peteWah
Forum Replies Created
-
AuthorPosts
-
Ask how Aaron did it when he gets back…
Learn To Drive Kev…
Why not come and have a go on the track at Dave’s some time…
What we did on the original track was bad because Yes the foam edges were easy to clear on impact, There are pics on the original thread with the revised matts which are now using a coloured mat from clarke for the edges and it works fine…
Its on the same mid setting, The car would be a little shorter than the Rx7 which would make it a lot of fun on the foam track…
Its on the same mid setting, The car would be a little shorter than the Rx7 which would make it a lot of fun on the foam track…
Funny, Where do you think i got the original idear from when it came to building the other stuff, Now he is making his lanes wider by half a matt ?
Learn to drive Kev… LOL
Funny, Where do you think i got the original idear from when it came to building the other stuff, Now he is making his lanes wider by half a matt ?
Learn to drive Kev… LOL
How to use PN motor in AWD
1. Take all the connect wire and 104 cap.
2. open the motor can, change to opposite direction, put the big two face to bottom, get more air to cooling down
3. solder the red and black wire opposite position.http://www.pnracing.us/new/news_imag…148-1.jpg?r=45
http://www.pnracing.us/new/news_imag…149-2.jpg?r=42
http://www.pnracing.us/new/news_imag…149-3.jpg?r=33
And while i was looking around i saw the new So4…
http://www.pnracing.us/new/product.p…=product&id=75
I posted this for you else where Z but its clear you did not read it…
Nice R390…
Some people want the world, Just go the way your going….
I would die for 1 that size…
z-beam wrote:id really like to get a titanium center shaft next and add some more power using a neo mag so5. im a bit worried that ill snap the capacitors off it by bending it though…Its not neo dude, look at the link.
http://www.pnracing.us/new/product.php?show=product&id=218
How to use PN motor in AWD
1. Take all the connect wire and 104 cap.
2. open the motor can, change to opposite direction, put the big two face to bottom, get more air to cooling down
3. solder the red and black wire opposite position.http://www.pnracing.us/new/news_image/20051215-180148-1.jpg?r=45
http://www.pnracing.us/new/news_image/20051215-180149-2.jpg?r=42
http://www.pnracing.us/new/news_image/20051215-180149-3.jpg?r=33
And while i was looking around i saw the new So4…
:topstuff: Primary Aaron mobile i’m Guessing :topstuff:Its a model,
Your not reading are you Z…
Hence Aaron saying he would need wheels to compliment it, Der :8ball:
:big: :question: :laser:
As a autoscale they come with those mad i don’t know how many spoke rims…
I will be watching BTTF2 tonight :topstuff:
15 mins away
No it was to gain a matiria to finish the game i think, and to race but that was a gold saucer thing…
There are a few other FF comic strips in those archives 1 that takes the shit out of breeding chocobos…
Not sure where but i got to see a TFTF lancer on a AWD CS, lets just say (drooooools bigtime) that those rims suite the Lancer 100%
Pist much…
The RC god was listening to me….. Do yo know of any others Ken ?
Now i know i will be getting at least that and some other 32’s when i get My Chassis Set…
I had a Calsonic AFX slot car which started me on the whole R32 thing…
Bring on the 300ZX please kyosho if you are reading this… Race speck !
BTW there are some funny game files in there, Dave is a Chocobo
Inbreeder…I remember that the first copy of FF7 Dave had took a flying lesson of a 8 story apartment block after not being able to breed a Gold chocobo…
We were finding bits of that game in West Ryde for weeks…
Why not use your N70 to log in with its browser…
Will do…
Yeah, Get a mini z… You will have a ball with it and you have multiple setup options…
Like this custom paint job i had done on this sprinter, there is so much you can do with a Z
Go to a Battery World and get some Sonyo 900mah NIMH batteries if you want good ones…
hey dude, check mine (Morbid Monaro) out! its pretty rare but can be found with some dedicated searching
yo dude, it jay on pete’s login(cause mine’s stuffed!!!!!) i’ve got the factory team RC18T & it rocks, i’ve mamba 8000 in it & my god it turns heads, i think it a bit too quick for the track so i got the 5400, mmmmmmm though i am thinking of getting a B & adding the factory team hop ups, lets dwell on that
KittyKatSmack wrote:I’m here again 🙂Great work Aaron!
Looks fantastic, hope you are mega proud of yourself, ausmicro.com is the success it is due to all your hard work and efforts.so who’s up for planning a big meetup on ausmicro.com’s birthday this year?
Cheers y’all
Great site Guys, Pitty about the post loss but hay > Whos counting…
As for ausmicro.com’s birthday this year? > Im up for It < What dose 1 have in mind ?
-
AuthorPosts