Admin

[Admin]

they go by color. red green and yellow are the cheepest white and blue are the most exp. look um up at http://www.radioshack.com and theres 3mm leds put out by street glow for havic lighting for real car’s in every neon. and lemme guess you dont think there bi colored led’s either?

[Admin]

Yes you can kill batt by overheating them, the most often causeis the cells/plastic inside the bat melt form over heating the terminals.

check your battery like what lancer said

I found a cheap source of part like moter spair batt, rear axia so from a new toy ( well new in australia anyway) by Hotrod(or is it matchbox) sorry can’t remember, but is a slot racer car that uses the same stuff as the bits, but don’t have any stearing cos it runs on a track… oh its a good source of spair wheels too

[Admin]

I saw little tools and stuff..pitty i can’t read much japanese.
I am gonna buy a bus and a sub and all the cool things.
Lots of space for mods in the bus!

[Admin]

i want a good fast n stable car

wat do u guys suggest i buy?

i live in australia and dun want to important ne fing

thanx =)

[Admin]

Lacer is just pulling his chain again.

[Admin]

Which means your original post is untrue anyway. You stated

“i orderd my bentley bit today” you let your whole country down with your attitude. I pity any other Americans on this forum.

[Admin]

There’s a lot of info in this thread so I haven’t read it all but I can tell you if you’re in Oz DO NOT buy a HPI car. The support here by Bolt-On is poor at best. I’ve even had them try and sell me used parts as new.

Don’t get me wrong I like HPI cars (I’ve owned 2 and still have 1 of those) but unless you’re willing to buy parts from OS like I do Tamiya is a much better choice.

[Admin]

um the body is a slot car body and you can order them from http://www.towerhobbies.com dumb ass im looking at it right now $4.99 .30 lexan remember america has diff. sh*t than australia and japan beaing since 3/4 of the aftermarket r/c companys and slot car companys are in america. and as far as custom made i got that camaro on my tv hmm i might rip the body off anf cut some mounthing slots. they sell the car at toys r us there hot rod somthing die cast. there not all hand made ony a few cars were the rest are slot car bodys and small die cast bodys.

[Admin]

I’ve been having a look at their site. They have some AWESOME custom cars. But they don’t sell them. In fact they even have a RAQ (Rarely Asked Questions) and it states….

Q. Where can we buy the cars on BCGP?
A. Our cars except which from TOMY are made by our members originally. Therefore there is no way to buy them.

So stop dreaming, and if you want cars this cool, make them yourself like they did.

The original pages are here…

http://www.diana.dti.ne.jp/~kodama/bcgp01.html

I’ve actually emailed them to ask if I can mirror some of those images in my gallery.. they are really cool and should help give ideas and inspire people.

[Admin]

how about a lamber. them are bad ass cars and would be a nice bit.

i made a beater with my s2k bodyi took my solder iron to it and make it look alldented up and and painted the bumper a dif. color its my hooptie i use the zip zap wheels so i can have 3 hubcaps on it ta make it look ghetto. anyone else ghetto out a body? like rust spots bondo cracked windows ect.?

[Admin]

i got a nicely set up microsizer aka american bit. and a hoped up micro rs4 full titanum chassy http://www.geocities.com/superbadasssweetdaddyneil/index.html

theres a pic of the micro

[Admin]

Tx

[Admin]

if the + and the – on a batt get connected or if they toush any way they ould short out tryto see if you get any reading with a d.v.m. digital voltige meater

[Admin]

im lookin for a booster bit becouse race on a track with allmost no st8 aways so whare at in the usa do you live.

[Admin]

they still kick ass i remember the old school tyko 1’s that kicked ass

[Admin]

see, i ordered an auto modellista set and i just found out all this crap about the boost only is 1/2 speed. Im tryin to figure out what to do.

[Admin]

how could i have shorted out a battery? could it be from the solder? maybe over heating it from trying to solder on to it??? cause it got fair hot.

[Admin]

no thats gay. i got a 3 skylines white black and silver a cel red a lancer evo 5 a silver supra. i only got 3 bit’s but a sh*t load of bodys. but i got me some epoxy puddy and im gonna try ta make a 93 mustang hatch. and if it works im gonna do the gtit will take a while but it looks easy

[Admin]

i did that evo, i copied qfm.

[Admin]

i know what it is i ordered it but it is a real bently body. im tryin ta see if anyone makes a x5 that will fit or a turbo coupe

[Admin]

no did nothing, exactly the same

[Admin]

cover the neg. side on the batt. in the car and solder a wire to the side of the batt. then take that wire and hook it to the ide of the 2nd batt. then take the – side of the 2nd batt and solder it to the – batt. turmnal inside the car

[Admin]

I doubt it… IMHO it’s just a regular DansAM Lexan bodie, which is painted like a bently… plus http://www.diana.dti.ne.jp/~kodama/image

check out this page for more BCGS, you will find them when you will see that ur bently link is clicked… lol… they start in CAPITAL letters….

[Admin]

ok cool good idea.

[Admin]

a 9 volt, do u have the auto modellista set.

[Author]

Posts