peteWah
Forum Replies Created
-
AuthorPosts
-
:worship: When i get a AWD expect a order for 1 of these about a month after….
And when can i expect to be able to order a AWD chassis set of you, 1 was thinking early or mid FEB
The site is top notch BTW… :clap:
There you Go….
There you Go….
Jamie i have to get some more parts before i can set it up like that again…
You no im not a tech head…
I do however have a pict on my phone just showing the 99kph.
I can get the motor tested on the dyno again and get video.
Do you still have a s**t hot Z or not…
And what the hell is that cunlink…
What what what, I do not recall >>> Enlighten Me Please…
That BB can is an audley can and they are crap….
I put a stock armature in 1 just to go a bit faster and burnt out stock fets in my 01 last year…
Buy the Pn bb cans or Atomic…
That BB can is an audley can and they are crap….
I put a stock armature in 1 just to go a bit faster and burnt out stock fets in my 01 last year…
Buy the Pn bb cans or Atomic…
We banked up 1 of the corners on the track in the last few days…
The extra speed 1 can carry in that sweeping turn is just Cunuts :smiley2:
99kph on a speed checker with 4 cells, Beat That :p:smiley2:
A 01 with 2×4 stack of 7317 s with a iWaver X speed pro which has the spiral armature in it which is a fatboy armature
me thinks….We tested this motor on a Much More motor thingy and it clocked out at over 60.000 rpm and im not sure on the exact figures that go with it….
Youcandoit… Captain Condom :smiley2: ROFL
Its as neat as it can be i guess , Nice job….
So now that we have the AWD and a Tamiya speed checker works on 4 wheels has anyone had a go with it yet and what was the read out…
rcs2die4,
Do you have a TSC ? I would love to know the read out of a fetted AWD…Aaron,
I know you have a TSC, what are you getting with the Speedy NM or the 05 NM you are using… Or have you posted on this already :dead:Ph2t,
get your Butt into gear and exploit the bloody thing like i know you can :smiley2::pCheers Guys…
Edited by – peteWah on 06 January 2006 13:29:07
My steering motor went in my overland so i sprayed some lubricant into it and it now works fine….
Yes but 1 would need a Internal or external turbo to run 5 cells…
Most cells are 1.5 volts and a stock board regulates at 6v…
Dose this help. :smiley2:
What is the motor doing… :huh:
Yes please :smiley2:
Nice RIDE there mate, You going to Blast it up here at some point.
Just put the AWD in a back pack and we will see you in no time :D:smiley2:
Did 1 have to cut the chassis top lid to install those fets :huh:
You got it in 1 Betty. :smiley2: That why i am buying it and where i am they get 30 + days all through summer
Yesterday in Couridjah = Place of the ANT it was 40.2
And again yes we are having a few 40 + days in the next few days up in Sydney…
Where i’m moving to has a pool that at the moment is no good but will be fixed and a largish fresh waster lake 5 mins walk down the road…
And yay i cracked the 1000
:p:p:p:smiley2: 1001
Im going to wait till mid feb to get my AWD, by that time there should be more after market parts around and the said market for these cars wont be so cut throat…
You guys that have them can be the pioneers
Im going to pioneer a mini z boat before then and there are only two things you can buy for it , Props and a aqua speed upgrade motor A.F.A.I.K… And batteries of course but it comes with 1 that goes in the boat and takes AA’s in the charging unit which is the trailer… Cant wait :smiley2:
That was a good read :smiley2:
ALSO
Can Moderators please move topic to where it should be please…
ALSO
Can Moderators please move topic to where it should be please…
Yes,
There is no difference at all but read the info below and chose the spider you think is going suite you best, I would go for the lead version
And there is a Terminal block option for if you are going to swap motors all the time and unlike the lead version you dont have to solder wires on and of…
Read this for the Bare Board
http://shop.ausmicro.net/product_info.php?cPath=21_24&products_id=250
Read this for the Lead Version
http://shop.ausmicro.net/product_info.php?cPath=21_24&products_id=249
-
AuthorPosts