Admin

Forum Replies Created

Viewing 25 posts - 3,126 through 3,150 (of 4,827 total)
  • Author
    Posts
  • in reply to: Bit Char-G coming to America #14986
    Admin
    Participant
    • Posts: 5952

    Ummm, yeah…that news is only about 6 months old. They were supposed to come out in June, but they’ve been delayed repeatedly and I think the latest word is September. You’ll also be limited to 27 and 49 MHz.

    in reply to: What’s the Crippling capasitor for? #14983
    Admin
    Participant
    • Posts: 5952

    i just cut mine out did i do the right thing

    in reply to: LED mod plans? #14982
    Admin
    Participant
    • Posts: 5952

    Limca, it’s pretty easy to determine where the wires go. They are all labeled on the circuit board. F=forward B=backward L=left R=right. These are all – outputs. The one labeled + is the common positive lead. I tried this with blue leds and it stuttered a little bit. I havent tried it with the dual cell mod and blue leds yet.

    Rosin Core Solder Fumes … mmm mmm good.

    I’ve soldered on all types of batteries even little lithium button cells. The key is high wattage hot iron, lots of flux and do it FAST. If it doesn’t take right away, let it cool and try again. Otherwise, well … you know, KABOOOOM.

    in reply to: Micro Yokomo vs. BitChar-G #14981
    Admin
    Participant
    • Posts: 5952

    b-drift, you should NEVER become a salesman!

    in reply to: What’s the Crippling capasitor for? #14980
    Admin
    Participant
    • Posts: 5952

    Yep, good call Derek. The only thing a cap in that position can do is decrease output power. I suspect it was primarily for frequency seperation. My cars will work with other frequency remotes if the remote wire is right up next to the car. And when racing, the cars tend to studder when they get close to the other person. Instead of making high quality transmitters and receivers with accurate frequencies they just lowered the output wattage with the cap. That’s my theory.

    -Peter

    in reply to: OMG!!! *TONS* OF BIT CHAR-G’S IN PERTH!!! #14979
    Admin
    Participant
    • Posts: 5952

    in perth is that in the uk

    in reply to: Anyone know where I can get these? #14978
    Admin
    Participant
    • Posts: 5952
    in reply to: Anyone know where I can get these? #14977
    Admin
    Participant
    • Posts: 5952

    I’ve changed my mind I”m going to get the Silver Toyota Celica ( whole thing)and I know where I can get it and the gears so I’m going to do that especially since my total order from that place will be $104.90 including tax. This is what I’m getting

    1. Tire set: Soft, Medium, Hard: Accessories $3.60 each Amt= 1
    2. Silver Toyota Celica: Body: Toyota R/C?s $27.00 each Amt= 1
    3. 27 Mhz Booster set: Booster set: Special Edition $39.95*each Amt= 1
    4. 2.6 Motor: Motor: Accessories: $5.00 each Amt=1
    5. Tomy Gear Set: Three Gear Ratios: accessories: $10.80 each Amt= 1
    + 19.05 Shipping

    Total= $104.90
    Birthday-Mom
    *Comes with 27 mhz Booster Pack, 3.0 Engine, 4 band multi controller

    Plus some stuff from Radio shack and QFM so I can make this:

    Celica XaveX NRG

    Silver Toyota Celica Body
    Dual Drive Chassis
    3.0 motor
    Orange Gears
    NIMH Battery
    Soft Front Tires, Medium Back Tires
    Silver Plated Suspension
    Blue LED Headlights
    I gave it anick name what do you think?

    in reply to: Cars that have clear headlights? #14976
    Admin
    Participant
    • Posts: 5952

    Oh, and in case anyone else is interested in this type of info, the WRC Lancer EVO body has clear headlights and transparent painted tail lights.

    in reply to: “Cripple Capacitor” database? #14975
    Admin
    Participant
    • Posts: 5952

    Snoopyy said:

    By the way, does anyone wanna update the list of cars that have/don’t have the cripple cap?

    OOO! OOO! OOO! Can I please? I update the database every couple of days. If you need it more frequently, you can always look at the last user on the list and figure out who posted what after the latest update. Maybe someday Aaron could make an automated database, but I think he’s got other, more important stuff to do. And this works out ok. I’d actually like this thread to die so I could start a new one with the database and a mini-FAQ as the first post.

    in reply to: Cripple cap for cars w/o cripple caps #14974
    Admin
    Participant
    • Posts: 5952

    ugosplat – do you have any pics of what you did?

    in reply to: OMG!!! *TONS* OF BIT CHAR-G’S IN PERTH!!! #14973
    Admin
    Participant
    • Posts: 5952

    ok.. now this is news…

    does this mean that we are finally getting the hop-up parts for our bits?

    sweeeeeet…….

    in reply to: mhz on oem bit-charg #14972
    Admin
    Participant
    • Posts: 5952

    what’s the difference between the mhz?

