LXX Scale Racer – reverse dead
Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Technical › LXX Scale Racer – reverse dead
- This topic has 13 replies, 6 voices, and was last updated 20 years, 2 months ago by micro_Amps.
-
AuthorPosts
-
-
March 12, 2004 at 8:53 pm #12050
Reverse died suddenly, I saw smoke – not sure where it came from. It looked impressive for a few seconds until I realized what had happened.
Forward, left and right still work fine.
Is there anything I can do?Or is it a sign from above to get a Mini-Z.
-
March 12, 2004 at 9:25 pm #50023
sounds like half of the fets are fried….Can you take a pic of the PCB?
-
March 12, 2004 at 11:28 pm #50026
The motor still goes backwards when I switch the wires, so it must be the PCB somewhere.
I’ll take some pics later when I get home.
-
March 13, 2004 at 1:48 am #50029
Here’s a pic. Sorry about the quality.
-
March 13, 2004 at 3:15 am #50030
My guess would be that the secret ingredient of the Reverse FET has escaped.
Pefect time to FET mod… even a little 2×2 stack pair would be nice 😉
A.
--
Site Owner Guy. -
March 13, 2004 at 3:35 am #50031
Kero, a few things man….
First I want to confirm that the two solder pads on the left with the holes in the PCB are the two pads you screw the motor terminals into???
If there are…..
The left side has two small packaged chips, each with 8 pins, 4 on each side. Looking at the top one of the two you will notice strange marks? Perhaps it’s dead…..
I say remove BOTH fets and fet mod it with some IRF7389’s…
Cheers,
ph2t.
-
March 13, 2004 at 3:48 am #50033
Yep the two holes are for the motor terminals. Things could get ugly if I try replacing the fets. I don’t really know what I’m doing.
-
March 13, 2004 at 5:26 am #50034
Hey Kero, guess what…
:)uA -
March 13, 2004 at 6:27 am #50035
Scale racers are good for FETting. The boards are very similar if not identical to a Mini-z board, but UPSIDE DOWN. In a Kyosho Mini-z the fets are on the underside of the board, in the LXX, they are on top. Stack ’em high!
-
March 13, 2004 at 1:31 pm #50036
FET mod it is then!
You have mail micro 🙂
Edited by – Kerosene on 13 March 2004 08:54:30
-
March 13, 2004 at 2:08 pm #50037
Hmm, we have 4 Melbourne pukes with mini-z’s or mini-z clones……….. C’mon we’ve gotta have a meet soon!
ph2t.
-
March 13, 2004 at 2:29 pm #50039
Yeah count me in. I’d like to see a real deal mini-z in action.
-
March 13, 2004 at 10:20 pm #50040
jamie k is heading our way in april i think. should be enough time to get something together! i’m dying to see a blown z in action:p:8ball:
-
March 13, 2004 at 10:23 pm #50041
Once I get my hop ups organised I’ll be pushing for the same thing. I’ll bring an Xmod as well 😀
:)uA
-
-
AuthorPosts
- You must be logged in to reply to this topic.