New: PN S05 Motor!!

Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Discussion › New: PN S05 Motor!!

Viewing 5 reply threads
  • Author
    Posts
    • March 15, 2005 at 6:51 pm #12586
      Avatar photoAaron
      Keymaster
      • Posts: 2146

      PN Racing has just made available their new S05 Motor. It s a direct stock replacement that doesn t need FETs or external turbo but offers the following…
      —-
      No Fets upgrade or external turbo required

      Two big hole for cooling down the temperature

      High temperature wire

      Armature balanced

      Big comm head, more bunch

      Pre drill two hole for modified motor mount

      104 cap installed

      RPM 28000-29000 (4.8V Loading 2g)
      —-

      Yours for AUD19.95 from http://shop.ausmicro.net/product_info.php?products_id=77

      --
      Site Owner Guy.

    • March 15, 2005 at 7:38 pm #58939
      Avatar photoarch2b
      Participant
      • Posts: 69

      this has been listed on their site for a short while now and the topic of discussion on sevral forums for the pst week of two:smiley2:

      it does sound like it should be an awsome motor! i’m all for higher perfromance non-turbo motor’s.

      btw, NML is working on a non-turbo motor as well:smiley16:

      Edited by – arch2b on 15 March 2005 14:39:28

    • March 15, 2005 at 10:12 pm #58943
      Avatar photoz-beam
      Participant
      • Posts: 2265

      sounds like a great alternative to the hotter motors they nhave allready, and whats these new sealed bearings like?

    • March 16, 2005 at 4:16 am #58948
      Avatar photoAaron
      Keymaster
      • Posts: 2146

      I’ve been testing with sealed bearings for a short while (for the ausmicro.com bearing range to suit Monsters etc) and they’re definately more durable in adverse conditions.

      Great for cars that run everywhere – more resistant to fuzz and grit.

      The PN ones are a great price and top quality.

      A.

      --
      Site Owner Guy.

    • March 16, 2005 at 2:40 pm #58952
      Avatar photoz-beam
      Participant
      • Posts: 2265

      so are they available for mr01 and 02’s?

    • March 16, 2005 at 8:57 pm #58971
      Avatar photoAaron
      Keymaster
      • Posts: 2146

      The PN ones are for MR01/MR02…. ausmicro.com branded options will probably come in a few months.

      --
      Site Owner Guy.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.