peteWah
Forum Replies Created
-
AuthorPosts
-
Quote:yeah i thought negative camber was the top leaning in, i only know this coz my datto has it on the rear wheels……..something about wornout suspension i remember being told LOL
SWEEEEEEEEEET duDe
Are there any situations where outward leaning wheels are needed?
In everyday driving it happens Betty, Say if you had a car steering in full left lock,
The wheel on the left would be pointing outward
(bottom of the tire away from the center)And the wheel on the right hand side inward (top of the tire towards the center)
All this while looking at the front of your car…You can test this theroy if you want by jacking up the front end of your car and turn the wheel all the way to the left… what happens?
Need i say more
Go and have a look at those links that
Super Max posted…YOU ARE SO WRONG
You can eat my left testicle if i have to get it removed in the near future… (Ive said to much)Betty; Uh, you mean positve not outward leaning dont you, well anyway your wrong :smiley2:
Nascar, IRL and CART do it every day of the week and they only go left, Its so obvious
Oval racing, Think about it… Go back and READ those links :smiley2::D:D:smiley2::p:approve::8ball::dead::question:Or away from the center:question::8ball:
Quote:Quote:Sorry dude should of quoted dave.Im directing this at Dave…
In refrence to yourself and your car(iwaver) being at daves for 2 weeks in one of my posts I was just saying HELLO to youDave just wants to arrgue the fact, I ****ing know better….
Dave and i are not the best of friends ATMif I did’nt have to carry you financially through life things’d be different.:dead:
And i was doing what for you all those years ago when you were in a bad spot in life…
Get real
Sorry dude should of quoted dave.
Im directing this at Dave…
In refrence to yourself and your car(iwaver) being at daves for 2 weeks in one of my posts I was just saying HELLO to youDave just wants to arrgue the fact, I ****ing know better….
Dave and i are not the best of friends ATMQuote:i’ve had the same thing happen to me, and i cured it the same way you did. this also happens with larger motors that have bushings too.
and jamie’s right, i dropped a motor in a cup of tea once! it never skipped a beat and still runs fine!:8ball:Tetley thats my cup of tea:D:D:smiley2:
When dgs was first into the mini z he had the same sort of noise come from a stock motor
Ive never heard that noise come from a 540, nor do i wannaUm…. yes, Remember mockey showing up and dropping it of the week nobody was going to show up, The day after we went to brush farm with TD (hello)… and i was not there last sunday the 15th so that makes 2 weeks dose it not STUPID
Appology Please
Quote:I might as well put what I do then… its already half here…Dont be a dick about it…
Quote:easy just tape wires on and other side to a single AANo merc i did not run a AA batt on it, but i guess you could…:D
Dave i was running the motor in the chassis with no pinnion and just poured the oil on to the spindle itself and run the motor back and forward for a few charges, then cleaned up any spillage in the chassis afterwards, There was not much spillage but be carefull, You dont need much of this oil
You could do it the way Merc said to but i dont know where the neg – point is on a motor but the poss + it seems is clearly marked on most bit motors…
On a dremel like what dave said but i realy think they should soak first. Thats what i would do…
Unless jamie dose somthing different before he spins them out, Im only guessing :):smiley2::approve:Yeah, i think what he dose (this is a guess)
Is soak his bearings in kero or somthing of the like and then runs them till they are completely bone dry, This would help in the cleaning process i guess, Or im completely wrongJamie what is the process man….:smiley2::8ball::question:
Has been for 2 weeks has it not:smiley2:
Yes they have mocky, Check the second page again…
WWWYE BOY:D:smiley2:Here is a bumper for a MRO1, This may help:smiley2:
http://www.rcmart.com/catalog/product_info.php?cPath=144_21_76_471&products_id=193
:D:D:smiley2:
Quote:cheers to both of us for neither of us crashing it… dunno ’bout the extra cells but matey…blackeye: not at this point anyways…:smiley2:This is what i meant to say, Extra cells not needed because of the extra speed you have yet to achieve with bigger pinions and such…
:p:D:D:smiley2:Edited by – peteWah on 10 August 2004 17:11:32
Quote:c’mon dave, spill ya bastard! what did it clock on the old tammy speed checker? what pinion was being used? and lastly, how many cells?You can spill you gutts too, Not just you Ph2t, What setups are you melbourneknights running
Quote:c’mon dave, spill ya bastard! what did it clock on the old tammy speed checker? what pinion was being used? and lastly, how many cells?You can spill you gutts too, Not just you Ph2t, What setups are you melbourneknights running
Extra cells will be added to this car at a later date, Yes i said later, Still more speed to be had yet…
(cheers to me for not crashing it) LOL:smiley2::DExtra cells will be added to this car at a later date, Yes i said later, Still more speed to be had yet…
(cheers to me for not crashing it) LOL:smiley2::DQuote:I think dgs73’s car will be hard to beat……I know dgs73’s car will be hard to beat…… After having the car passed to me and the words have a go, Now i know…
It was the Fastest ive seen the GTR run in its JK motor history…
VA VA VA VROOM 😀Quote:I think dgs73’s car will be hard to beat……I know dgs73’s car will be hard to beat…… After having the car passed to me and the words have a go, Now i know…
It was the Fastest ive seen the GTR run in its JK motor history…
VA VA VA VROOM 😀What time frame are we looking at:smiley2:
What time frame are we looking at:smiley2:
IYCSANDSAAA, SBAD figure that out PHAT man and stop giving me shit:evil:
BE NICE:smiley2: and fix your avartar, IDRGAFE !
IDLI at all, Even after i praise the work you do….. :dead::evil::evil::evil:Edited by – peteWah on 04 August 2004 10:45:18
-
AuthorPosts
