ken_wyleung

[ken_wyleung]

Quote:

(Out of Topic)
But stock! but what happens to all those x-speed, SO3 and Plasma of ours?

To prevent speeding through barrier edge i guess the only way is to not speed or go full throtle around corners~

As I know the Kyosho Mini-Z Cup in Japan is using X-Speed and Stock car. optional FET, Toubo and Other motor are not allowed.
😀

[ken_wyleung]

Sorry All, and Thank you guy,

I check the information from Kyosho Web-site. The correct tyre size is 25?8.5mm for front/normal 25×9.5mm for semi-wide and 25x11mm for wide tyre. Please keep update me if it is in-correct.

Thank you.:D

Edited by – ken_wyleung on 25 May 2004 16:54:42

[ken_wyleung]

Quote:

wow! ken! you know your stuff, thanks for that! helps me out as well!

ph2t.

You are Welcome. If it has something in-correct, please update me!

Thank you.
😀

[ken_wyleung]

Normal – is 8 mm wide and rounded tyre, which is for all Mini-Z front wheel, and some normal Mini-Z rear wheel. Such as ECHO, Viper, Subaru, RX7, Lancer, Porsch, Beetle, Focuse, AE86, S2000, BMW Z8, etc.

Normal Flat – is same as Normal but FLAT.

Semi Wide – is 9mm wide tyre, which is design for optional wheel, Kyosho wheel parts: MZH8/8S,MZH6/6AM,MZH3, etc.
Those wheels are design for the normal wheel base car as rear wheel to make it wider than normal.

Semi Flat – is same as Semi Wide but FLAT

Wide – is 1cm wide tyre, which is for wide wheel base Mini-Z, such as Benz, Supra, NSX, Diablo VT, Skyline GT-R, F40, F50, F355, F360, Prosch GT3R, Corvette, LANCIA’78, ENZO, F575, 350Z, Melean F1GT, etc..

😀

Quote:

I was browsing through rcmart.com when i came across different types of tyres.

Normal
Normal Fiat
Semi Wide
Semi Fiat
Wide

What the different between them?

Anyone what type of tyres do a Mr-o1 NSX 2002 use?
Is wide but i’m not sure if they are semi wide or wide

Cheers:D

[ken_wyleung]

Quote:

any word on an overlander clone perhaps monster, i know im pushing my luck but hey you can always ask!

if these new iwavers are like the last ones then they should be good.

i wonder if these new mr02’s clones have the brake function? hmmmmmmmm

I think it is chassis only.:D

[ken_wyleung]

Quote:

Yeah that’s good. Will the V2s have a new range of bodies?

As I know, the chassis will be MR-02 chassis. It still not idea about the body and motor mount (RM or MM).:D

[ken_wyleung]

I am going to order 350Z body, it release in Japan within this 2 weeks.

[ken_wyleung]

Quote:

Quote:

who cares really if you break a sero gear there cheap!

i got one and i am surprised at the quailty of it. for some reason its quicker then my real Z with the same set up (9th pinon gear and ball bearings!)

but an x-mod looks the business, with a bodykit, and 4wd is good for drifting, still considering getting one to thrash about!

You are the lucky one!:D And I am not:shock:

So, can you tell me where can I order the servo gear for iWaver please?:)

[ken_wyleung]

Quote:

who cares really if you break a sero gear there cheap!

i got one and i am surprised at the quailty of it. for some reason its quicker then my real Z with the same set up (9th pinon gear and ball bearings!)

but an x-mod looks the business, with a bodykit, and 4wd is good for drifting, still considering getting one to thrash about!

You are the lucky one!:D And I am not:shock:

[ken_wyleung]

Quote:

get an iwaver from toyeast. they are better than xmods and cheaper. xmods have too many mechanical flaws.

But the iWaver may finish after your break the servo gear!:D

[ken_wyleung]

Quote:

Do you mean the black box? Well some guy did the same thing, try reading the link; it might help

http://www.minizracer.com/forums/showthread.php?t=13624

Good luck

Yes, I like this one:
“5. This is why the fet installation costs so much! and should be done by some one who has done it many times…”
:smiley2:

[ken_wyleung]

Quote:

hmm ive got the xspeed in it now ,,aaron says that a 2×2 stack would be fine for a xspeed ,,also looks like to due to the hight restriction cause i dont want to stack them 2 high just yet and cut out the body,, later on i guess ill put something befier in it ,,did you have to mod your f1 shell to get the Fets to fit??how many did you put in the F1?? any pics ??