    It’s so you can havemultiple cars running at the same time. Two cars operating on 27 MHz wouldn’t work because you’d be controlling each others car.

    Also is it possible to get your rear wheels spinning hard enough to like do a burnout?

    Not unless you do some of the high-power mods. Read the forum for more.

    in reply to: Anyone know where I can get these? #14971
    Admin
    Participant
    • Posts: 5952

    Just for the record – ausmicro.com can do gear sets shipped out ot the USA for USD12.00. Pretty competitive with US based retailers, considering we ship it around the globe!

    in reply to: *** Attention Florida Racers *** #14970
    Admin
    Participant
    • Posts: 5952

    my parents own a villa in kissime florida and we holiday there often im comin over in october or november my local hobby shop is model craftworld in the osceola square mall they only race mini 4wd tamiya cars and large scale rc cars though

    in reply to: Cripple cap for cars w/o cripple caps #14969
    Admin
    Participant
    • Posts: 5952

    I’m glad somone could take the time to check into my research! this is great news!

    in reply to: Bit Char-g Model and Specs Thread #14967
    Admin
    Participant
    • Posts: 5952

    hahahaha!!!!

    in reply to: WHERE TO FIND COMPACT CHAR G! #14965
    Admin
    Participant
    • Posts: 5952

    Lionheart

    ausmicro.com do not sell the Australian Compact Char-G, however, if you email aaron@ausmicro.com , he’ll tell you what Jap-import cars (genuine Bit Char-G) that are in stock or arriving soon.

    They are about AUD10-15 dearer than the local cars, but there’s a bigger range of models, colours and frequencies.

    Cheers

    Derek

    in reply to: WHERE TO FIND COMPACT CHAR G! #14964
    Admin
    Participant
    • Posts: 5952

    yeah, they sold out pretty fast didnt they 🙂

    in reply to: *** Attention Florida Racers *** #14963
    Admin
    Participant
    • Posts: 5952

    The only place that I can race right now until I move is the tennis courts behind my apt. but they are totally perfect cuz I can set up a longer distance course. It gives me a chance to use the faster motors, and it’s nice here at night. I’ve also noticed that if I hold the antenna from the controller about an inch off the ground that’s where I get the best range. Even inside. (weird)anybody else notice that? Oh yeh I’m 28 and I’ll never grow up. If you guys use ICQ let me know orMSN messenger.

    silla

    in reply to: “Cripple Capacitor” database? #14962
    Admin
    Participant
    • Posts: 5952

    27mhz nsx-r NO CRIPPLE CAP

    45mhz wrx blue NO CRIPPLE CAP

    57mhz red rx-7 YES CRIPPLE CAP

    35mhz castrol spec ed skyline YES CRIPPLE CAP

    Matt

    in reply to: *** Attention Florida Racers *** #14961
    Admin
    Participant
    • Posts: 5952

    I’m 46. I’ve got some OEM Bullets that came with 2.6 motors and one that hasa higher capacity battery good for about 7 mins. per charge. I’ve done some extensive gear reworking to get less load on the motor and resulting in higher performance. I’m in the process of reworking a RX7 body and will post a pic when finished, it’s a drop top. I plan on doing up some bar stock wheels and try using the HO slot car wheels made from silicon to get alttle more grip for different tracks.

    in reply to: Cripple cap for cars w/o cripple caps #14960
    Admin
    Participant
    • Posts: 5952

    i just added a new solid copper core antenna to my car and now i get 23ft of range before studdering!!. This was measured witha tape measure. I also tried putting in a 2.2ohm resistor in ‘L3’ in place of my 4.0ohm resistor but this made the range go down to aprox3 feet

    Matt

    in reply to: New Melbourne Mini-RC track #14959
    Admin
    Participant
    • Posts: 5952

    Thanx Teek!~ See you all there on the weekend! I’ll stop by and check it out.

    About time someone got serious about this whole mini-RC thing.

    Owen.

    in reply to: Supra analysis #14958
    Admin
    Participant
    • Posts: 5952

    that car really does look cool 🙂

Viewing 25 posts - 3,126 through 3,150 (of 4,827 total)