wat motor do u use punk?
Home › Forums › 1/8, 1/10, 1/12, 1/18 – Discussion › wat motor do u use punk?
- This topic has 11 replies, 5 voices, and was last updated 19 years ago by PandaBear.
-
AuthorPosts
-
-
April 18, 2005 at 4:41 pm #12615
wat motors do u guys run in ur cars? the cons and pros of them would be nice too.
-
April 18, 2005 at 4:51 pm #59320
depends i have a few my personaly fav is my 7×1 D6 its a very nice motor very fast.. pity about orion brushesbut i really like the kyosho lemans stock 05 motor great fun and can havea bit of kick with right gearing
-
April 18, 2005 at 6:00 pm #59321
Tamiya johnson silver can 540 motor &
Epic roar stock pro. -
April 18, 2005 at 7:58 pm #59324
Pair of titan 550’s…
But then I do run an E-Maxx
A Mate is about to get a Stampede
So I will get to do some racing against him… will be interesting to see how they compare. -
April 21, 2005 at 12:17 am #59346
how’s the epic stock kevsta?
has any1 used or seen a tamiya stock tz in action? they any good? -
April 21, 2005 at 12:24 am #59347
tamiya stock motors are pretty bad want to be fast in stock racing get a EA tuned trinity monster horsepower
-
April 21, 2005 at 2:04 pm #59356
so i should avoid the tamiya tz and rz and go for the trinity horsepower? the tamiya ones are 23t i’d expect something faster from 23t.
Edited by – mocky on 21 April 2005 10:14:34
-
April 21, 2005 at 2:42 pm #59357
mocky thats becasue in japan stock is 23T not 27T one of the Tz or TZ is 27T.. the 23T is illegal..
unless ur racing TCS stick to trinity -
April 21, 2005 at 4:56 pm #59358
merc blue how bout the epic binary 2 outlaw pro vs the epic binary 2 outlaw stock vs the trinity monsta horsepower ?
which one? -
April 21, 2005 at 5:26 pm #59359Quote:merc blue how bout the epic binary 2 outlaw pro vs the epic binary 2 outlaw stock vs the trinity monsta horsepower ?
which one?Epic & Trinity run by same guy, all stuff come from same factory. :dead:
Binary has split magnets which is illegal for US ROAR stock class.
Usual stock standards are Monster (high revving) or P2K (more torque).
Just adjust your gearing to suit the motor’s style and either one
will go just as fast – if you know how to drive them to their max.“Pro” motors just means you pay a few bux more for a dyno sticker.
-
April 21, 2005 at 7:04 pm #59361
What sort of rollout is considered safe for a epic stock motor ?
Is 26-28mm okay ?
-
April 21, 2005 at 7:18 pm #59362
Dunno about the Epics but the P2K2 can be geared
down to about 5.5:1 on touring rubber tyres
on a large track.The Monster needs to rev so 6:1 is about it.
-
-
AuthorPosts
- You must be logged in to reply to this topic.