control problem

Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Technical › control problem

Viewing 6 reply threads
  • Author
    Posts
    • March 23, 2006 at 1:31 pm #9771
      Admin
      Participant
      • Posts: 5952

      Hi all,

      I am new to this forum and I am new to mini-z too. I got my mini-z MR-02 long time ago. However, I had a crash long time ago. after the crash. My car seems have a bit of problem. I can’t control the car probably. i just wouldn’t go/stop/trun as before. is seems like a interference.

      Can someone please tell me what the problem is.

      Thanks in advance!

    • March 23, 2006 at 6:11 pm #31101
      HACHI-RYOKU
      Participant
      • Posts: 286

      Check the capacitors that are soldered to the motor. They may have come loose. If so, then just resolder them.

    • March 23, 2006 at 8:44 pm #31093
      BludyYank
      Participant
      • Posts: 25

      You might also want to check that all connections/wires for the antenna are intact and that the crystal is also seated proper.

    • March 24, 2006 at 12:22 am #31094
      Admin
      Participant
      • Posts: 5952

      Doh!. I have i have broken one of the wire. and I need to get the soldering kit to fix it. by the way my antenna is broken abit. please have a look a the photo. does that matter?

    • March 24, 2006 at 4:45 am #31090
      betty.k
      Participant
      • Posts: 2487

      it should be ok but i’d replace it to be sure.
      just go down to your local music shop and buy an unwound guitar string that’s a similar diameter:thumbs_up: :8ball:

    • March 24, 2006 at 4:55 am #31084
      ken_wyleung
      Participant
      • Posts: 236

      You can try train model hobby shop and make by yourself.

    • March 25, 2006 at 12:17 am #31077
      Admin
      Participant
      • Posts: 5952

      thanks guys. i will let you know how it goes.

  • Author
    Posts
Viewing 6 reply threads
  • You must be logged in to reply to this topic.