Morbid Monaro

Forum Replies Created

Viewing 25 posts - 1 through 25 (of 58 total)
  • Author
    Posts
  • in reply to: NEW; Sydney race day…… Mini Z and 1/10 gtg!!! #18333
    Morbid Monaro
    Participant
    • Posts: 58

    dude the lambo rocks, handles like a dream

    in reply to: rcp mini-96 track anyone ? #18540
    Morbid Monaro
    Participant
    • Posts: 58

    another idea is maybe gaffa tape or fiber reinforced tape, its strong & absorbs impact. i’m not sure that cardboard is a good idea, it would need to be replaced a lot & be pretty hard to keep stuck down, maybe some light corflute(corrigated plastic, like cardboard but made of plastic) i was thinking ofsticking a thin strip of plastic or laminate along the edge of each peice, the only problem i can see with this is the gaps where the mats join catching on the cars & not much absorbtion…… hmmmm still thinking i guess

    in reply to: Best Stock Motor #59748
    Morbid Monaro
    Participant
    • Posts: 58

    i’ve got the Orion Core stock motor & it’s got plenty of power & very easy to pull apart, i haven’t raced with it yet but on the test track it been pulling some pretty good times, with the right gearing & the right setup i think it will be very competitive.

    in reply to: Best Stock Motor #59744
    Morbid Monaro
    Participant
    • Posts: 58

    also another reason for no reverse was from the old days of racing when everybody had mechanical speed controllers with the massive resistor usually mounted near the rear of the car, when the car gets stuck & a marshal goes to pick up your car from the back if you reverse when they aren’t ready then you have a very good chance of burning the marshal as the resistors get incredibly hot during racing. a lot of people get a little hesitant of picking the cars up quickly(which matters in racing)when there’s the chance of being burned, hence another reason forno reverse, but pete is right though,the main reason was to protect other cars fromcolliding(however you spell it) with you& damaging both cars

    in reply to: 1/10th racing #18627
    Morbid Monaro
    Participant
    • Posts: 58

    And this is the track at tempe, tuesday night racing

    in reply to: 1/10th racing #18621
    Morbid Monaro
    Participant
    • Posts: 58

    ok, this is the actual layout of the track for TCS at castle hill

    in reply to: rcp mini-96 track anyone ? #18620
    Morbid Monaro
    Participant
    • Posts: 58

    yeah, yeah, your car ripps! Me thinks that 8 cars is a little too many for each race, next time we’ll have to get organised with heats n’ stuff, we can race for ‘the championship of the universe’, muahahahaha,VICTORY ISMINE!!!!

    in reply to: my “Woah Nelly!” Turbo…. #59743
    Morbid Monaro
    Participant
    • Posts: 58

    sweet dude, both of them are on their way. thanx for the help

    hope it’s nothing too serious

    in reply to: rcp mini-96 track anyone ? #18648
    Morbid Monaro
    Participant
    • Posts: 58

    cheers dude, i’m not sure who owns the lambo, just some ring in i guess, hehehe, nice drivin dude

    in reply to: NEW; Sydney race day…… Mini Z and 1/10 gtg!!! #18647
    Morbid Monaro
    Participant
    • Posts: 58

    doh, you gatto do what you gotta do.thanx to petewah the track will be big & solid, cheers dudexp1700.gif

    Edited by – Morbid Monaro on 15 September 2005 17:41:21

    in reply to: Aircraft #59739
    Morbid Monaro
    Participant
    • Posts: 58

    hey guy’s, just reading the thread & i’ve been flying for years, everything from slope soarers to big 1/5th scale gas planes & i have to admit that these little thing are heaps of fun. i scored one on ebay cheap, i had fun for a couple of days(which is lots for me) & eventually gave it to a friends son which he learnt to fly with. although there’s nothing like 3D flying it was so worth the money

    in reply to: NEW; Sydney race day…… Mini Z and 1/10 gtg!!! #18655
    Morbid Monaro
    Participant
    • Posts: 58

    good luck dudebig.gif

    in reply to: NEW; Sydney race day…… Mini Z and 1/10 gtg!!! #18658
    Morbid Monaro
    Participant
    • Posts: 58

    sweet, bring your 1:10th as well, also are you racing tomorrow at castle hill?

    in reply to: NEW; Sydney race day…… Mini Z and 1/10 gtg!!! #18661
    Morbid Monaro
    Participant
    • Posts: 58

    So who’s up for racing this weekend? had so much fun last week, can’t wait for the next one

    in reply to: my “Woah Nelly!” Turbo…. #59737
    Morbid Monaro
    Participant
    • Posts: 58

    dude, it only get better as they get older, sheamazes me every day & with all my toys i’m sure she’ll be a champion R/C driver before she’s 5. at the moment she’s 3 1/2 &can only steer or accelerate, hopefully both at the same timewill come soon, hehehe

    i’ve read the whole thread which is why i jumped in, just had some conflicting info to what i’ve experienced

    in reply to: rcp mini-96 track anyone ? #18662
    Morbid Monaro
    Participant
    • Posts: 58

    cool, thanx for putting those up Aaron, top stuff

    in reply to: my “Woah Nelly!” Turbo…. #59735
    Morbid Monaro
    Participant
    • Posts: 58
    Quote:
    ph2t wrote:

