some motors for u to chew on
Home › Forums › Mini-Z, Mini-X, X-Mods and other Mini-Scale › Mini-Z, Mini-X, X-Mods – Discussion › some motors for u to chew on
- This topic has 24 replies, 7 voices, and was last updated 19 years, 7 months ago by TallduDe.
-
AuthorPosts
-
-
September 5, 2004 at 2:37 pm #12322
http://www.toyeast.com/v2/prodlist.asp?catid=1566
im interested if u can jam some bbs into these if i can… 👿 mwahahahhahahaha. -
September 5, 2004 at 7:38 pm #55312
I am having serious trouble believeing those dyno results…..
-
September 5, 2004 at 8:01 pm #55313Quote:I am having serious trouble believeing those dyno results…..
Hmm… 60,000 rpm under no load sounds impressive and the design being patented and all..
Still, I’ll end up buying one anyway just to see how it’ll go…
-
September 5, 2004 at 8:28 pm #55314
60,000 rpm under no load isnt that impressive, a plasma dash on 6 cells revs to 90,000-100,000.
The part i am not willing to believe is the power output….over 35w….bullshit.
-
September 5, 2004 at 10:34 pm #55315
specs shmecs. i wanna see that motor being tested on the ground. then we’ll see wat it can really do. i simply want that can and shove bbs in it dammit!
Edited by – mocky on 05 September 2004 18:39:58
-
September 8, 2004 at 4:52 pm #55338
So has anyone got one of these non turbo motors yet ?
Wouldn’t mind hearing a review of it compared to the kyosho x-speed.
🙂
-
September 8, 2004 at 6:20 pm #55342
OF topic VVTi variable valve timing intellegence, What the fuck dose the L stand for in VVTLi Kev and why would nothing come close…:smiley2:
-
September 8, 2004 at 6:34 pm #55344
Logic?? Lotsa?? Lack of??
-
September 8, 2004 at 8:05 pm #55347
What about LAGG…
-
September 8, 2004 at 8:15 pm #55348
VVTi is just whats in your seca or levin or whatever you want to call it CORLLA…
(2l’s in that)
No L is involved so please explain the quote, Where the dose the L come from and why would nothing come close,Give me dohc any day of the week…
-
September 8, 2004 at 8:34 pm #55349
lift i suspect
was about to get one of these motors but……. i guess ill wait till next pay check for that.
-
September 9, 2004 at 1:08 pm #55354Quote:specs shmecs. i wanna see that motor being tested on the ground. then we’ll see wat it can really do. i simply want that can and shove bbs in it dammit!
Edited by – mocky on 05 September 2004 18:39:58
do a test, Mock… grab one, you may beat us all next time you race us. (then again, you may not.:smiley2:)
-
September 9, 2004 at 1:56 pm #55356
lol, smartarse………
-
September 9, 2004 at 3:30 pm #55357
Im guessing that motor is for FETs or a Turbo??
-
September 9, 2004 at 3:48 pm #55358Quote:Im guessing that motor is for FETs or a Turbo??
The way I read into it, is that they don’t mention fets or turbo required. Then further say it is for all i-wavers and z’s. They only compare it to the kyosho x-speed motor…
But who knows…
I’d like to order one perhaps next month or so, already depleted the rc budget for this month.
-
September 11, 2004 at 10:15 pm #55421
i wont be possibly smokin any1 for a while, need to get the z bak into workin order first. i will grab one wen i can, just gotta love that can and endell.
-
September 17, 2004 at 10:06 pm #55571
the results are in ppl. read and u shall be enlightened.
http://www.microrccenter.com/forum/index.php?showtopic=28820
very nice stuff. -
September 18, 2004 at 1:48 am #55573
yeah i read that, and it just pisses me off how people fall for the stupid no load RPM characteristics….
Looking at the power output (actual) and quoted power by I Waver, i couldnt help but want to strangle somebody.
Plasma dash rules!!
-
September 18, 2004 at 6:45 am #55577
that guy in that thread is getting some outragous speeds!
might have to get these motors to do a test myself.
wish i wasnt broke :dead:
-
September 19, 2004 at 8:25 am #55588
Im curious as to what the internal design is like…
-
October 11, 2004 at 11:15 pm #56052
okay i bought one of these motors and all i have to say is holy fuck me with a big piece of the cross!
the one i got was the IWAVER MINI-Z SUPER X-SPEED MOTOR (White Packing). this according to the review posted by mocky is the weaker or less powerful of the two. but all i have to say is fuk me i hope i didnt fry stock fets!
here is a pic and you will know why!
-
October 11, 2004 at 11:18 pm #56053
okay a few details….
the car is a stock (fet wise) kyosho mini z mr-01. its runing ball bearings, a kyosho ball diff and a 10t pinon.
the batts arent that great some elcheapo nimh’s.
also i havent even broken in the motor properly either!
here is another pic
-
October 11, 2004 at 11:23 pm #56054
okay after these short runs i put the motor away, it got a bit hot even after a few seconds of runing plus i didnt want to fuk up my fets.
this motor seems to scream!
btw this will be going into a turbo car this sunday and further news of speeds will be had.
just for the record this is the top speed…….47km/h.
im in shock still.
ps proof is to be had in the attachments
(btw aaron i had probs puttin up pics thus the number of posts, everytime i tried to add image on the tool bar it would say error on page)
-
October 12, 2004 at 2:43 am #56063
Man that’s not even the pro version. Have you got the pro version as well ?
Looking forward to seeing it run dude.:)
-
October 12, 2004 at 2:52 pm #56076
no sorry kev i didnt get the pro i heared that you have to have a turbo to run that sucker or it will blow stock fetts, i bouht this motor as a replacement for my motor now (always looking for more speed LOL)
but i think its a bit toooo hot for my stocker.
i cant use it on my set up atm waiting on a plug system so i can ezyly cahneg motors atm the motor is soldered straight to the turbo. i dont want the hassle of soldering just to find out a motor is shite.
so who wants to try the motor? kev? dave?
-
-
AuthorPosts
- You must be logged in to reply to this topic.