ph2t

Forum Replies Created

Viewing 25 posts - 576 through 600 (of 1,930 total)

← 1 2 3 … 23 24 25 … 76 77 78 →

Author

Posts
August 6, 2004 at 3:09 am in reply to: racing at templestowe… #54230
ph2t
Participant
- Posts: 2088
we missed you R !!
August 6, 2004 at 3:09 am in reply to: racing at templestowe… #54588
ph2t
Participant
- Posts: 2088
we missed you R !!
August 6, 2004 at 1:04 am in reply to: rcmart group order #54227
ph2t
Participant
- Posts: 2088
do you think the topcad graphite rollshock set will be long enough to keep the roll shocks vertically straight when using the longest wheel base. this is the issue I’m having….

ph2t.
August 6, 2004 at 1:04 am in reply to: rcmart group order #54585
ph2t
Participant
- Posts: 2088
do you think the topcad graphite rollshock set will be long enough to keep the roll shocks vertically straight when using the longest wheel base. this is the issue I’m having….

ph2t.
August 5, 2004 at 9:51 pm in reply to: rcmart group order #54224
ph2t
Participant
- Posts: 2088
Leon, I’d reccomend this set over the one you selected.

http://www.rcmart.com/catalog/product_info.php?cPath=144_506_105&products_id=2728

I’ve used both and I like the team homies more…

ph2t.
August 5, 2004 at 9:51 pm in reply to: rcmart group order #54582
ph2t
Participant
- Posts: 2088
Leon, I’d reccomend this set over the one you selected.

http://www.rcmart.com/catalog/product_info.php?cPath=144_506_105&products_id=2728

I’ve used both and I like the team homies more…

ph2t.
August 4, 2004 at 11:57 pm in reply to: Save the Servo gears #54209
ph2t
Participant
- Posts: 2088
trust me this is nothing. I saw a poor little kid on the w/e get his whole frontend smashed up (1/10 scale) when another car hit him side on, pow! The poor dude spent the rest of the day at the workbench…..

besides, the achillies heel in betty’s setup was the fact that EVERYTHING was alloy. not just the servo gears, but the tie rod and knuckles as well.

I have my 1st servo gear as alloy, but my 2nd and 3rd are 3 racing black delrin ones. My tie rod is PLASTIC, not alloy. Since going to this config I’ve barely had any issues…..

We’ll that and DRIVE WITH YOUR SHELLS ON PEOPLE!!!!!!

ph2t.
August 4, 2004 at 11:57 pm in reply to: Save the Servo gears #54567
ph2t
Participant
- Posts: 2088
trust me this is nothing. I saw a poor little kid on the w/e get his whole frontend smashed up (1/10 scale) when another car hit him side on, pow! The poor dude spent the rest of the day at the workbench…..

besides, the achillies heel in betty’s setup was the fact that EVERYTHING was alloy. not just the servo gears, but the tie rod and knuckles as well.

I have my 1st servo gear as alloy, but my 2nd and 3rd are 3 racing black delrin ones. My tie rod is PLASTIC, not alloy. Since going to this config I’ve barely had any issues…..

We’ll that and DRIVE WITH YOUR SHELLS ON PEOPLE!!!!!!

ph2t.
August 4, 2004 at 11:41 pm in reply to: 3000 posts for jamiekulhanek #30333
ph2t
Participant
- Posts: 2088
Quote:

LIGAF….i don’t even want to think what that means….tell me!!

mate, Like I Give a FrostyBigOne…..

haha!:p
August 4, 2004 at 6:23 pm in reply to: 3000 posts for jamiekulhanek #30336
ph2t
Participant
- Posts: 2088
you numbnut, my post was directed at jamie….
August 4, 2004 at 2:19 pm in reply to: this will smoke all the turkeys at tomorrow s meet #54202
ph2t
Participant
- Posts: 2088
yeah, that’s what I’m basing my circuit on. I was also thinking that you could put several light beams clost to each other and get an actual acceleration curve out of the data collected. Now that would be (nerdy) cool!
August 4, 2004 at 2:19 pm in reply to: this will smoke all the turkeys at tomorrow s meet #54560
ph2t
Participant
- Posts: 2088
yeah, that’s what I’m basing my circuit on. I was also thinking that you could put several light beams clost to each other and get an actual acceleration curve out of the data collected. Now that would be (nerdy) cool!
August 4, 2004 at 2:12 pm in reply to: 3000 posts for jamiekulhanek #30349
ph2t
Participant
- Posts: 2088
LIGAF!
August 3, 2004 at 3:00 pm in reply to: this will smoke all the turkeys at tomorrow s meet #54524
ph2t
Participant
- Posts: 2088
Quote:

