peteWah

Forum Replies Created

Viewing 25 posts - 176 through 200 (of 998 total)
  • Author
    Posts
  • in reply to: Sunday Races……..Sydney GTG!!!! #19347
    peteWah
    Participant
    • Posts: 1020

    LongJohn Hint Hint…Please I want to know, It hurts, it Burns

    What is it :smiley2::huh:

    in reply to: Sunday Races……..Sydney GTG!!!! #19363
    peteWah
    Participant
    • Posts: 1020

    LJRC has nothing to do with Lisa or Jackson dose it mate

    in reply to: rcp mini-96 track anyone ? #19362
    peteWah
    Participant
    • Posts: 1020

    You could throw some kind of obsticle into a oval you have to start somewhere like you said :smiley2:

    Edited by – peteWah on 22 July 2005 12:07:27

    in reply to: rcp mini-96 track anyone ? #19361
    peteWah
    Participant
    • Posts: 1020

    I want black, red and yes you said it Kev, Green….

    The tiles are waterproof And the black tiles i reckon would absorb the heat well allowing for a better racing experience with foam and/or rubber tires :smiley2:

    What do you all think :smiley2:

    in reply to: rcp mini-96 track anyone ? #19358
    peteWah
    Participant
    • Posts: 1020

    NO,
    The colours they come in are on the prev page mate,
    They are the same colour all the way through…

    :smiley2:

    in reply to: rcp mini-96 track anyone ? #19382
    peteWah
    Participant
    • Posts: 1020

    The are 60cmx60cm or 600mm square, 1cm thick and they come in multiple colours Red, Blue, Green, Yellow and dare i say terracotta…….Yuk

    I rang and spoke to the guy (Jamie) at the Haberfield CR store and he gave me all the info in the post above that Dave typed…

    Supose we rang other suppliers of foam/rubber with that info and tried to get a better offer…

    Could we do better is my Question :huh:

    in reply to: THUNDERDROME 2005 is on again! (Melbourne) #59682
    peteWah
    Participant
    • Posts: 1020

    Correct,
    The Limpix 1
    I would like to get a fast mini-z on there with foams
    or a low degree rubber tyre…

    Maybe the sylicone trick that panda was talking about would be worth a go with foams
    (still not sure how that works but hay)
    But i still dont like are chances of getting in ther with R/C :smiley2:

    A mate of ours up here has a Pro4 with a Brushless motor and esc to handle + a double stick pack battery setup and im not sure what else,
    It Flys >Almost.
    Lets just say you would need a runway to open the beast right up… Its a Nitro KILLER. :p:smiley2:

    Edited by – peteWah on 21 July 2005 10:15:52

    in reply to: rcp mini-96 track anyone ? #19373
    peteWah
    Participant
    • Posts: 1020

    I know i could set a whole track up in my back driveway area
    and Dave could set up 3 or so in his dump of a back yard…

    And we wouldn’t have to go to Meadowbank all the time…:smiley2:

    in reply to: rcp mini-96 track anyone ? #19372
    peteWah
    Participant
    • Posts: 1020

    I’m Going to give them a call buy the end of this week
    to talk about quantity and price and stuff.
    The inquiry would be for the lot of us, If we all want a track that is…:smiley2:

    in reply to: THUNDERDROME 2005 is on again! (Melbourne) #59680
    peteWah
    Participant
    • Posts: 1020

    I saw some vids of 1 of the meet ups down there and i say WOW, If i was in VIC i would come to watch…

    Thats a Cycling Track is it not…:huh:
    If so i would like to try it some time on the indoor short track 1 in Sydney, But i don’t like our CHANCES :smiley2:

    in reply to: Sunday Races……..Sydney GTG!!!! #19371
    peteWah
    Participant
    • Posts: 1020

    Happy Birthday to Jackson then… Are you going to have a party :huh:

    in reply to: Sunday Races……..Sydney GTG!!!! #19393
    peteWah
    Participant
    • Posts: 1020

    Just sorry would be nice, You sound like my Mother…

    in reply to: Firelap: 4.0 and F1 Bodies land at ausmicro.com #19391
    peteWah
    Participant
    • Posts: 1020

    I like the look of the Silver 1 :smiley2: Cheap MM shell here we go…..
    Might destroy 1 of these before Killing my enzo…:smiley2:

