henal
Forum Replies Created
-
AuthorPosts
-
was there a way for it to be cheaper like around 20 dollers or 37 is just the right price
hi
i just payed for it but he charged me 37 dollers to shit it to uk and the item weights about 3 pounds (1.3 kg) is that a right price or did i just get riped offfrom what i know he done up the gen1 years ago so i gess gpm must have been good at that time and as i will be using lipo which will stick on the sids so i gess it will be aright do drive and what jolly said that in the mini z awd the battery are all on one side and with a xmod you can just get rid of 4 wheel dirve if you dont want it
i was thinking of buying it and then maybe later on i can try get a mini z or iwaver or a miniz clone pcb i might be wrong but i heard that a full moded xmod(using a diffrent electronics) will be faster then a mini z because of the shape might be wrong tho
from what i heard that evos are shit because there are to fat and got lots of weight from them partes and u have to pay way lots of money to get them all gpm and g1 are much lighter or may be im wrong and evos are the best
any one else opinions on this i got him down to 80 pounds if that helps
omg.. wow that is small nice job man never thorth it woud be that small but can it handle like nelly turbo
it should be faster as there less winds in the motor
@betty.k 225420 wrote:
that’s some tidy work there man, but i’m dissapointed that it doesn’t come in black heatshrink with a red stripe!:rolleyes: :8ball:
yea im with betty with this it would be cooler with some red heatshrink with black strips or the other way around instage of just the green
i dint even see them lipo there at 47 mm thats good for a 10 c battery but postage to uk is not worth it
this is lion right do there get hot because when i was tring to pull out about 3.80 and there got warm but not hot im am using the cr123 batterys
hi just want to know people running lion batterys how much current can they handle
i got a 1000 mAh and i think the disgarge rate for lion are ruffly about 1.5 to 2c (about 1500 mA -2000 mA) but can they handle about 4 ampsthe battery gets warm from the first 30 sec but not hot
thanks
if im right from the site a mr02 rm motor mount will work on a mr01
mybe over there here are around ?8.50 for the first alloy gear on ebay
@betty.k 225260 wrote:
i had an 01 and gave up on it after breaking at least 10 sets of servo gears. i also managed to destroy a full set of alloy gears too!
i now have an 02 and i believe it’s the best of the mini z’s. low center of gravity, brake and most importantly a servo saver. i haven’t broken a servo gear since.
but to your original question if i had to choose between an 01 or 015 i’d choose the 015 :8ball:
dam thats alot of servo gears i can no way arfored to pay for all them shall i get the car and then sell it back on ebay and wait for a mr o2 to come out or shall i just keep it cause it does have a couple of parts which might be good to keep the mini z for
and as rcs2die4 said that it handles the best compair to the other onesis brake realy nessary because i have a xmod g1 and i got to say that the brake is rubbish
also it the sorvo gears nice and strong and will it last me long is i just dont crash also i got my mini z from ebay for £30.50p (around 60 to 70 $) is it worth it
also how is the speed and the handling of the mr01 compair to the other ones
thanks just what i was looking for took me a long time for looking for this but never found it so i had to post
oh i get it now tanks so for the ppl who got the mini z or what ever there calls there got to replace them because the stock one are cheap and there dont pass much current
hay do any of youlot know what mods i can do to my race tin (electronics side) not the one listed above
and how may tunes on the motor do u think is best im going to try 50 turns with no load as i dont have my race tin and i will be getting them in about 1 weeks time
http://cgi.ebay.co.uk/2-Race-Tin-RC-Cars-Blue-And-White-BNIP-NR_W0QQitemZ330064382228QQihZ014QQcategoryZ2565QQssPageNameZWDVWQQrdZ1QQcmdZViewItemsee now thats what im confused at when there replace the mosfet in the mini z there get some mad speed but race tins dont have mosfets im confused
so me using mosfet is the same as me using relays in the race tin
are there any other ways electronics side for me making it fasted
i know all about relays turbo adding more cells winding motorsany help for for me making the race tin reach insane speeds(electronics side)
as it is hard getting all the gears over here(london) with out paaying a big price over here
will be getting my race tin in about 1 weeks time so i want to have ever thing to mod it
-
AuthorPosts