Pix And Info on all My Z’s

This topic has 5 replies, 2 voices, and was last updated 18 years, 8 months ago by rcs2die4.

Viewing 5 reply threads

Author

Posts
- September 7, 2005 at 5:14 am #9863
  rcs2die4
  Participant
  Posts: 217
  As my gallary doesn”t work I thought I”d put up a post with Pix and Info on all My Z”s
  
  First off I have aKyosho MR01, It”s a Yellow360 Modena and the onlymod isa Kyosho top center shock…. I get 24k’s on my Tamiya Speed Checker with a 9t pinion and 800mAh Ni-MH
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Stock%20MR01/P1000539.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Stock%20MR01/P1000540.jpg
  
  Edited by – rcs2die4 on 07 September 2005 01:32:27
- September 7, 2005 at 5:29 am #18750
  rcs2die4
  Participant
  Posts: 217
  Next is My Kyosho MR01 That I built from hopups. It’s aBlue Nissan Skyline GTR R34and there is no point in listing the hopups as I would have to list every part of the car as I built it completely from hopups, It didn’t start as an RTR !!! One thing you cant see is a 5×2 Fet stack and the motor is a Kyosho Xspeed rotor (50turn)and magnets in a Yeah racing BB motor can with high carbon brushes running a 14t pinion.I get 50k’s onthe Speed Checker With fresh 800mAh Ni-MH batteries then 48k’s after about 10sec of full throttle it stays there till the batteries die off.. It’s a mad Z to run and it handles awesome !!!! I also have a Mini Z Workshop motor for this it’s a 35turn rotor, high carbon brushes, Yeah Racing bb Motor can andGold Neo Magnets… Haven’tspeed checked this yet but it’s crazzy fast !!!
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC1.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC2.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC3.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC4.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC5.jpg
  
  This is when it was first put together….
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/GTRCover.jpg
  
  And heres what it looks like as it’s going past !!!
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Hopup%20MR01/PIC6.jpg
  
  Edited by – rcs2die4 on 07 September 2005 02:51:54
- September 7, 2005 at 5:48 am #18747
  rcs2die4
  Participant
  Posts: 217
  Next is my Kyosho MR02, It”s a Red Enzo. The list of mods is a3x2 Fet Stack, PN speedy Modifies Motor, Ball Diff, Full Ball bearings, Blue screw set, Alloy MM motor pod, lowered front, Yellow front springs, a Kyosho Red number4toe rod,Carbon fiber rear H plate,Alloy Wheel nutsand a Gold antanna..I havn”t speed checked it yet !!! But will do…
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC1.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC2.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC3.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC4.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC5.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC6.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20MR02/PIC7.jpg
  
  Edited by – rcs2die4 on 07 September 2005 01:49:37
- September 7, 2005 at 6:07 am #18746
  rcs2die4
  Participant
  Posts: 217
  Next is my Pro-Z, It’s A D2 Silver Merc. The chassis is a Pro-Z Pocket Knife version 5 Team car in Blue carbon fiber. The carbon is a little thicker then the standard ver 5 and of cause it’s Blue !!. It’s got a PN Racing motor mount, Ball Diff, full Ball Bearings, PN speedy Modified Motor, Alloy wheel nuts,Rear side shocks, Rear Center shock (part of the Diamondplate),3deg castor, red springs in the front. I’m running an IWaver 02 PCBwith a LXX MR01servo case, Yeah Racing POT in the servoand Deans micro plug for the battery pack.The pack is a 750mAh Ni-MH Saddle pack… I’ve been thinking of running full aftermarket electronics but I think that takes it to far away from being a Mini-Z… I also have not speed checked this yet..
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC1.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC2.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC3.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC4.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC5.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC6.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC7.jpg
  
  Look at the low C O G on these Pro-Z’d, Godthere awesome !!!!!
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/My%20Pro-Z/PIC8.jpg
  
  Edited by – rcs2die4 on 07 September 2005 03:05:31
- September 7, 2005 at 6:27 am #18740
  rcs2die4
  Participant
  Posts: 217
  And Finally My FireLap 4.0 Monster !!!
  
  You can find all the info on this at the link below… For pix, Click where it says NEW PIX HEREthis will also show you the old pix as well, so you only need to click theNEW PIXlink…
  
  http://www.ausmicro.net/v3/link.asp?TOPIC_ID=3323
  
  Here’s a few pix of My Z’s Together…. You will see in the first pic here that there is also another Z (Black GT3) but this is now just a rolla as the PCB died(servo side) and it’s onlyanLXX so no point in fixing !!!
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/Better%20Forum%20Pics/P1000581.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/Better%20Forum%20Pics/P1000574.jpg
  
  http://i23.photobucket.com/albums/b362/RCS2DIE4/Better%20Forum%20Pics/P1000577.jpg
  
  Let me know what you guys think of myZ’s !!!!!!
- September 7, 2005 at 11:53 am #18744
  betty.k
  Participant
  Posts: 2487
  i think you need to have a go a a custom paintjob now, nice collection. just ‘seen it before’ if you know what i mean
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.

Pix And Info on all My Z’s

Share this: