Steering Trouble fixed!!

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Technical › Steering Trouble fixed!!

Viewing 6 reply threads
  • Author
    Posts
    • August 10, 2002 at 2:09 pm #9239
      Admin
      Participant
      • Posts: 5952

      My steering was messed up since i bought it.. i took it apart several tiems to clean the magnet cuz it mite have been mis aligned or something.. But it seems like the car only turns left and doesnt wanna turn right sometimes… Upon closer inspection i saw that the steering wires were wraped around eachother and were touching causing very poor electrical conduction.. So i took a tooth pic and ran it down the wires to seperate them and it runs soo smooth now! Hope u guys appreciate the heads up!

    • August 12, 2002 at 1:21 pm #15221
      Admin
      Participant
      • Posts: 5952

      You talking about inside pcb board area?

    • August 13, 2002 at 2:37 am #15241
      Admin
      Participant
      • Posts: 5952

      yup!

    • August 13, 2002 at 10:49 pm #15266
      Admin
      Participant
      • Posts: 5952

      Yeah the Supra I just got had the exact same issue- looks like the newer Tomys are short on insulation on the steering wires.. some of my older cars are insulated on all 4 wires, but this was only on 2, and the 2 uninsulated ones were causing issues by touching anything in the way, and preventing a strong left turn.

    • August 16, 2002 at 3:40 am #15314
      Admin
      Participant
      • Posts: 5952

      where are these wires? I have a supra. . .

    • August 22, 2002 at 3:20 am #15437
      Admin
      Participant
      • Posts: 5952

      hmmm..i should try this. the steering isnt equal on mine either :smiley5:

    • August 22, 2002 at 10:00 am #15442
      Admin
      Participant
      • Posts: 5952

      Thnx i needed that

  • Author
    Posts
Viewing 6 reply threads
  • You must be logged in to reply to this topic.