BilboFOL

Forum Replies Created

Viewing 25 posts - 26 through 50 (of 70 total)
  • Author
    Posts
  • in reply to: ausmicro vs bitpimps mod challenge idea! #37479
    Avatar photoBilboFOL
    Participant
    • Posts: 83
    Quote:
    bilbo, sorry, didn’t read ya post properly!:blush: but ya still a half pint!:p:8ball:

    I’m a Hobbit (or Halfling if you must), get it right:).
    No problems, I’ve been called worse.
    Just don’t call the Hobbits late for dinner, they get testy when not fed regularly.

    Logistically I would think teams should be based in one country or the other, that way cars aren’t being sent from Germany to USA to Australia for the teams to work on.

    in reply to: ausmicro vs bitpimps mod challenge idea! #37762
    Avatar photoBilboFOL
    Participant
    • Posts: 83
    Quote:
    yeah, i think an internal comp to decide the representatives is the way to go.

    Quote:
    Maybe have the USA and EU compete amongst themselves for a individual title.

    whassa matter half pint! doncha think we’re contenders down here!!:D

    Hmm. I guess you didn’t read it the way I meant it.

    The USA teams would compete against themselves to have one USA Representative (same for EU). I know y’all know how to mod, I’ve been beaten enough times in comps by residents of the land of OZ.

    in reply to: ausmicro vs bitpimps mod challenge idea! #37787
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Maybe the teams should be

    Austrilia & New Zealand
    Canada
    USA NE
    USA SE
    USA NW
    USA SW
    EU West
    EU East
    EU North
    EU South
    Central America (Mexico to Panama)
    South America
    Japan
    Asia
    Africa

    Maybe a freindly comp to decide who represents which area and then the winning teams from those areas then compete for the World Cup of Modding.

    Maybe have the USA and EU compete amongst themselves for a individual title.

    I think you should try and live in the area you represent (but not required)

    Maybe have the USA and EU compete amongst themselves for a individual title.

    Teams can call themselves whatever they wish but they represent a region.

    I wonder whom I could get to represent the Shire with me. 😀

    in reply to: ausmicro vs bitpimps mod challenge idea! #37811
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    For dual members how about the Aussies default to AusMicro and the Americans to BitPimps. Then the rest of the world choose who’s side they want to compete with.

    in reply to: “Show us Yer Bits” Competition Discussion #22827
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Any idea when the winners (and losers) will be announced?

    in reply to: Perfection #25406
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Toy East is based in Hong Kong, I’ve ordered twice from them and no problems.

    I’m guessing the parts are made in China. LXX may also be part of the Perfection group like I believe Mini Heart is.

    in reply to: “Show us Yer Bits” Competition Entries #39052
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Project: Happy Hauler
    Body: Nakamichi Racer Truck
    Chassis: Precious

    Modifications
    Body: Cut off rear cap and put on bed cover. Added Rails over bed. Hidden rear slot that lowered the rear. Cut front mount to lower front end. Dupilcolor Twilight Blue (Metallic) Paint.
    Chassis: Cat 5 Antenna

    Under Constuction
    Hauler2.jpg
    Hauler3.jpg

    Finished


    in reply to: TOMY fiasco?? #26267
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Probably because if they really sued someone they would lose big time. Tomy/Hobbico doesn’t like international Tomy cars in the US because it hurts their sales. If they would sell all the cars all over the world at the same time for the same price they wouldn’t have people undercutting them on eBay.

    in reply to: “Show us Yer Bits” Competition Entries #28358
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Project: Teed-Off
    Body: LXX RX-7
    Chassis: LXX
    Wheels & Tires: LXX Black



    in reply to: “Show us Yer Bits” Competition Entries #29237
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Project: Outback
    Body: Clone WRX
    Chassis: Tomy Booster

    I decided to make a WRX into a car that was using Aussie Actor Paul Hogan in their commercials in the USA.




    in reply to: “Show us Yer Bits” Competition Entries #28865
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Project: GT-W (Grocery Getter)
    Body: MS Skyline
    Chassis: MS
    Wheels and Tires: Nakamichi Racer.

    It takes a true Hobbit to make a car to get the food.



    GT-W-2.jpg
    GT-W-3.jpg
    GT-W-6.jpg

    in reply to: “Show us Yer Bits” Competition Entries #28863
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Project: Woody
    Chassis: ZZ SE
    Body: Custom Bit Bodies Woody




    Edited by – BilboFOL on 19 October 2003 00:30:08

    in reply to: “Show us Yer Bits” Competition Entries #39207
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Here’s the first Hobbit Entry.

    Project: Pony Express
    Body: Zip Zap Mustang, shortened to fit BCG and convertened to convertable.
    Chassis: Precious, Tab Lowered front and exhaust tip attached to chassis. Wheels Painted Gold to match paint scheme. Blue Cat5 antenna.




    The idea for shortening the body came from seeing CaboWabo’s Challenger.

    I lowered the body by Tab lowering the Chassis in the front and making a custom slot in the rear of the body for the tab.

