ken_wyleung
Forum Replies Created
-
AuthorPosts
-
I can not create a new one, so I use this.
Check this http://dordorhobby.com/eshop/index.php
body kits for Mini-Z, very nice…!Can modelcarmonster tell us more about the track please?
And I think it is a good place to connect Melbourne’s players for big fun too….
Thank you BOSS!
it is a very nice track for Mini-RC in Melbourne. Its takes the Mini-RC player into RACER!:smiley14:
I can see the lap system, cafe and heater, it is not only a track, it is a CLUB HOUSE!
Here is some nice photo…..
Don’t miss it…!757 Station St, Box Hill
Pinions in metal
spurs in plastic
for AWD pinions gear in metal can be work as motor heat sink and it can lock hard too.
Spurs gear can be upto you, but I will said plastic is better, it will less noice and long lasting too.yes, it is only for “forward”, it is the track-keeper recommanded.
So, I cannot run “backward” for long distance or long time with FET upgrade request motor.Cheers..
For the ICS cable, it can be order on KO-PROPO USA e-shop.
http://www.shopatron.com/product/part_number=61018/166.0And that is the way of stocking FET on my 2.4GHz. It was installed by Mini-Z Club Track in Hong Kong:smiley16:
It was exist….
We setup the track for business, and copied from Hong Kong; but as you said most Aus like 1:10 and start up cost is higher than 1:10. Finially we close the track.
http://au.geocities.com/mrcz_miniz/
enjoy…..its looking good!
I am running 2.4GHz on my AWD and MR-02 with 2.4GHz module, they are very nice. After connected with ICS cable, they are much better.
The software can be download from Kyosho web-site.Enjoy…
It is a good timing to get yourself a Mini-Z from Japan, and it is a nice kit!
Atomic AWD Parts Updated
http://www.egrracing.com/mart/index.php?cPath=21_101News Updated!
Kyosho may released the AWD ball diff on August…….:huh:News Updated!
The Kyosho Ball Diff MDW018 will be released on July 30 in Japan by 4410yen.
they are 90mm bodies, so just fit with MR01 or MR015 only.
Check with the last photo at right hand side and your Mini-Z manual
http://www.kyosho.co.jp/web/products/car_bike/miniz/minizoverland/overland_series/overland-e.html
This part is inside of your Overlander ready set, design for lock the diff.
🙂Overlander is not good for high speed race and jump.
Beware, it is very easy to break.
Good Luck!Good idea for user of Atomic Ball Diff for AWD:
We are using the TAMIYA 620 (AO-5016) Ball Thrust Bearing (for 1:10) replace the Atomic bearing, it is much better than the Atomic bearing for Ball Diff, also cheaper.
I am fine, thank you.
Most of the parts from Atomic and 3racing and they are not bad.
Hi all,
They are my latest AWD project
Some of the PM handwound 35t are OEM by M’z handwound, they are very good. Other PM motor are not very good. If you are looking for a very good motor for your FET car, M’z motor is very good. If you looking for fine motor, Atomic also is a good idea.
Kyosho ball diff may be released on June:smiley14:
Do you have think about upgrade parts and repair parts?
Which upgrade parts you want?
Which repair parts you need?Because Monster is not stong.
If it is you first time in Mini RC and you have no idea what you need and want, get the iwaver Monster from AUSMICRO, they can help you to find out…
You guys have good idea.
And this is our way to do..
http://www.ausmicro.com/forum/attachment.php?attachmentid=147&d=1144905230 -
AuthorPosts