ph2t

Forum Replies Created

Viewing 25 posts - 1,476 through 1,500 (of 1,934 total)

← 1 2 3 … 59 60 61 … 76 77 78 →

Author

Posts
July 30, 2003 at 5:22 pm in reply to: So who s gonna be tha first? #46453
ph2t
Participant
- Posts: 2088
The race is on!
July 29, 2003 at 8:14 pm in reply to: headlights???? #22243
ph2t
Participant
- Posts: 2088
Most times Shypes the voltage of the batt (1.2V) is too low to power most LED’s (Assuming the_bit is talking led’s here). I *think* the lowest voltage is about 1.6V (for a red LED) the highest I’ve seen is 3.6V for some ultrabright blue LED’s.

The most popular is to use a 3V lithium battery and wire the leds to that. Although ideally you should also wire in a 220Ohm resistor to limit current to the LED’s.

I’ve been building DCDC converters that take the 1.2V from the bar’s batt and raise it up to 5V, very handy for driving those LED’s. And it runs off the car batt so no replacing the lithium battery.

If there’s enough interest I might bring out my own headlight kit based on these dcdc converters….

ph2t.
July 29, 2003 at 1:28 pm in reply to: More frequencies for Bitchar? #22231
ph2t
Participant
- Posts: 2088
Pics have been posted, you can see them HERE.

ph2t.
July 29, 2003 at 1:11 pm in reply to: I’ve finished my work on 2 new overland bodies #22230
ph2t
Participant
- Posts: 2088
Dang man that’s some mad work right there. Makes me wanna buy a Z just to put lights on it, lol!

ph2t.
July 28, 2003 at 5:43 pm in reply to: Knight Rider Lights….. #22217
ph2t
Participant
- Posts: 2088
Thanks dude, you’d appreciate it, I used circuitmaker2000 to create the pcb.
July 28, 2003 at 4:59 pm in reply to: Should VR-4 have english lessons? #22211
ph2t
Participant
- Posts: 2088
Quote:

So ph2t is starting threads whinging about others……am i a sitting duck??:smiley2:

Just astute observations Jamie…. I don’t have my shotgun so you’re safe, lol!

ph2t.
July 28, 2003 at 3:07 pm in reply to: Knight Rider Lights….. #22204
ph2t
Participant
- Posts: 2088
Here’s the finished PCB:

Here’s some video of the PCB in action: HERE

Here’s the KITT2000 from Knight Industries:

Here’s some video of the car in action with a very graphic and violent ending….. :dead:

VIDEO

I will be making a limited amount of these for those who are interested. The only problem is they are not cheap ($30 USD inc shipping) and there will be a min 2 week turnaround. Sorry but it ain’t the easiest to make, as you’ve seen in this thread. I wasn’t going to do this but I thought that some fellas would appreciate….. Enjoy. Email me at ph2t@prahranpianos.com for info.

ph2t.

Edited by – ph2t on 28 July 2003 11:09:34
July 28, 2003 at 2:13 pm in reply to: Holy Moly #22203
ph2t
Participant
- Posts: 2088
“First you get zee money, then you get zee woman.”

Tony Montana….
July 28, 2003 at 2:10 pm in reply to: Micro springs #22202
ph2t
Participant
- Posts: 2088
I just scored about 30 dds tapes from a cleanout we did! So I’m gonna be putting them on the SBCG anyways…. That’s if they don’t have ’em..

ph2t.
July 28, 2003 at 1:41 pm in reply to: Micro springs #22199
ph2t
Participant
- Posts: 2088
Will know in about a week.:)
July 27, 2003 at 2:47 pm in reply to: flames on my subaru #22183
ph2t
Participant
- Posts: 2088
Are they painted or decals? looks good..

ph2t.
July 27, 2003 at 3:10 am in reply to: Micro springs #22176
ph2t
Participant
- Posts: 2088
See this thread HERE.

ph2t.
July 27, 2003 at 2:56 am in reply to: So who’s gonna be tha first? #22175
ph2t
Participant
- Posts: 2088
lol! dude.
July 27, 2003 at 2:56 am in reply to: So who s gonna be tha first? #46440
ph2t
Participant
- Posts: 2088
lol! dude.
July 27, 2003 at 2:37 am in reply to: So who’s gonna be tha first? #22171
ph2t
Participant
- Posts: 2088
Nah, just conned barto out of some paypal $$$. lol!
July 27, 2003 at 2:37 am in reply to: So who s gonna be tha first? #46438
ph2t
Participant
- Posts: 2088
Nah, just conned barto out of some paypal $$$. lol!
July 26, 2003 at 5:57 pm in reply to: Knight Rider Lights….. #22161
ph2t
Participant
- Posts: 2088
Here’s some pics of the 1st prototype:

ph2t.
July 26, 2003 at 5:55 pm in reply to: Micro springs #22160
ph2t
Participant
- Posts: 2088
Quote:

if you make a sway bar softer its the same thing as softer springs but your talking about very little shock travle and really it isent worth doing anything for it.

Crap!:evil: The sway bar causes one side to raise when the other side goes down and vice versa, like a see saw. Springs offer independent front end suspension.

ph2t.
July 26, 2003 at 3:56 am in reply to: Should VR-4 have english lessons? #22149
ph2t
Participant
- Posts: 2088
He prolly voted for the “stupid poll” option. Although these americans don’t like the piss being taken out of ’em…. No sense of humor sometimes…..

ph2t.
July 26, 2003 at 3:40 am in reply to: Extended charging times on your controller #22147
ph2t
Participant
- Posts: 2088
This is typical:

uA = better design

panda = hack!

lol!

ph2t.
July 26, 2003 at 3:34 am in reply to: Holy Moly #22145
ph2t
Participant
- Posts: 2088
Quote:

Anyone steals mine and I will go Tony Montana Style On you.

Say hello to my little friend!

BAM
July 26, 2003 at 3:05 am in reply to: Should VR-4 have english lessons? #22139
ph2t
Participant
- Posts: 2088
Now that’s @#$%^& funny!

*falls off chair*

thump!

ow!

blackeye:

ph2t.
July 26, 2003 at 2:59 am in reply to: Knight Rider Lights….. #22138
ph2t
Participant
- Posts: 2088
Yup, I’m using a 5V convertor and it drains approx 5mA of current.
July 25, 2003 at 3:35 pm in reply to: So who s gonna be tha first? #46423
ph2t
Participant
- Posts: 2088
Bought the package…..:D
July 25, 2003 at 3:35 pm in reply to: So who’s gonna be tha first? #22096
ph2t
Participant
- Posts: 2088
Bought the package…..:D
Author

Posts

Viewing 25 posts - 1,476 through 1,500 (of 1,934 total)

← 1 2 3 … 59 60 61 … 76 77 78 →