and the motor’s dont fit in my bit. just a bit too long.

      Smoke em up!

    • April 7, 2003 at 10:17 pm #34652
      Barrelll
      Participant
      • Posts: 675

      man go straight to a nice 3.5 or 3.8 motor, u can get them over at http://www.bitchargoz.tk 🙂

      27MHZ 3.5 Honda Accord (Custom Exhaust and F1 Wing)
      35MHZ 1.0 Battery Modded Castrol Supra
      45MHZ 2.2 Custom Painted Yellow and Black WRX
      57MHZ 2.6 Booster Trueno
      Mini Z Blue WRX (Lights, Gold alloys, Exhaust)
      Mini Z Castrol Supra + all mods (Coming)

    • July 14, 2003 at 1:24 am #23034
      Prowler3
      Participant
      • Posts: 121

      that place is a rip off!

    • July 15, 2003 at 7:29 pm #23127
      z-beam
      Participant
      • Posts: 2265

      barrelll’s got some good sh!t, and has been there for us for a very long time.

  • Author
    Posts
Viewing 6 reply threads
  • You must be logged in to reply to this topic.