i lowered my BCG… now touching up…

Home › Forums › Bit Char-G, Digi-Q and other Micros › Bit CharG and Micro Radio Controlled – Technical › i lowered my BCG… now touching up…

Viewing 4 reply threads
  • Author
    Posts
    • February 4, 2003 at 11:09 pm #10862
      birdwig
      Participant
      • Posts: 4

      okay. there is a slot in the back and a slot in the front for the corresponding tabs to fit into on a BCG body. i made my slots go up like 2x higher on my char-g. it looks awesome lowered, but now what do i do with the bottom half of the new slots? i was thinking of either filling it with some testors contour putty, but i think that might break as the tab tries to force its way higher into the new slot. i was also thinking of trying to find a piece of rubber to glue onto the bcg body, basically where the old slot was. if you have any other suggestions let me know…? thanks

      see pics of my skyline and its oversized slots for the tabs:
      http://members.aol.com/bmxininwc/picture17.jpg
      http://members.aol.com/bmxininwc/picture18.jpg

      oh, and here are some other pics… please tell me it looks lower than stock… :
      http://members.aol.com/bmxininwc/picture16.jpg
      http://members.aol.com/bmxininwc/picture15.jpg

      thanks

      Silver Honda S2000
      White Nissan Skyline
      Blue Subaru WRX
      White Honda Accord Wagon
      i’ve got a 3.5 & 3.0 motor that rotate into each of these now and then, along with 2 celica bodies.

    • February 4, 2003 at 11:36 pm #41726
      Shypo
      Participant
      • Posts: 2339

      use some putty and paint it white cos thats easiest

      —-
      Go Fast, Be Free with Low CC

      Undisputed Post Pimp

    • February 5, 2003 at 2:34 pm #41703
      Genspec
      Participant
      • Posts: 37

      How about make something up to go in the slot that can be removed, rotated and placed in the top of the slot to raise the shell again if required. Something like a grommet that can be turned upside down. Just an idea.

      Initial D
      Skyline
      Castrol Supra
      Nano Celica

    • February 6, 2003 at 5:42 pm #41665
      DaveF
      Participant
      • Posts: 1038

      Nice thinking Genspec.

      and Yeah, it’s lower.

      ????????????????????????
      DaveF! 👿
      My track – http://community.webshots.com/album/58669595eliwuK

    • February 6, 2003 at 8:49 pm #41622
      Shypo
      Participant
      • Posts: 2339

      like a peice of plastic from a KIT racer guide bumper sprue

      —-
      Go Fast, Be Free with Low CC

      Undisputed Post Pimp

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.