me and me lude

Forum Replies Created

Viewing 16 posts - 26 through 41 (of 41 total)
1 2
  • Author
    Posts
  • January 18, 2003 at 12:48 am in reply to: Disc Brakes For Mini Z #44319
    me and me lude
    Participant
    • Posts: 42

    hehehe rice!!!

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 18, 2003 at 12:46 am in reply to: sydney mini-z racing #44318
    me and me lude
    Participant
    • Posts: 42

    “um i think u mean FETs not crystals..crystals are what governs the freq…3004 are what come in the z and IRF7389s are what most people use…im not sure they are the best tho..aparantly people use “secret” FETs, stingy bums wont say what they use…
    and also i found out that dse, jaycar, and altronics dont have crystals over 10mhz… but i can get 25mhz easy enough..would this work?”

    hahahahaha soz…. i was thinking fets.. and typed crystals….

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 17, 2003 at 11:39 pm in reply to: mZ ball bearings? #44309
    me and me lude
    Participant
    • Posts: 42

    i don’t think any other manufactorer makes them

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 17, 2003 at 11:37 pm in reply to: Disc Brakes For Mini Z #44307
    me and me lude
    Participant
    • Posts: 42

    hehee get a f1 pcb swap

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 17, 2003 at 11:36 pm in reply to: sydney mini-z racing #44306
    me and me lude
    Participant
    • Posts: 42

    which crystals are best?
    the 73789, 3004 (numbers somehting like that… i can’t remember…)

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 17, 2003 at 9:19 pm in reply to: mZ ball bearings? #44295
    me and me lude
    Participant
    • Posts: 42

    yeah mini-zracer.com have dry ceramic balls that are supposed to be better

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 10:36 pm in reply to: Welcome back Ausmicro! #44243
    me and me lude
    Participant
    • Posts: 42

    “When a factory manufacture a cell, even with the tightest quality controls you will still get a varied range of quality coming out the other end. What the company does is then *test* the cell, and then grade them according to specs.”

    that’s exactly how computer processors are done as well
    it’s a cheap way to manufacture, cause there is only 1 process (instead of a 700mAh production line, 800 mAh production line) and also hardly anything is thrown out, it just gets labelled to a lower rating

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 10:30 pm in reply to: sydney mini-z racing #44240
    me and me lude
    Participant
    • Posts: 42

    how old is everyone?
    just wondering…

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 8:33 pm in reply to: sydney mini-z racing #44227
    me and me lude
    Participant
    • Posts: 42

    cool…
    is this an everyone is welcome thing?
    what kind of set up are you guys running?

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 8:30 pm in reply to: Gold and Rep. points?? #43190
    me and me lude
    Participant
    • Posts: 42

    yeah i’m talking about mong kok
    i wasn’t interested in the pullbacks so i didn’t ask for the price…
    you can get bits in toysrus!
    clones are very rare in the hobby shops, you really have to go to cheapo places to get them…

    the cheapest min-z i could find were $498
    you can get any body for $580
    you just have to look around

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 1:51 am in reply to: Gold and Rep. points?? #43762
    me and me lude
    Participant
    • Posts: 42
    Quote:
    You kiddin’? Of course!! :blush:

    Unfortunately nothing much of interest out there,
    especially on the Tomy side of things… boring.
    Just saw the usual Wild Char-G duo, a whole lot of bus BCGs, SpeedRacers etc. Spare bodies just the few usual ones.
    Didn’t see any pullback BCG cars, just the PennyRacer ones.

    Pricewise nothing spectacular either, in HK they’re about
    HK$200 (A$50) for a std BCG kit. The newer ones like
    AutoModellista are up to HK$300, some unpopular oldies
    as low as HK$130. Prices are “after negotiation” btw;
    there’s no such thing as sticker prices and if they
    suss you’re a tourist they’ll be out to skru you.
    I think I just pass as a ‘local’. 😉

    Takara’s Digi-R is out (with ‘real’ steering) as is the
    Yokomo Puchimaru (sp?), but I don’t think these were cheap.
    I didn’t get time to demo either of these.

    Kiddies in HK and S’pore/Malaysia are into some silly
    “battle tops”… from my last visit to TRU, I think the
    same craze is here with us too.

    Bomberman is passe.

    ummm did you go to the right place?:p
    i’m on holiday in hk right now…
    brand new ae86 trueno digiQ-R’s for hk$280
    mini-z’s for hk$500-600
    also seen the bit char-g pull backs

    ________
    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 16, 2003 at 1:38 am in reply to: sydney mini-z racing #44203
    me and me lude
    Participant
    • Posts: 42

    so where do you people normally race?
    i’m getting a mini-z in a few months…

    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 15, 2003 at 6:56 am in reply to: Castrol Pitwork GTR #43305
    me and me lude
    Participant
    • Posts: 42

    no worries, is the digiQ forum always this quiet?

    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 15, 2003 at 12:58 am in reply to: charger? #44184
    me and me lude
    Participant
    • Posts: 42
    Quote:
    lol…you guys wait a whole HOUR for your batteries to charge??? Man my charger takes 20 mins and i still hate waiting.
    I charge at about 2.4 A and put the batteries in a gel ice pack to keep them from self destructing.

    hahahaha that is funny… you could just get 2 sets of batteries

    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 15, 2003 at 12:56 am in reply to: motor rewinding #44183
    me and me lude
    Participant
    • Posts: 42

    do you people water dip your motors?

    Epoch Indoor Racer: Legacy B4 (Spec-2)
    DigiQ-R: NSX-R

    January 15, 2003 at 12:37 am in reply to: Castrol Pitwork GTR #43314
    me and me lude
    Participant
    • Posts: 42
    Quote:
    this will be my first Digi Q, does anyone know why this one is more expensive than others, i am getting a good deal on it but is it a Limited edition or soemthing

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    it’s because the gtr has decals and it’s own controller

  • Author
    Posts
Viewing 16 posts - 26 through 41 (of 41 total)
1 2