Admin
Forum Replies Created
-
AuthorPosts
-
Hi Again: Thanks for this info. But can you elaborate more on this timing function. Is this the timing, for the pulses of the single data to control the car. like used in a 555 timer circuit. If not. Can you explain this so i could understand this function better on this chip.Better yet. Give me an :example! Also by using Ohms-law how do you determine the resistor for the OSC PINS. PLEASE EXPLAIN! PS I could not open or get these last three datasheets on these websites some chineese message tops up; Thank you once again.
http://homepages.paradise.net.nz/bhabbott/tyco/sm6136.pdf
Also the HES30xx are the same.
http://homepages.paradise.net.nz/bhabbott/tyco/hes3018.pdf
http://homepages.paradise.net.nz/bhabbott/tyco/hes3017.pdf.
🙂Hey Trash can you please email me at HughChapman@Gmail.com concerning buying a new wing off you
Thanksu could just get one of my 6.0’s they fit fine
hey Trash how much for a wing??
cheersDo I loose any performance without the shaft though? If I don’t loose any performace, I am probably going to keep it as rear wheel drive until I want four wheel drive again.
I want to drift. I don’t really know how to drift with four wheel drive.
He’s modding a Mustang Xmod shell, making it himself. 😉
The baja champs just an old r/c i have had for years. The inferno is a lot of fun as its big and fast. Just imagine a 1:8 nitro buggy drifting at full power. Fun.
I have a kyosho inferno 1:8 nitro and a 1:10 tamiya baja champ. I hope to get a 1:18 Mini-T in the next few weeks and then get a 1:28 to hack around the house and annoy the cat 🙂
When I get a 1:28 car we will have to have a team meet. Now I wonder if i can squeeze in a 9 turn motor into one :p
First thing first. I am a member of that forum and I have not nor has most of the other members said anything bad about your site and im sure we have beter things to talk about. This site is for micro car as ours is for all types of R/C and I have been in this site before to look at what you guys get up to. The guy who you say is spamming your site is just another member in our fourm and we find him ok with what he posts but maybe he just did not relise he was spamming. As for us saying each others acting like 13/14 year olds….well we do play with toys dont we :p just kidding. Theres no war and no real badmouthing going on so chill out people 🙂
Lets all just go and play with our toys…..Ummm I mean adult entertainment devices 🙂Forgot to ask, how long should the transmitter battery pack be charged for?
CheersYea I’ve read most of trashs tips, good stuff..
I think I’ve gotten the hang of it ok, even manages a loop tho I didnt really mean to 😀
Had a few big crashes, hit the ground vertically at Mach 2 and ejected an engine from its nancelle. The wires caught it and ripped it to peices. Bit of time and solder later and shes apples :):)
Already snapped the wing on a run away flight (plane ended up 500 metres downwind and out of R/C range) and the horiz tail twice, but they fix up sweet.
Catch
Well I got it midday today, got to go out just before the sun set as the wind died down. Still around 5km/h wind tho.
First few attempts failed miserably, with the worst damage being the nose getting pushed in a bit and the horiz plane snapping in 2. bit of 5 min epoxy and got back out there.
Got in some good flights of around 2 mins however could hardly see the plane due to it being dusk.
Gettin up early tomorrow for a fly, cant wait!
whoops that link should have been http://www.besttoy.net
Their site isnt really up yet but you can buy stuff through email..Good to hear Cavo
I found this place, http://www.Besttoys.net , who sell the Sky Dash for $60 and stock spares.
Should be flying mine by wednesday, weather permittingthought Id bring this thread back from the dead as I’m gettin my Sky Dash A-40 this week woooooooooooooo!
trash, you still have spares for these babys??
:D:p
Update – The operation was a complete success.
After putting all 4 steering wires back on the board (they were REALLY cr@p joints) she’s a goer.
Thanks for your help betty.k and merc-blue.Very interesting show… and I was watching it a few weeks ago, and they were in front of their stores shelves… sitting on top is a vintage Tamiya Audi Quattro box…. and some of the drawers had marked on them things like “RC parts”, “Tamiya Tiger Tank parts” etc etc…. typical RC geeks… lol…
Alex
Nah, I haven’t soldered since 1989, but my housemate did electronic engineering at QUT, and he reckons he is all right. At any rate, caution is my main concern. I don’t want to kill it, now that it works.
Thanks betty.k
That has done the job. 🙂
Unfortunately I broke one of the steering servo leads off where they were dodgily soldered onto the PCB. So, off to buy an iron and solder the bugger back on. :smiley2:Once I get this one going, I’ll get onto the (nelly 1.3 + PN S04) mod for the MR-01.:evil:
Edited by – Slexlaw on 01 February 2005 08:30:28
Thanks for your help. I stripped it back to the PCB, but didn’t see anything out of the ordinary (I couldn’t work out how to see the bottom of the PCB without breaking the solder for the motor wires which were attached to the PCB case). Tried adjusting the Xtal. Still no good. It drives (with some glitching) for about 30 sec then just dies. Maybe there is uber interference in my area, since the MR-01 glitches when the Tx is off. But that doesn’t explain why the IW-01 worked perfectly. FETs are fine. No sign of any scorching or blistering (not that there should be). This is becoming slightly annoying. I hope I don’t have to send it back to Hong Kong for a replacement.
Wow z-beam! You’re great with painting 😯
I really like the Mini-Z. And thanks for the info! You really helped me out ^^Greetz Tristan
Wow z-beam! You’re great with painting 😯
I really like the Mini-Z. And thanks for the info! You really helped me out ^^Greetz Tristan
Nope, i don’t got any experience with spraypaint.But i have painted some wood 😛
-
AuthorPosts
