Renton

[Renton]

uh oh

Rentons wallet is starting to burn

[Renton]

just start your day at 8pm ph2t :smiley2:

I would love one if you ever get the time ph2t. Wouldnt mind paying a little extra for the pleasure either.

[Renton]

Hey mate

Im not overly familiar with the mr02 as I run a AWD. But my guess is the same parts would help both platforms

A good set of bearings should be your first purchase. first thing i did was to upgrade my bearings, drive shaft, diffs and a couple of sets of quality batteries. There are plenty of motors to pick from. just be careful of what your current board can handle. A modified motor will fry your new purchase before you get it to the end of the kitchen, if you have not upgraded the fets or installed a turbo.

All the flashy alloy parts look great, but also come with extra weight, and alot of the time, with no benefit to performance.

maybe some of the mr02 drivers can chip in about dampeners and the likes of it.

If all this fails, go buy a 2 stage model rocket engine, tape it on and watch that bad boy fly

[Renton]

each to there own so let it go. You got a problem with someone elses way of living? then you have serious issues

stop bickering like little school girls and get on with the challenge.

Let your work do the talking

and in no disrespect vroomvroom55 ,if you prefer xmodsforum, hang there mate, no need to come to ausmicro and write off people.

If there is one thing I hate more than petty arguments, its petty arguments on the net and cheap shots from behind the keyboard.

Im not taking sides, just keeping the peace.

move on

[Renton]

im no expert when it comes to electricty.

but something tells me unless they are the same fets this would not be a good idea.

anyone who knows there electrics want to help out??

[Renton]

doesn anybody know if the Ausmicro shop is now back up and operational ?

[Renton]

Unfortunately im at least 12 hours from melbourne whtang otherwise you woulda seen my by now.

I would however pay postage etc.

Will let you know once i get my parts etc

Thanks mate

[Renton]

Thanks Pork Hunt.

I almost feel guilty, seems to easy.

I have a stack of spare AWD parts so if anyone is chasing any odds and ends, gears, knuckles etc let me know. could do a little swap of sorts. Its mainly all stock stuff but it does the job

[Renton]

you have my word blurrc

so long as everyone meets up for some racing.

come to think of it with 60 mill ill fly everyone somewhere for a meet.

[Renton]

lucky you dgs

had my eye on one for a while but i have priorities at the minute.

Hopefully ill win that $60 mill jackpot next week and there will be Dnanos for everyone

[Renton]

boom!

PM sent

*** bless the XF

*** shoulda said g0d but i dont know why it would blank it out?

Gee we live in funny times

[Renton]

is it an XF ?

[Renton]

I have just moved into a new house which has a massive polished floor board living / kitchen area, not to mention a double garage 🙂

My bench is currently occupied with surfboards, broken legropes and other odds and ends.

Cant wait to get abit of spare coin to lay down on some new equipment.

[Renton]

I cant offer much assistance other than to strenghten ph2ts open letter.

If you cant, dont wish to, or are struggling to maintain the site then hand the sword over.

If there is anyone id like to see at the helm it would be ph2t. Not to blow smoke up his tailpipe but he has the knowledge, and the skills, to give the people what they want and to fire up the site once again.

Everyone who reads this should throw there support behind ph2ts proposal and not just read it an hope for the best. If ph2ts offer is knocked back, well so might my interest in the site all together.

give the people what they want.

I ausmicro and I vote

[Renton]

I think that there needs to be the big changes that you say not to fear.

Just gotta make it worth the while of people coming to the site. Different layout so things are easier to get to and updates and feedback on new products etc is handy.

The shop was a major drawcard and still could be if it was manned and stocked with up to date parts. Im sure I speak for everyone when I say its a royal pain in the backside to have to order stuff in from overseas.

I mean ultimately more traffic and awareness of the site is what is wanted so something has to change. I dont keep going back to the places for a feed if they never change there menu.

[Renton]

lucky bugger

is that smoke pouring out of your pockets ?

[Renton]

I tend to agree also.

In saying that I am onto my 3rd chassis on my kyosho MA010. Mind you, its a little overpowered for my living room, but this isnt going to stop me 🙂

I have had no real breaks that havent been caused by my stupidity.

Id say later in the year Im gunna move my way into a pan style set up like colouro (i think that was his member name) now makes under greyscale.

[Renton]

can someone please send there private, free, jet and or bus to pick me up so I can come down 🙁

[Renton]

i be needing a new chassis first. high speed into my dining room chair and it wasnt to pretty 🙁

[Renton]

INOX is very similar to WD40, only better in my opinion.

The first reply re the seat had me in s***ches for days.

My girl is now convinced she is getting a ‘woman tuned’ seat for christmas. Yes she is very puzzled, and im rather amused.

[Renton]

no matter how helpful or busy someone is, if you run a business, no matter how big or small, you need to deal with it.

Id be quite ticked off if i had paid for something and had no response.

Whilst i understand Aaron might be busy he still cant ignore the fact that this shop is still capable of processing orders, he needs to be aware of this as its just a farking joke to those who have parted with money for goods, especially around christmas time.

[Renton]

wow indeed Dangerous Dave

two of the sweetest words in the english language, ROAD TRIP! 🙂

[Renton]

cant we give a few more people the power to delete posts?

united we stand, divided we fall

I just dont want to see this site fall on the way side as its what go me going in micro rc

email the host panda and tell them its out of control. Or you could give me there email and i will demonstrate a rather restrained letter outlining the problem 🙂

if there is one thing I hate more than people who do not keep left unless overtaking its this crap

[Renton]

so when are you due back klims?

I wish id remebered this earlier when the AUD was kicking arse.

You still doing orders for people mate?

[Renton]

Im in for next race meet. Might even supply some beers 🙂 its all tactics.

Yeah im looking to go all out on some 2.4 action after christmas. Id say I will hang onto my current MA010 and just start from scratch on another. Always good to have a spare, so I tell myself.

mmmm I best do a rebuild, clean and grab a couple of spare parts I be needing…..oh and grab the esky by the sounds of it 🙂

[Author]

Posts