t00l
Forum Replies Created
-
AuthorPosts
-
ill get a picture and link in a sec to what i mean
blue is where this third cap is ment to go?
but what will the third one do that joins the two up?
wont that be connecting it all together and short it out some how?
and also, what do you guys use for connecting tabs to the miniz or should i just rip the stock ones off?
just get use to stock then and slowly up the speed, if your just going around the house and office then you probo wont need all of the upgrades 🙂
hmmmm, all i need is a banner saying aus micro on it measuring about 10×4 m 🙂
mosfetS… or a turbo if you want the easy way out, fets just give you that better performance when running motors 5x better than the x speed (most probo too hard for you to practice with atm)
see here to see what i mean by its a very hard installation
http://tokyotekki.com/mosfet.htmli wouldn?t recommend these for beginners, they are mainly used when using more powerful motors. The x speed can be handled by the stock circuit board anyway.
as for handling and durability, did you check the miniz world link i gave you?
Here is the upgrades i would get anyway
Speed:
x Good batteries
x X Speed Motor
x Ball Bearings (for wheels)
use the 9 tooth pinion you get with your mini zHandling:
x Ball bearing Differential
x Hard front springs
x Carbon fiber H plate, or O plate if you can get one from somewhere
x Rear shock set (so the H plate wont snap)
x Good low G tires (18g will be good) (lower = more sticky)
x alloy mags (only if you want looks)Durability:
x Spare set of servo gears, yes these do break fairly easy after giving your car a good bang or even just a good run in
x Spare or alloy pinions, these can wear out over time and you will need more to make your car run smoothAll this may cost a fair bit, but its all you need to get your car running good, i know there are a lot more parts out there you can get but most of them make next to no difference unless you want that extra second of your lap racing time. But as a beginner i guess you just want something you can crash into walls a lot and something that will hold.
After you fell pretty pro at it then you should buy a turbo, or fets if you are gain and then a pro modified motor. Thats when you can start going fast 😉
Have fun
hope its soon, i wanna know if its worth entering or not 😉
wow, i cant believe no one has taken intrest in this post
do you have any pictures of the track yet?
or what you have done so far? its kind of hard to picture what you have done 😛
as for the lights if you goto dick smith im sure there should be a small kit they have that will do a similar function to what you want, you would be quite suprised 😛
ok 🙂
just a quick question, what do the winners get?
yeah i got the caps and everything, i have the two joint on the same as normal motors, now just what way do i fit the third on?
the stock and x speed have the 103 lable one facing out and one facing in so what way would the third go,and would this be right even putting this third one on?
i picked up a second hand mini z for 100, a bit of cleaning in the eletronics and it was off, this also came with an x speed motor and some new tyres for it, the body was pretty scrached but i have got new paint since then and as for mods, ive gone crazy and lost $ of how much i have spent. all i can tell ya now is go for gear that will increase your preformance, not looks, and if you have the $ go for the looks 😉
the x speed is a motor upgrade
for speed 20km is about stock speed and then 26km with an x speedas for fets (MOSFETS) are very tiny chips that fit to your eletronics of your board, if you have seen the size they are very tiny and would not bother unless you have top notch soldering skills
the other option there is to send your z to someone to fet mod it for you
if you want upgrades to make it fast, there is so much you can do, as every part is upgradeable on the z
http://www.minizstore.com is a good place to look for a fairly wide range of everything you can buy
for a start, id say you get some good rechargeable batteries and a good recharger, and an x speed motor.
Im not sure how good you are with rc cars, but id say unless you get good realy fast at controling your car and weaving around the house with it wait untill you get any more mods for your car.
as for upgrades, speed is not the only area, there is many more you could look at.
The best place to have a long look at would be here
http://www.minizworld.com/modules.php?name=MZTools&file=zones
that should be a good start at showing you all the parts you can upgrade and where it helps increase and by around how much
hope i helped, any more questions just feel free to ask 🙂
i got the plasma dash today
im just having a bugger of a time getting these bloody caps to stick to the motor with solder 🙁and also, in a pm from jamie, he said i would need 3 caps, 1 on each end like the stock and then one joining the two together or something
does this sound right to you guys?800×600 is way to big for me, 1152×864 is still even pretty big, i like to work with space anyway 🙂
holy chipes, so like 30$ for a 12 stack?
they look sweet 🙂
cant wait to see a full spec sheet of em 😀yeah, i can hold tight for a week or so, i just wanted em soon so i could get all work underway when i recieve my shipments from miniz world and rcmart (dinball) probo late next week 😛
what fet’s you got, or recommend for the plasma dash, and have you got any good ones that will say handle it with a 4×2 stack?
also can you plz give me a rough price list of em so i can have a rough idea 🙂
/offtopic
gt, id like to order some fets off ya but ya not replying to ya pm’s
you dont have msn or go on irc do ya?
omg, you guys are willing to pay that much???
scerw that, i mean they are hell good and all but id rather ~$97AU on my mini-z 🙂
or say 10 normal bitcharg’s 😉how much?
these are sweet, where can ya order em from?
I WANT EM 😀well guys, i got my mates palm runner with the plam runner x speed, fully charged high powered batteries and it did 8 k max on my 4wd speed checker 😛
compared to a miniz x speed that does 27 k 😀
Quote:hmm video tutorials are allways a good way to get more ppl here.
or maybe a store of some sort.
if u go for a store then you should have something that others dont 🙂 or something better than others 🙂anyway its just my 15 year old opinion
if jamie aint beat me too it im gonna do the webs only photo tut on how to get a plasma dash woring in a mini z 🙂
with resutlts of course 😛aaron, can you plz mail the pic to archi@eon.net.au (dont care bout size limit)
Quote:hmm video tutorials are allways a good way to get more ppl here.
or maybe a store of some sort.
if u go for a store then you should have something that others dont 🙂 or something better than others 🙂anyway its just my 15 year old opinion
if jamie aint beat me too it im gonna do the webs only photo tut on how to get a plasma dash woring in a mini z 🙂
with resutlts of course 😛aaron, can you plz mail the pic to archi@eon.net.au (dont care bout size limit)
:shy:yay i get it now lol
this should be fun 🙂
anyone have a good quality 10m x 3m banner print out picture of aus micro.com?
-
AuthorPosts