i gots me a skyline…………..
Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Discussion › i gots me a skyline…………..
- This topic has 17 replies, 10 voices, and was last updated 19 years, 10 months ago by ph2t.
-
AuthorPosts
-
-
July 18, 2004 at 4:38 pm #12265
and i made it look real purty!:D
previously it was a red r34 i waver body and has about 1mm clearance at the front so i decided to make this a track only body. i ve learnt that bright colours are the best for these buggers on a track and there aint much brighter than flouro yellow!:smiley16:
when i undercoated, some of the exposed red paint bled through, i figured once i started getting the colour down it would disappear. and it might have too, but when i went paint shopping i could only find flouro yellow in a polycarbonate paint. that s specifically for those clear 1:10 bodies as it eats into the plastic. so i knew i was gonna have interesting results!:p
after all the colour the red bled through alot, but i actually like it and regret not sanding back more spots for the red to come through! i scored some troy lee designs stickers from the local bike shop and cut to fit. after some nice shiny krylon clear glaze i added the mesh for the vents up front. it s added 10kph already!:p:8ball:
-
July 18, 2004 at 4:44 pm #53672
looks nice pitty i wont see it casue i will be to far infront of you
-
July 18, 2004 at 6:48 pm #53687
she’s a bloody beaut!
I love it!
ph2t.
-
July 18, 2004 at 7:05 pm #53688
I call it mellow yellow, nice job :smiley2::smiley2::D
-
July 19, 2004 at 1:32 pm #53715
very, uh, yellow… coolies:smiley2::approve:
-
July 19, 2004 at 8:00 pm #53733
It burns my eyes
-
July 19, 2004 at 8:21 pm #53735
how low can you go betty:p
nice paint job and the stickers are great!
ever race it yet? do u have issues with ground clearance?
-
July 19, 2004 at 11:01 pm #53745
i tested it out before painting, on a flat track it’s fine. maybe the odd scrape. but anywhere else and it catches the ground big time. so it’s a “track only” body. i have another one and the front lasted about 2 minutes before it got trashed. i cut off the rest of the skirt and use that bod out back. ph2t has one with a pretty jagged skirt too! i did no lowering to it, that’s how it came. all i did was remove the rear spoiler and door pillars:8ball:
-
July 19, 2004 at 11:03 pm #53746
the track will make its own sanding adjustments!
nice colour, love it. those stickers are awesome to, were they expensive?
-
July 19, 2004 at 11:18 pm #53747
dude thats low!, and wat z -beam said
“the track will make its own sanding adjustments!”
just dun drive that thing at nite or a plane mite mistake it for a landing marker. -
July 19, 2004 at 11:41 pm #53749
decals were about $8 for both left and right. that name again, troy lee designs. been stickering mountain and trailbikers for years:8ball:
-
July 19, 2004 at 11:55 pm #53750
what about the skull betty?
-
July 19, 2004 at 11:59 pm #53751
TROY LEE DESIGNS!!!:8ball:
-
July 20, 2004 at 12:02 am #53752
gee i wonder were u got them decals form betty???? they look kinda like troy lee stuff
-
July 20, 2004 at 12:13 am #53754
-
July 20, 2004 at 12:29 am #53756
Looks good!
Just don’t let that baby wander off the track…
-
July 20, 2004 at 12:37 am #53757
hmmmm, that’s what ph2t’s looks like too! :8ball:
-
July 20, 2004 at 3:01 am #53760
yup, same colour as well……
-
-
AuthorPosts
- You must be logged in to reply to this topic.