cagefreak

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • April 22, 2007 at 7:06 pm in reply to: How to run in new electric motor?? #60473
    cagefreak
    Participant
    • Posts: 11

    @klims 225555 wrote:

    do any of you guys add com drops while running in?

    during break in? no

    but after it’s all cleaned up i put accouple in there for its debut run.

    April 21, 2007 at 9:06 am in reply to: How to run in new electric motor?? #60451
    cagefreak
    Participant
    • Posts: 11

    i actually swear by “soaking”. My method has accouple of things that are different. I actually throw an ice cube in with the water for keeping the magnets super cool. Also I place an old pinion on the motor so that the water is actually moving to help pull away the debris from the brushes and commutator. Finally, I pull the whole thing out and spray it down with electric motor cleaner. It helps make the water evaporate out of the motor.

    April 21, 2007 at 8:45 am in reply to: Spider v3.0 "Red Back" – Ready to Bite! #60450
    cagefreak
    Participant
    • Posts: 11

    quick question, how many amps can the spider handle?

    April 11, 2007 at 6:25 am in reply to: AWD Gearing #60277
    cagefreak
    Participant
    • Posts: 11

    depends on how fast the track is…. but I’ve found a good all around ratio is 19/27 or 20/27 if you have the pro kit from pn racing.

    April 11, 2007 at 6:22 am in reply to: Spider v3.0 Preview! #60276
    cagefreak
    Participant
    • Posts: 11

    easter has come and gone hehehe

    April 4, 2007 at 5:48 am in reply to: Spider v3.0 Preview! #60142
    cagefreak
    Participant
    • Posts: 11

    lol, I really can’t tell since I’m not familiar with your currency. If that coin is anything like an american quarter then that’s damn small. Great job.

    <

    is getting overly excited.

    April 3, 2007 at 5:57 am in reply to: my ‘blue label’ turbo #60124
    cagefreak
    Participant
    • Posts: 11

    sweet!! who cares what it looks like, like you said “in first stages of development”
    can’t wait to see it in an 02

    April 3, 2007 at 5:54 am in reply to: Announcing: Spider v2.0 "EensyWeensy" #60123
    cagefreak
    Participant
    • Posts: 11

    still no word on release date?

    March 26, 2007 at 4:12 pm in reply to: Announcing: Spider v2.0 "EensyWeensy" #60084
    cagefreak
    Participant
    • Posts: 11

    @Aaron 225192 wrote:

    cagefreak, We basically ran out of stock of the v2.1s…

    The v3.0 shoudl be here next week.

    GREAT!!! Can’t wait to pick one up.

    March 21, 2007 at 5:27 am in reply to: Announcing: Spider v2.0 "EensyWeensy" #60069
    cagefreak
    Participant
    • Posts: 11

    @klims 225181 wrote:

    cagefreak there don’t seem to be any available at the ausmicro shop atm. Aaron did mention that he only had a few left. looks like we are gonna have to wait for the ver 3.0

    Aaron, if the v3 will electronically be the same as the v2.1 is there any reason why you don’t solder the motor and power wires directly to the FETs? i noticed an increase in performance as soon as i did this, and i guess there would be less chance of blowing a track.

    Thanks for the heads up klims.

    March 17, 2007 at 6:04 am in reply to: Announcing: Spider v2.0 "EensyWeensy" #60060
    cagefreak
    Participant
    • Posts: 11

    ver 3.0 sounds well and good, but where’s a person from the USA supposed to purchase your magnificent product. I can’t even find the spider 2.1.

    <---- help me please

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)