jyosho integrated board

Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Technical › jyosho integrated board

Viewing 4 reply threads
  • Author
    Posts
    • June 3, 2007 at 6:34 pm #12798
      jollyboss
      Participant
      • Posts: 71

      has anyone tried this?
      It costs a lot but can handle lot of amps,and most of all has a standard servo plug:

      http://www.rcmart.com/catalog/product_info3.php?cPath=36_47&products_id=6949

    • June 4, 2007 at 1:28 am #60753
      PandaBear
      Participant
      • Posts: 1866

      that Futaba thing has been around forever I think,
      looks like the ones used in Tamiya Tamtechs in the 80s
      and then they were popular in the Kyosho leaning-rider bikes.

      They can run off 6cell (or 2s LiPo?! just DIY cutout) and yeah
      I’d say the S135 microservo is standard fare.

      Its not that small though… nearly size of 2 matchboxes.
      These days you can get 1/10 ESCs & RXes with heaps bigger ratings
      that take up total realestate less than that imho.

    • September 8, 2007 at 6:46 pm #61003
      jollyboss
      Participant
      • Posts: 71

      I forgot to mention it…
      I’d use for an Iwaver 02,Im bored to de- and re-solder those 4 wires-servos…
      The smalles parts for mini rc are the mini-x ESC and RX,but they’re alittle tricky to fit under the Saleen body…

    • September 9, 2007 at 4:33 pm #61010
      Dangerous Dave
      Participant
      • Posts: 229

      does your Mini X Rx have acceptable range? Both of the ones I dealt with were unusable….

    • September 9, 2007 at 9:04 pm #61013
      jollyboss
      Participant
      • Posts: 71

      I haven’t tried them yet…I hope is enough for a 1:28 sclae distance…

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.