some info on tamiya min 4WD motors

Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Technical › some info on tamiya min 4WD motors

Viewing 2 reply threads
  • Author
    Posts
    • September 13, 2003 at 9:20 pm #11837
      GT-ahh
      Participant
      • Posts: 774

      found this floatin on the net…
      There are many, many rumors about Tamiya motors for a Mini-Z. Yes, some will work but, others will cook your ESC. This happens if the current (mA) being drawn from the motor is above 1.5A or 1500 mA. The safe range is 1.0A ? 1.5A.
      Of course, if your are using FETs or a turbo, a higher amp draw is allowed.

      model power consumed RPM with load RPM without load torqueg-cm

      Stock FA130 1200mA 12000 13800 10
      Torque Tuned 1200mA 12000 13600 10
      Atomic Tuned 1300mA 15700 15600 10
      Rev Tuned 1500mA 14300 17600 10
      Hyper-Dash 1600mA 17200 19300 10
      Mach-Dash 1900mA 20800 23400 10
      Jet Dash 4000mA 23000 28000 22
      Ultra Dash 4000mA 24000 29000 20
      Plasma Dash 4000mA 25000 29000 20

    • September 14, 2003 at 1:43 am #47199
      t00l
      Participant
      • Posts: 109

      yeah, ive also seen one of these floating around with the speeds they put out too 🙂

      goto try and find it its quite intresting 😀

    • September 19, 2003 at 5:29 am #47262
      jamiekulhanek
      Participant
      • Posts: 2563

      BUT the mini z has 4 cells a mini 4wd only has 2 cells so those figures arent accurate for a mini z.

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.