Combined Rx/ESC into uRS4

Home Forums 1/8, 1/10, 1/12, 1/18 – Discussion Combined Rx/ESC into uRS4

Viewing 2 reply threads
  • Author
    Posts
    • #9956
      Avatar photoAaron
      Keymaster
      • Posts: 2146

      I’d previously fitted out my uRS4 with an old 29MHz Rx and seperate 1/10th ESC I had ‘spare’. Ofcourse this adds a lot of weight and bulk high on the chassis.

      As the new body (Dodge Ram Pickup) is fairly low to the chassis I figured I’d better fix somethign up.

      So I went and grabbed me a combined unit to suit 1/10ths. It’s not much bigger than a stock Rx and has a reasonably beefy (18turn 540 class) motor limit. More than enough for a 1/18th.

      Attached is a pic.

      • This topic was modified 7 years, 8 months ago by Avatar photoAaron.

      --
      Site Owner Guy.

    • #19874
      betty.k
      Participant
      • Posts: 2487

      cool! it’s a giant mini z pcb!big.gif8ball.gif

    • #19875
      Avatar photoAaron
      Keymaster
      • Posts: 2146

      Pretty much. I suppose I should get off my backside and work out how to drive a “regular” servo with a Mini-Z PCB then all would be peachy! Extra light weight!
      Actually hasn’t someoen somewhere already got that mod documented?
      A.

      --
      Site Owner Guy.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.