AAH!!! MY NSX!! HELP!!!!!!

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Discussion › AAH!!! MY NSX!! HELP!!!!!!

Viewing 5 reply threads
  • Author
    Posts
    • August 23, 2003 at 12:39 am #11318
      Prowler3
      Participant
      • Posts: 121

      My farly new NSX shell is cracked! it must have happened while putting the shell on. Tjere is a large crack from the front headlight down to the bottom of the shell. Is there sum way to invisibly repair it? i used model pllstic glue put its not that flexible!!!!!!!!

      -HELP

    • August 23, 2003 at 11:04 am #38701
      KingRX7
      Participant
      • Posts: 129

      someone call the national gaurd!!!!!!!

    • August 23, 2003 at 4:07 pm #38704
      GT-ahh
      Participant
      • Posts: 774

      be careful because some glues will disolve the paint…
      how new is it? maybe take it back and say it came like that 😀

    • August 23, 2003 at 6:55 pm #38678
      RacerX
      Participant
      • Posts: 117

      model plastic glue melt the plastic to form a better bond so if you use that on the inside that should fix it (Just use a small amount) and modeling putty on the outside to cover the crack but that would mean repainting

    • August 23, 2003 at 6:55 pm #38679
      RacerX
      Participant
      • Posts: 117

      model plastic glue melt the plastic to form a better bond but it will eat paint I recon. so if you use that on the inside that should fix it (Just use a small amount) and modeling putty on the outside to cover the crack but that would mean repainting.

    • August 23, 2003 at 9:20 pm #38681
      Prowler3
      Participant
      • Posts: 121

      thanks, i probably will reglue it, and then paint the outside to get rid of the line caused by the crack!

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.