    Side skirts and front air dam (of course).

    Driver is from Phast Motors, but I really had to chop it to fit.

    Of course I detailed the side mirrors and head and tail lights.

    I figured I needed to put up at least one entry from Philadelphia, PA USA.

    Hope you like it.

    in reply to: You’re all a pack of lazy bastards!!!! #32559
    Avatar photoBilboFOL
    Participant
    • Posts: 83
    Quote:
    C’mon people, where are your entries in the “Show us yer bits” competition?????

    So far the majority of poeple that have entered aren’t even regulars on the boards…….

    You know who you are, get off yer backsides and show us what you can do!

    :question:

    ph2t.

    Don’t you realize that entries for contest always start out slow then come in fast and furious just before the deadline.

    The reasoning is you don’t want to give away your ideas for somebody to borrow and possible do it better and beat you.

    Me I’m personally working on some new cars for this contest.

    in reply to: You re all a pack of lazy bastards!!!! #47313
    Avatar photoBilboFOL
    Participant
    • Posts: 83
    Quote:
    C mon people, where are your entries in the “Show us yer bits” competition?????

    So far the majority of poeple that have entered aren’t even regulars on the boards…….

    You know who you are, get off yer backsides and show us what you can do!

    :question:

    ph2t.

    Don’t you realize that entries for contest always start out slow then come in fast and furious just before the deadline.

    The reasoning is you don’t want to give away your ideas for somebody to borrow and possible do it better and beat you.

    Me I’m personally working on some new cars for this contest.

    in reply to: “Show us Yer Bits” Competition Discussion #33546
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Hello Crazy Dave.

    With Cabo, You and DarkTari entering the contest this little hobbit will have to work harder. And you know how Hobbits prefer eating to working.

    Yes it is Bilbo from BitPimps, TinyRC and RCmod.

    in reply to: “Show us Yer Bits” Competition Discussion #36145
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    OK, I’ll post a few.

    Car: S2000 GAV
    Chassis: Shen
    Body: Fit Racer S2000
    Mods: Body Slammed to the ground. Body Kit. Custom Motor intakes and Exhaust. Top cut to become Roll Bar. Custom rear wing. Chassis has spring Suspension and cut off the arm pivot points to get body to fit. (Yes it turns) Cat5 Antenna.

    rod2.jpg
    rod3.jpg
    rod5.jpg

    Next

    Car: Scamp
    Chassis: Tomy
    Body: Shen Gloria
    Mods: Chopped back of car to make it into a Nissan version of an El Camino. The name Scamp comes from Plymouth, that’s what they named a mini P/U based on the Horizon/Omni platform. Cat5 Antenna.

    s3.jpg
    s4.jpg

    Last for Today

    Car: GT-W
    Chassis: MS/Tomy
    Body: MS/Tomy Skyline R32
    Mods: Well I chapped the back off and made it into a wagon (or do they call it an Estate down there). Custom Exhaust tips. Cat 5 Antenna. Nakamichi Racer Rims.

    Skyline_GT-W.jpg
    GT-W-2.jpg
    GT-W-9.jpg
    GT-W-8.jpg

    in reply to: “Show us Yer Bits” Competition Discussion #35721
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Is it only for BCG’s and Clones or can ZipZaps be entered.

    When does it end?

    Edited by – BilboFOL on 01 September 2003 13:22:55

    in reply to: “Show us Yer Bits” Competition Discussion #36023
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    Is it only for BCG’s and Clones or can ZipZaps be entered.

    When does it end?

    Edited by – BilboFOL on 01 September 2003 13:22:55

    in reply to: Never!!! #22288
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    What’s wrong with Saturns? My wife has one. The original ones wouldn’t be bad for Bits.

    The Omni I’m assuming you mean the Dodge Omni/Plymouth Horizen. Only the Sport version would be good on Bits.

    Not never make a Dodge Aspen. Ford Fiesta, Any 80’s GM X cars. Yugo. AMC Matador.

    in reply to: New set of wheels on my Compact GTR #22152
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    How does the car drive with those wheels?
    Are the tires rubber?

    I’ve seen Modifiers in the US for under $12.00US, not sure of the conversion to AUS dollars. Haven’t picked one up yet, now I may have to if they drive well on the BCG.

    in reply to: Lxx frequency’s #23358
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    01 = 27 Mhz
    02 = 35 Mhz
    03 = 45 Mhz
    04 = 57 Mhz

    in reply to: Lxx frequency s #46349
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    01 = 27 Mhz
    02 = 35 Mhz
    03 = 45 Mhz
    04 = 57 Mhz

    in reply to: Whats people favourite BCG body for Racing #23147
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    NSX
    Beetle
    Skyline

    in reply to: Do char-g parts fit in LXX chassis? #23110
    Avatar photoBilboFOL
    Participant
    • Posts: 83

    The only problem Tomy part are the bodies. You have to trim the front tab on the LXX for the Tomy bodies to fit.

Viewing 25 posts - 26 through 50 (of 70 total)