    Quote:
    Morbid Monaro wrote:

    to be honest, i didn””t get home till the sundaynight& i sent the email on friday morning & when i didn””t see a reply I didn””t give it another thought, also i””ve emailed you before a few times & never recieved a reply.

    i don””t know if you remember but the nelly that melted on the lithium car was the one that took 2 months to deliver after i payed for it so i””m not too interested in the offer,cheers anyway dude

    yeah, I apologise for that. i”ve changed the way I sell them now so I didn”t have to live my life by those bloody paypal ‘add to cart’ buttons. If you want, I”ll happliy fix those 1.3”s for you, no cost. As I said I like to think that I support my customers when shit happens, lol… just let me know if you”re interested.

    cheers,

    ph2t.

    plus you’ve just had a little munchkin which must be mucking around with your ‘you time’ hehehe, believe me i know about that(see pic)

    i’ll email you about repair’s but if its not going to handle the lithiums there’s not much point, it will just happen again

    in reply to: my “Woah Nelly!” Turbo…. #59734
    Morbid Monaro
    Participant
    • Posts: 58
    Quote:
    betty.k wrote:

    i”ve said it before and i”ll say it again.

    running lithium batts is pushing your luck. running an 18t(???) turn motor is asking for trouble.combine the 2 and you”ve got a recipe for disaster. even a 1:18 esc will struggle under that load.

    and after all that my 4 cell would still cream you on a track!big.gif8ball.gif

    seriously dude, a car this fast was never meant for the track, its just a straghtline car, 20secs run time at most each run. saying that is like saying my F1Ferrari will beat your Topfuel Dragster around a track, not in the same league. my track car is a MR02, alloy everything & a Speedy NM with a 7tooth, stock electronics & its not slow roundmy track, check out the videos in themini-96 trackthread, my cars are the Pajero & the blackMcLaren

    in reply to: rcp mini-96 track anyone ? #18669
    Morbid Monaro
    Participant
    • Posts: 58
    Quote:
    dgs73 wrote:

    not bad J… notice in the first part the 350Z has that weird red ‘ghost’ imagefollowing it around the track? Odd but kinda funky…

    yeah, i noticed that too, ooooooo……….scarey, thats a result of the reduction in size, reduce the file sizereduce the quality, bit of a trade off but at least its upbig.gif

    in reply to: my “Woah Nelly!” Turbo…. #59731
    Morbid Monaro
    Participant
    • Posts: 58

    i just had another look at the nellies & they are both 1.3’s, check the pic, so i must have bought the1.3’s before the deluxe came out

    in reply to: my “Woah Nelly!” Turbo…. #59730
    Morbid Monaro
    Participant
    • Posts: 58

    woops, the second one i got, about may-ish

    in reply to: my “Woah Nelly!” Turbo…. #59729
    Morbid Monaro
    Participant
    • Posts: 58

    oh yeah, i think i bought the 1.2 before the 1.3’s came out & there was no mention of a cell limit or if it was unwise to use lithium, it was the first one i got inabout feb-march, somewhere there

    in reply to: my “Woah Nelly!” Turbo…. #59728
    Morbid Monaro
    Participant
    • Posts: 58

    to be honest, i didn’t get home till the sundaynight& i sent the email on friday morning & when i didn’t see a reply I didn’t give it another thought, also i’ve emailed you before a few times & never recieved a reply.

    i don’t know if you remember but the nelly that melted on the lithium car was the one that took 2 months to deliver after i payed for it so i’m not too interested in the offer,cheers anyway dude

    in reply to: rcp mini-96 track anyone ? #18671
    Morbid Monaro
    Participant
    • Posts: 58

    oh yeah, in the pic the tracks are all double width, since we have been making single width tracks 4 matson the pic equals 1 of our mats. although i’m trying to get enough mats to make the tracks double width,it’ll take about 120-130 mats, think it might be a while though pretty exy

    in reply to: rcp mini-96 track anyone ? #18670
    Morbid Monaro
    Participant
    • Posts: 58

    awesome!!!! finally got the videos up, pretty bad quality but i had to keep reducing the file size till it worked, if you play it small you can get the idea. this a compilation of all the days racing so far & an example the versatility of the track shape & location(indoor,outdoor) also all the tracks were made with less than 40 mats. so at $20 for 4 if you spend about $200 you can make any of the track in the pic, can’t remember where i got the pic from

Viewing 25 posts - 1 through 25 (of 58 total)