Steering Problem

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Technical › Steering Problem

Viewing 3 reply threads
  • Author
    Posts
    • October 27, 2002 at 12:53 am #9407
      Admin
      Participant
      • Posts: 5952

      I just got my Lxx Char-G and everything is great except that when I turn to the right it does not turn as sharp as when I turn to the left, and more importantly it gets stuck turning until I tap the remote to the left. What can I do to fix this?

    • October 27, 2002 at 3:13 am #16146
      Trueno
      Participant
      • Posts: 66

      Hi Acura,

      Not sure about the Lxx but with the Bit Char-G you need to pull apart the front end. There is a magnet in there which sounds like it’s off centre. You need to centre it and put a drop of glue on to hold it in place. On some of theBit Char-G sites they have step by step photos to help. Good Luck!

    • October 27, 2002 at 6:49 am #16165
      z-beam
      Participant
      • Posts: 2265

      if the actual tires are catching then u need to cut the inside of the body away using fine sand paper or a blade

    • October 27, 2002 at 12:16 pm #16183
      Admin
      Participant
      • Posts: 5952

      I fixed the sticking problem by tearing apart the front end, and now the only problem is that going one way it turns in about a 6 inch circle and the other way it takes a foot or more. There is no binding anywhere, could there be anything else?

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.