HELP!!!!!!!!!!!!!

Viewing 5 reply threads
  • Author
    Posts
    • #11002
      Admin
      Participant
      • Posts: 5952

      I recently Bought some knew cars and a new 4.5 Motor(yes they are very beautiful) I installed all of this into my Charg-G but when i try to run it, it wont do anything, there seems to be nothing wrong with it, all the connections in the car are A-OK, is it the controller that has a problem? or is it the car?

    • #21918
      Prowler3
      Participant
      • Posts: 121

      if you have more than one car, try the motor in each car, just a thought. Are the batteries in the charger dead???

    • #21920
      barto_85
      Participant
      • Posts: 1321

      Sorry, what did you install in your char g?? It could have the wrong gearing on the motor, if it is white, they are bit racer gears and wont run with char g gearing. if this is the case, just take the black gear off a different motor and swap them, then it will work.

    • #21926
      jazza_1984
      Participant
      • Posts: 94

      you will have to try your motor, etc out on other cars to be able to work out what is wrong… if you have other cars….

    • #21927
      DaveF
      Participant
      • Posts: 1038

      Do you hear the motor spinning at all?
      Do the front wheels move when you press left/right on the controller?
      Can you test a different motor in this car?

      more details please.

    • #21964
      jamiekulhanek
      Participant
      • Posts: 2563

      Is the motor length slightly shorter?? Perhaps there is no current getting to the motor.
      To fix this bend the metal contact (that connects to the motor endbell) to the left a bit.

      Also the small contact on the motor should face the 3 O’clock position, i.e. the little tab closest to the rear of the car.

Viewing 5 reply threads
  • You must be logged in to reply to this topic.