jevries

[jevries]

Thanx man! Right now my cars are on display at the Ben Maltz gallery in L.A. and I was stupid enough not to shoot any footage of the micro big body….I will get it back within a month or 2 and make sure I shoot a nice video or you guys!:smiley14:

[jevries]

Well, finally I finished my 1/64 RC micro ’96 Fleetwood….it lifts the rear smoothly, hops the front and steers and drives. It was a heck of a job and I’m prolly not gonna build another one…hehehe.

[jevries]

Really cool job you did on that Rc car and even cooler you made a small videoclip!! I’m really into the lowrider theme it’s lot’s of fun!You can check it out if you want to at:
http://www.jevries.com

I forgot to mention that the small car section is still under construction but I hope to open it up pretty soon!

Edited by – jevries on 04 March 2005 05:41:21

[jevries]

I truly believe it should be possible to use the Turbo function on the RX6c chip for other usage.
It’s just a pin probably leading to a transistor that gives the motor the 100% juice it needs.
There must be a workaround to directly give the motor the 100% juice using the standard forward button.
I will try to find out where pin14 (turbo function) leads to but perhaps someone on here already knows the trick.:)

[jevries]

I truly believe it should be possible to use the Turbo function on the RX6c chip for other usage.
It’s just a pin probably leading to a transistor that gives the motor the 100% juice it needs.
There must be a workaround to directly give the motor the 100% juice using the standard forward button.
I will try to find out where pin14 (turbo function) leads to but perhaps someone on here already knows the trick.:)

[jevries]

I marked the pins that are not connected red.
PCB controler:

PCB car

Edited by – jevries on 24 November 2004 01:07:05

[jevries]

I know, I know, it takes some imagination and creativity to think of what to do with more (extra) channels.:D

[jevries]

I know, I know, it takes some imagination and creativity to think of what to do with more (extra) channels.:D

[jevries]

I’m still wanting to know if it’s indeed possible to use the Turbo pin on the car to fire up someting else?
people told me that the 50% powercut is done internaly in other words inside the RX6C chip…but why is there an output pin?
It is a signal that is transmitted and picked up by the car changin it’s behaviour.
I hope someone can shed a light on this.

Thanx!

[jevries]

Thats the trick works like a charm!

[jevries]

Okido! Thanx I’m gonna work on it!

[jevries]

When I want to use the F1 and F2 channel to hook up two more motors would I need, besides the 2mosfets, also 2 resistors?

[jevries]

I bought an LXX perfection and the range on the 27Mhz was 1 meter….I removed the body and with a small screwdriver I adjust the small wheel inside that tower thing thats soldered onto the PCB worked like a charm.

I layed something heavy on the forward button of the transmitter or you can clamp it down, sticking a match between the button and the housing, so the motor will spin and you can walk backwards adjusting the range.

[jevries]

I think I’m gonna check the BCG for sale section….:D

[jevries]

I think it’s about time you get some buisness going’..hehehe:D

[jevries]

Now I mosdef wanna see a DUPLO diagram or pic of this Mosfet turbo trick!!!:D

By the way, great website you’ve got there Betty. K.!

Edited by – jevries on 17 April 2004 23:43:31

[jevries]

Yo Donor, That’s some crazy shit man! And thanx for welcoming me to the board, I’m fairly new to all this modding and stuff and that’s why I asked for a pic on how to wire the FETS as you did on your small external turbo board leading to the Bit PCB.
I’m like a DUPLO guy you see, I can follow colored wires from the one spot to another…hehehe so when I see what wire goes where to I can do the job too.:D I think I’m not the only one..
Thanx man!:)

[jevries]

Looks like a killer performance! I wanna do this mod. Can you please make a bigger pic or small diagram on how to exactly hook these mosfets to the PCB? It will save a lot of time answering all kinds of questions…:D
Thanx!:)

[jevries]

Okay, I bought 2 LXX perfection cars…supercool cars by the way altho I had to adjust the pot meter a bit but let me go on…there are 2 buttons on top of the controler:

1- Turbo
2- No idea

These 2 extra channels your talking about is this without the turbo feature included?
I don’t really know how the Turbo feature works altho I understand that in normal mode the motor receives 50% of the battery’ capacity and when the turbo is pressed it gets the full 100%. So this gives me an idea that the turbo feature is also an extra channel.

So lets say I put the switch on the back of the controler in the Turbo mode and I use the Turbo channel as an extra channel this would give the car an extra channel right?:

left
right
backwards
forwards
1 extra channel on pin 9
1 extra channel on pin 15
Turbo pin 6 which I also want to change

My question is: can you use the Turbo feature for another purpose?:)

[Author]

Posts