Dracer07

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • March 7, 2005 at 10:10 pm in reply to: question for Monster owners… #58807
    Dracer07
    Participant
    • Posts: 13

    When you try to pop a wheelie do the gears slip and just click and not mesh. If so i had the same prob. Check and see if your spacer is in. Mine fell out while i was changing motors and i thought it was messed up. Ya the lil black thing that goes into the motor heatsink wasnt there. Go see if ure missing it.

    April 30, 2004 at 5:05 pm in reply to: Problem with my ZZ #51149
    Dracer07
    Participant
    • Posts: 13
    Quote:
    dracer07 try turning the controller on befor you put the car on
    this happened to me too thats what fixed it for me

    I do that and it still wont work.

    April 29, 2004 at 2:01 am in reply to: Problem with my ZZ #51103
    Dracer07
    Participant
    • Posts: 13
    Quote:
    Check the wires when you’re in there. Specifically the red and the black ones.

    All the wires are fine. Something must be fried. Ill just try to muster up some more money and buy another one and use this one for parts or tests.

    April 27, 2004 at 4:35 pm in reply to: Problem with my ZZ #51043
    Dracer07
    Participant
    • Posts: 13

    Ok, the front wheels wont turn. The rear wills wont roll. It doesnt go when i put it on the charger and press on the accel. I havnt done any modifications to it yet. but ill try the battery terminals.

    April 27, 2004 at 12:28 pm in reply to: best spot to score an Xmod?? #51030
    Dracer07
    Participant
    • Posts: 13

    yes. Xmods do suck. I spent over $150 dollars total just for most of the parts to break. They arent very reliable. Just stick to Mini-Z.

    April 27, 2004 at 10:38 am in reply to: Problem with my ZZ #51027
    Dracer07
    Participant
    • Posts: 13

    It is the original ZZ that i have. I fried the pcb on my SE the first hour that i bought it.
    Leoni, my controller is fine, i was just confused if my controller was messed up. thanks ne ways.

    April 26, 2004 at 2:22 pm in reply to: Problem with my ZZ #50999
    Dracer07
    Participant
    • Posts: 13
    Quote:
    try pressing on different parts of the pcb while holding a controller button down. maybe it looks connected but isn’t. tried different motors/batt’s in it yet? maybe your homie aint the shizzle after all?!!:dead::8ball:

    I havnt tried that yet but i tried pulling them out and yes they were all connected, ill try it ne ways. I havnt tried motors because it will not turn either. And i have replaced inside the car battery and remote batteries. Question: Is the green LED in the controller supposed to turn red when you move or just when you charge the car.

    April 26, 2004 at 6:30 am in reply to: Problem with my ZZ #50995
    Dracer07
    Participant
    • Posts: 13

    Can anyone help me out on this.

    April 24, 2004 at 3:48 pm in reply to: Problem with my ZZ #50975
    Dracer07
    Participant
    • Posts: 13

    Thats not it because i have charged repeatedly while controller was on. Still the car wont move or turn.

    April 13, 2004 at 1:17 pm in reply to: Li-Ion Cells #50741
    Dracer07
    Participant
    • Posts: 13

    If u want to check out this guys car, go to http://www.atomicmods.com . Why dont Xmods require FET’s and Z’s do. The FETs just allow that built up voltage to go through easier to the motor. Doesnt this apply to all ESC’s.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)