question for micro-amps

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Discussion › question for micro-amps

Viewing 8 reply threads
  • Author
    Posts
    • January 23, 2004 at 8:19 pm #11251
      merc-blue
      Participant
      • Posts: 1547

      hey. i just wanna know wats a better pcb… a enertec. or one of ur monster mosfets.. (like the one i bought a while ago with stacked mosfets n stuff)… casue im building the ultimate monster 2 compeate with all these ones that are apearing.. and i also have just mad a chopped chassis that works greak with AFX slot car bodys… very classy. i got pics of my chassis in with its dual batts n crap.. every thing fits with tons of room its a dream . but i need more power…

    • January 23, 2004 at 8:48 pm #37770
      ph2t
      Participant
      • Posts: 2088

      this is the way with you isn’t it murc? Always building the ultimate “somthing”….

      I’d say the mosfet pcb is a lot better than any stock bit pcb, period.

      ph2t.

    • January 23, 2004 at 9:58 pm #37767
      merc-blue
      Participant
      • Posts: 1547

      yeh im not settling for second place… i need a new challange after this im thinking.. boat u guy recon i can get 1 of them boats goign decent speed.. they have 2 props. rite u recon i could make it IR digi q style steering.. that would b cool

    • January 23, 2004 at 10:27 pm #37768
      betty.k
      Participant
      • Posts: 2487

      while the enertec pcb has some good qualities; good range, fets in the drive circuit, there are too many drawbacks. pcb is 50%longer than a bcg, boost only when going straight forwards. i don’t use these pcb’s any more. i’d go a fetted pcb without a doubt, even a stock one over an enertec. great chassis’ though:8ball:

    • January 23, 2004 at 10:50 pm #37769
      micro_Amps
      Participant
      • Posts: 1290

      M.B. Ph2t and Betty.K are spot on. The enertec pcb is ok in stock form, but a fet modded 2 speed BCG leaves it for dead.
      And the range on a BCG can usually be modded to excede the enertec anyway with crip cap / tuning / aerial mods.
      :)uA

    • January 24, 2004 at 2:19 am #37766
      merc-blue
      Participant
      • Posts: 1547

      k thnx 4 that looks like im using that pcb 4 sumthing finaly.. lol it been sitting in old chassis doing nutting 4 ages.. lol

    • January 24, 2004 at 5:34 am #37763
      ph2t
      Participant
      • Posts: 2088

      a daul stacked fet PCB by microamps sitting around not doing anything? that’s bloody Sacrilege!

      ph2t.

    • January 24, 2004 at 3:12 pm #37738
      merc-blue
      Participant
      • Posts: 1547

      yeh i no

    • January 24, 2004 at 3:51 pm #37734
      betty.k
      Participant
      • Posts: 2487

      SINNER!!:evil::8ball:

  • Author
    Posts
Viewing 8 reply threads
  • You must be logged in to reply to this topic.