Reverse iwaver steering for use with KT5?

Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Technical › Reverse iwaver steering for use with KT5?

Viewing 3 reply threads
  • Author
    Posts
    • May 18, 2006 at 10:42 am #9729
      Kerosene
      Participant
      • Posts: 329

      Anyone know how I can reverse the steering on an old iwaver so I can use it with a KT5?
      Can I just swap the servo wires around?

    • May 18, 2006 at 11:18 am #29798
      betty.k
      Participant
      • Posts: 2487

      from memory, you’ll need to swap the servo pot wires and the servo motor wires:8ball:

    • May 18, 2006 at 2:38 pm #29787
      rcs2die4
      Participant
      • Posts: 217

      Hey Kerosene,

      I’ve attached a diagram I drew up a while back for this exact thing !!!

      The first two PCB’s are for the very first Iwaver PCB’s which have all four wires along the front of the board !!
      The next two are for the next revision of the PCB’s with the motor wires at the front and the POT wires at the side !!!!
      The only two wires you have to change are the POT wires at the POT end… The diagram will show you how to wire it !!!

      Hope it helps :smiley9:

    • May 18, 2006 at 10:52 pm #29726
      Kerosene
      Participant
      • Posts: 329

      :thumbs_up:

      Thanks.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.