I have not cut my F-1 body, I was put 3×2 G2 FET on it, it also fine. But I remove them, and just 1×2 FET now, and it is very fast too. It is upto 36km/h now. Because I think higher speed may not make me have a better lap time, and the best lap time may not make me to win the race. Most inportant thing is control, car and driver.:D

[ken_wyleung]

Quote:

looks like i could do a stack of 3 x 2 without cutting the body out ,, pictures here have a 6 x 2 stack with the Fets coming out of the shell ,,hmm i dont want to cut that nice pretty body ,,, look here any ideas ??
http://mini-zracer.com/gallery/fet

Edited by – aussiedanny on 17 May 2004 13:11:27

What motor are you going to use for your F1?:)

[ken_wyleung]

Quote:

OMG! OMG!! OMG!!! Finally, a 350Z!!! Yeessss… Have seen that yellow Lancer before, it’s been about for a month or so now. A pink S2000? Anyone got a girlfriend they want to get into Z’s?? LOL… Dont mind the blue striped GTR, looks too similar to mine though. Anyone know anything ’bout these 350Z shells? They better not be high mount… and DAMN!! that chrome Enzo is tasty… yeah, that M3 looks ok too

The 350Z is MR-02 RM, so you can use it on MR-01 too.:D

[ken_wyleung]

Quote:

Hmm whats the G2?? easy to put in ??any problems?? everything still work as it should??

It is the FET from HK Mini-Z track, it is same as other FET.
This is the support of the FET:
2×1 – all no request motor
2×2 – all no request motor
2×3 – toubo request motor
2×4 – All motor

most of my Mini-Z using it.:D

[ken_wyleung]

Quote:

how many people attend these meets?

this track looks cool:

is it this track at the ringwood meets?

cheers,

ph2t.

Edited by – ph2t on 16 May 2004 23:28:10

It is around 3 to 4 people play at Saturday. And it can up to 6 -7 cars in one race.
Yes, this size in Ringwood and it is good for 1:28 RC:smiley16:

Edited by – ken_wyleung on 17 May 2004 11:46:49

[ken_wyleung]

What motor you have, because some for the motor do not need run-in, some of them need 150 min runit time.

[ken_wyleung]

Quote:

how many race at ringwood? what’s the track setup?

We do race on every Saturday afternoon, and we have Stock class, Open class and F-1 class. Every class have 3 races per week and 8 weeks per season. It is welcome to everyone joy.:D

Our track is not big, which is in a single garage, on the carpet with the lap system. If you like to have a look the photo, please go to http://au.geocities.com/mrcz_miniz/

Thank you.:D

[ken_wyleung]

Quote:

Hi all first post for me after having my miniz F1 sitting on a shelf for the last year, its time to do a Fet install ,ive got a x-speed in it ,,copple of questions for ya
how many Fets can i stack under the plastic shell of my Merc F1?
do i have to remove the black box thing to get them in?
im looking at those IRF7389 or the paired IRF4905 IRL3705 witch aaron is selling ,,witch is the easyer install?? i dont mind soldering and have all equip to do so ,,
any other info is apprecited
thanks in advance

By the way, what motor you going to put on F-1?:D
If you can not get your FET, you may try G2, it also very good.:smiley2:

[ken_wyleung]

Quote:

mmm…like what panda said, i thought MiniZ’s reciever is only in 27mhz form?
And yes we got quite a few people playing MiniZs and I know the moorabin miniZ track. As for the new track, that’s pretty good consider it’s in a garage. in bullen it’s not that far for most of us.
But how far is it from TFRT? Can u post the track’s address(oops, it’s ur address too)? Or u can just PM me the address and time that we can actully play cars there. Thanks

Edited by – leonli17 on 16 May 2004 01:41:49

The new location is Ringwood..:smiley2:
And we race every Saturday afternoon.:smiley16:

[ken_wyleung]

Quote:

Hi Ken havent got the Fets yet,,can you confirm something for me with your F1 ?i have another Question about the 2 front Fets that have the red and black wires soldered to them ,, the chip that has the black wires has the black wires going across 3 pins ,,,the chip that has the Red wire looks like they go across three pins but i carnt tell ,,looks like a bad Kyosho soldering job ,,the car still works like this but i want to know if this is what it should look like,should the Red wire go across the 3 pins or just to one or 2 ,, heres a pic

Edited by – aussiedanny on 16 May 2004 22:08:56

It is not a matter, for that two fets, which are for the servo motor, you can connect it with any one or two or three or all pin, it still working.:smiley2:

Edited by – ken_wyleung on 16 May 2004 22:43:41

[ken_wyleung]

I am so sorry.

[ken_wyleung]

Quote:

I love the 2Fast2Furious bodies especially the Evo and the Yuki’s s200!

Are they compatiable with Mr-01 chasis? Or is it MR-02 only?

They are for MR-01.:D
But I am more interest about the M3

[ken_wyleung]

Quote:

if the rear ones are the thing ,then maybe i can cut 2/3rds of the antenna mount off and move the antenna mounting screw over that way that black bar wont be in the way ,,then i could stack the Fets as high as the mount was ,,is the mount used to stablise the car in any way as a chassis brace??or is it used to just hold the antenna? thanks for the offer Ken ill give ya a bell if i need to !!

That is OK, call me when you need, and I hope we can play F1 together.:D
By the way, where do you get your FET, and how much you pay for them.:smiley16:

[ken_wyleung]

If you want to power up your F1, you may have to remove the Rear FETs which is direct under the antenna, I know it is not much room, but it is not too hard to remove, if you use cuter to cut the legs, but that’s mean your 3004 FET gone. But it also the safe way to remove FET. Also, it not just for F-1 PCB, it is for all Kyosho Mini-Z. If you are in Melbourne, we may do together. Call me 0433171728.

[Author]

Posts