Renton

[Renton]

can anyone open the link to the drift settings data?

I bloody well cant

[Renton]

I have ordered a zip zaps with some initial D upgrades

Also have my eye on a zip zaps monster truck :approve: saw some great videos of these on there net set up as crawlers. They were getting over everything. Somehow I can see my work production, where I am now, slowing up a little 😀

[Renton]

My apartment has a radical polished concrete car park. The tape worked really well on it

when you put it on put it around at least once and a half and make sure where the last bit tapes down is facing backwards (stop it being ripped off) also try cover as much of the tyre as possible to stop grabbing

[Renton]

All i have been doing with my MA010 is drifting

I have done no motor upgrade. only put a couple of alloy covers (looks pretty) and some bearings in it. Im looking to upgrade to a PN speedy AWD motor.

My mate has a 2×3 stack and a macho motor and its just to quick for drifting. I struggle with it. Then again it could just be his set up or something or my incompetence 😮

If anyone can inform this brother how to put a vid up ill put some of my living room drift action 😀

I forget who it was that told me to run some electrical tape around my tyres. this worked real well and didnt seem to scratch floor boards when i used it on them

Id get a feel for drifting a stock car before modding. My R34 shell is rather rooted from learning. Once you get the hang of it then upgrade.

Can anyone also tell me what the effect would be if i was to put a 2×2 or 2×3 stack in with only a stock motor?

[Renton]

see now im keen on a zip zap :smiley5:

ausmicro selling them? or does anyone know the best spot to source them other than ebay

thanks heaps

[Renton]

I just dont know between a q-steer a bit char g or a zip zap

they all look so fun in there own respects

im leaning towards the bit CG’s . what is the handling like on them?

[Renton]

well isnt there just some top vibes flaoting around

life can get you down aaron but it sure beats being dead. Just remeber, Never argue with idiots cause they will only bring you down to there level, and beat you with experience

I have only discovered a love for RC cars in the last 6 months. This in turn put me onto this site. A site of no assumptions or jerks, no writing off or heckling. Just a site of good info and very technically minded people. For someone like me, who has next to no bloody idea, to ask mundane and simple questions and still have them answered in depth just astounds me.

Aaron – Is the BA in your avatar yours? if so how would you feel about a set of EBC greenstuff pads for the front of the old girl? They would be my birthday gift to ausmicro and a gift to you for persevering through shit times, and to re-assure you that mates are out there even if you have never seen and or spoke with them.

Happy B’day Ausmicro

hip, hip

[Renton]

cheers for the replies everyone

if it wasnt for shoe goo in my skating days I wouldve went through a pair of shoes a month. Needless to say it was my mother who bought me the goo :approve:

Kerosene: Where did you get you CF from? easily accessible?

Once again thanks everyone for you replies

ps I bought some drift tyres……terribly, terribly addictive

[Renton]

I banned myself from this link pretty early in the piece

How dare you all tempt me this much

I need a new wetsuit, 2 x boards and now a micro-t for winter :smiley13:

Looks like i picked a good day to quit smoking….Now to buget this extra money.

Can anyone tell me if it comes with instructions on how to handle your partners huffs and puffs when you pull out yet another r/c device?….or does it come in pink?

[Renton]

Is this beautiful looking piece of work and a nice quick motor going to get my AWD pumping or is it more set up for the f1’s

im not to tuned in with all this electronic talk, i do however want my car quick

Is there an easier motor upgrade not requiring any form of turbo?

Cheers

[Renton]

is it just venues that are holding some races back?

would people (preferably owning track supplies) travel so Newcastle for an evening of racing?

[Renton]

rcs2die4

at the risk of the tail between my legs heading somewhere else i will admit the following

I pulled it apart….again.

I found a lil rock in the gears :smiley13:
I didnt clean my pot first time (due to no pcb) but have since obtained some and done it this time

I know it was all due to that one little rock.

Once again thankyou for your radical thread. without it I would have had no chance in the world.

3 cheers for rcs2die4….hiphip

Before doing it the most complex thing I had done was put together a kinder suprise and brush my teeh left handed

[Renton]

rcs2die4 your a legend. thankyou so much for a great, detailed instructions

but………………………….. 🙁

for someone who has done nothing like this i got through it so easy thanks to your instructions. Now ive put it all back together, turned it on and the same thing happened 🙁

I was so excited then shattered

ahhh i guess its to go through it all again

[Renton]

cheers for the input

I purchased myself some NI-MH batts today. While I was there I obtained a book which I have found an abundance of FETS. Now I dont even know what a FET does but from the talk I am hearing its what I want :smiley14:

Another lil snag I have hit is my throttle sometimes gets stuck mid turn. has this happened to anyone before?

I know I might sound like a nagging prick but you gotta ask questions in order to learn.

[Renton]

between you and me klims i wouldnt know what a FET is. I know of Bobba Fett and thats it.

going to look into these FETS and motor upgrade on the weekend.

[Renton]

klims thats the thing, i really want to get into the upgrades but dont even know where to begin. Its been a long monday at work so maybe its just my brain frying already

I got a R34 GTR vspec AWD

cant wait to get the girl really moving and hopefully sliding around my place

[Renton]

cheers mini-g

im from Newcastle. Home of the Knights and Mark Richards

[Renton]

im brand spanking new

ordered my first mini-z last night and joined the forum tonight

it would appear there is an absolute stack for me to learn and i cant wait

oh hurry up and get to me car

[Renton]

I have ordered myself an AWD R34 GTR

I know sweet little to nothing about mini-z’s but cant wait to throw myself into it.

To say im excited about its delivery would be and understatement

[Author]

Posts