Make provision for the Christmas Tree too!! 🙂

ok, you’ve lost me now dude….
August 3, 2004 at 3:00 pm in reply to: this will smoke all the turkeys at tomorrow s meet #54166
ph2t
Participant
- Posts: 2088
Quote:

Make provision for the Christmas Tree too!! 🙂

ok, you’ve lost me now dude….
August 3, 2004 at 10:59 am in reply to: Motor Endbells #54520
ph2t
Participant
- Posts: 2088
haha, yeah……

So, mr Max Power, get your name off a hair dryer?
Where you at dude? Melb? Syd?

ph2t.
August 3, 2004 at 10:59 am in reply to: Motor Endbells #54162
ph2t
Participant
- Posts: 2088
haha, yeah……

So, mr Max Power, get your name off a hair dryer?
Where you at dude? Melb? Syd?

ph2t.
August 3, 2004 at 10:45 am in reply to: this will smoke all the turkeys at tomorrow s meet #54519
ph2t
Participant
- Posts: 2088
I working on it wills. a $1 laser pointer, a LDR and a transistor can be coupled with a cheap a$$ stopwatch, if you get what I mean……
August 3, 2004 at 10:45 am in reply to: this will smoke all the turkeys at tomorrow s meet #54161
ph2t
Participant
- Posts: 2088
I working on it wills. a $1 laser pointer, a LDR and a transistor can be coupled with a cheap a$$ stopwatch, if you get what I mean……
August 2, 2004 at 12:57 pm in reply to: rcmart group order #54492
ph2t
Participant
- Posts: 2088
icebreaka, read the first post, all is answered…
August 2, 2004 at 12:57 pm in reply to: rcmart group order #54134
ph2t
Participant
- Posts: 2088
icebreaka, read the first post, all is answered…
August 2, 2004 at 3:19 am in reply to: another melb. meet #30415
ph2t
Participant
- Posts: 2088
Yeah, I couldn’t believe it either when I saw what had happened. Betty didn’t have the most succesful day in terms of steering. But he got there in the end. I was very happy with my mr01. In the end I OWNED the competition, kick both the two top speeders, ken and betty. But during the day my motor’s endcap became interested in doing it’s own thing and I dropped below the 30kph barrier…..Time for some motor maintenance.

Learnt alot on the track today though. It’s great to get some solid track time in and learn how you car reacts to various settings and configurations.

Then there was the time off the track………:D
Talk about crop patterns, lol…..

The Collection:

From left to right: Betty, ph2t, leon, kitsune, merc-blue and the last two are ken’s.

And here’s the usual suspects, minus your’s truly who’s taking the picture….

I’ve got some GREAT video, I will upload it shortly…..

cheers,

ph2t.
July 31, 2004 at 9:43 pm in reply to: MB hits 1000 #39568
ph2t
Participant
- Posts: 2088
HAHAHAHAHAHAHAHHAHAHAHAHAHAHAHA!

USE REALLY FUNNY BOSS!!!

😀
July 31, 2004 at 9:24 pm in reply to: another melb. meet #30492
ph2t
Participant
- Posts: 2088
hey kitsune, I’m all out man. All my orders are taken. I’ll see what I can do, I might have some nelly 1.1 fets spare, but I’ve used up all my IRF6609(nelly 1.2) mosfets.

gotta put that order in ASAP.

also, hopefully my li-poly madforce will be ready for tomorrow. haha….

ph2t.
July 31, 2004 at 1:24 am in reply to: AUSMICRO BIG BROTHER!! (not for kiddies eyes) #30585
ph2t
Participant
- Posts: 2088
Quote:

………….. was shypo come in as a intruder

lol, that’s a good one…
Author

Posts

Viewing 25 posts - 576 through 600 (of 1,930 total)

← 1 2 3 … 23 24 25 … 76 77 78 →