    Edited by – peteWah on 19 July 2005 18:21:47

    in reply to: Sunday Races……..Sydney GTG!!!! #19401
    peteWah
    Participant
    • Posts: 1020

    Now im just pissed with YOU because you cant see where you wronged me.

    in reply to: Sunday Races……..Sydney GTG!!!! #19412
    peteWah
    Participant
    • Posts: 1020

    FaQue:smiley2: And FaQue Too :dead:

    Its all your Fault :huh:

    Q. So who’s not going racing this SUNDAY…..

    A. Me if i get asked to work….

    <<>> :D:smiley2:

    in reply to: rcp mini-96 track anyone ? #19414
    peteWah
    Participant
    • Posts: 1020

    what if we were spending enough to have 1 complete track each From the how to…

    Then we could all go or ring to make a bigger/Mega order…

    I want a whole track that i can fit in a sports bag so i don’t have to rely on others Showing up or what not or somebody has the other halve of the track and is doing a no show or has other things to do and so on…. *laugths*
    This i am sure you don’t want to happen and neither do i…

    Verdict = I want a whole track :smiley2:

    in reply to: Sunday Races……..Sydney GTG!!!! #19411
    peteWah
    Participant
    • Posts: 1020

    quote:


    I had to?work yesterday for 7 hours, and I do not get paid for it.

    Mini-g what bargains did you find ?


    Not payed thats your fault Kev and i wouldn’t

    I could have done 7 hours of work payed

    The weekend before last/Not just gone i got payed for 10 hours work.

    So can 1 understand…..O N

    Also, Go and have a look at the end of page 46 To current and it would also suggest that Racing was happening and that my chassis was coming back, SO with the exception of Kevsta who was working, Racing did sound highly likely….

    Can we be a bit clearer Next Time THANKS :smiley2:

    in reply to: Sunday Races……..Sydney GTG!!!! #19417
    peteWah
    Participant
    • Posts: 1020

    quote:


    Pete; you are able to think for yourself, yeah? Your decision to work (or not) is yours and yours alone,?please dont blame others. We did’nt?force you not to work?so what you did with your day is up to you. Dont be ?at us…


    You wouldn’t Know Dave,
    As you were Pissed as hell with you sister and company and cant recall the night…
    But it was you who told me not to work before promptly kicking Mark and myself out,
    Justin called me on Marks Phone 5 mins later after he had got back from dinner and i told him i was going racing because thats what i was told…..
    We did not go racing like all 3 of us had been talking about so what up with that,

    I feel I am allowed to complain about this…..

    Now i will take the chill pill.

    Don’t fuck with my time is all i ask, I cant be any clearer :smiley2:

    in reply to: Announcing: Spider – External FET board #19425
    peteWah
    Participant
    • Posts: 1020

    It looks the part mate…

    Good Job.

    in reply to: Sunday Races……..Sydney GTG!!!! #19427
    peteWah
    Participant
    • Posts: 1020

    Im pissed that we did not run sunday just gone,

    If i was Aaron i would be pissed
    Aaron worked on my racer to be back for racing on the Sunday…

    The reason being is that i could of worked and declined because i said i was racing…

    Thanks to those who i made plans with and stuffed with my time when i could of been earning good money…

    Thanks Dave’s

    in reply to: i got me an overland! #19445
    peteWah
    Participant
    • Posts: 1020

    No, im sure without even asking that it was your sister…

    in reply to: i got me an overland! #19448
    peteWah
    Participant
    • Posts: 1020

    It was your sister was it not…

    in reply to: rcp mini-96 track anyone ? #19447
    peteWah
    Participant
    • Posts: 1020

    Stuff that idear then…

    in reply to: New to Mini-Z’s… #19476
    peteWah
    Participant
    • Posts: 1020

    Greetings Friend.

    Jay-Z might have a couple of 01 mini-z racers for sale, But you might have hassles trying to raising him…

    Might see him later tonight if not he will be brought up to speed ASAP as he has said on many a time that he wanted to get rid of a couple…
    I will get him to put prices up here… :smiley2:

    Again welcome to the forums and hope you have fun with the scale… :huh:

    in reply to: rcp mini-96 track anyone ? #19475
    peteWah
    Participant
    • Posts: 1020

    Drinking beer and talking about foam… LOLRHard
    MMMMM beer foam :smiley2:

Viewing 25 posts - 176 through 200 (of 998 total)