aquaman02

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 16, 2005 at 6:32 pm in reply to: Steering at Full Left #58539
    aquaman02
    Participant
    • Posts: 11

    It is an Xmod Electronics package. I soldered in a new 20g motor and battery wires, turned everything on, and when I turn on the transmitter, the wheels move hard left. I tried adjusting the screw on the reciever after scraping off the wax., but that did nothing… I also tried the buttons on the transmitter, to no avail.. Why is this thing going full left on me.. The motor seems to be working in both forward and reverse.

    February 8, 2005 at 10:45 pm in reply to: my “Woah Nelly!” Turbo…. #58397
    aquaman02
    Participant
    • Posts: 11

    I realize this… This will have lith ions, and a nelly deluxe if I can figure out when it will be available. It looks like it will have a cleaner look as a board type.. A powerplant on wheels is the direction that I am heading.. hehe

    February 8, 2005 at 1:41 pm in reply to: my “Woah Nelly!” Turbo…. #58393
    aquaman02
    Participant
    • Posts: 11

    Hello,, I have tried to email the owner of the Whoa Nelly website, but have not gotten a reply… My fets are currently not working correctly on my skyline and I was going to just replace, or upgrade to the Whoa Nelly..

    My problem is that I don’t want to just shell out the money for the Nelly right now if the Nelly Deluxe is coming soon.. When will the Nelly Deluxe be available… I am waiting on this so I can get this car up and moving, can’t really do much with this until I upgrade my fets..

    February 8, 2005 at 1:40 pm in reply to: my “Woah Nelly!” Turbo…. #58392
    aquaman02
    Participant
    • Posts: 11

    Hello,, I have tried to email the owner of the Whoa Nelly website, but have not gotten a reply… My fets are currently not working correctly on my skyline and I was going to just replace, or upgrade to the Whoa Nelly..

    My problem is that I don’t want to just shell out the money for the Nelly right now if the Nelly Deluxe is coming soon.. When will the Nelly Deluxe be available… I am waiting on this so I can get this car up and moving, can’t really do much with this until I upgrade my fets..

    February 2, 2005 at 9:51 pm in reply to: no power #58359
    aquaman02
    Participant
    • Posts: 11

    I charged the batteries a little bit and was able to see the pinion gear jiggle a little in each direction, but that is it. I felt the bottom of the board and nothing heated up though…. ??? If the FET’s are fried why would I still be able to have almost full voltage as the batteries at the motor wires..

    It just goes to about 1 – 1.2volts at the motor itself.. It is strange that this is the same problem with both of these EP’s. I am not sure why they were returned but it didn’t look like the previous person put any high voltage stuff to them.. Could the FET’s have been messed up when the thing was still new.

    February 2, 2005 at 7:09 pm in reply to: no power #58354
    aquaman02
    Participant
    • Posts: 11

    I just checked the voltages in the other car,, it is the same exact thing… I can steer, but have to output at the motor. I still have voltage to the plug for the motor, but on the motor itself, after I plug it in, I have almost no voltage.. I tried to put a newer battery in to help the voltage, but still a minimal 0.8volts to the motor. Please Help…..

    January 28, 2005 at 3:06 pm in reply to: Iwaver 02 PCB #58301
    aquaman02
    Participant
    • Posts: 11

    I didn’t know I need to be that specific.. I wasn’t asking for someone to just give me a PCB…. I need to buy one from someone who has one… Does anyone have an Iwaver02 PCB that I can buy?

    Betty k. Isn’t the Xmod servo worse than an HS-55.. I thought that the Xmods weren’t stepped as much as the mini-z and such,, hence the better steering in the kyosho cars..

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)