I found that my BIT turned differently right to left. I got it to go straight, but it understeered left andspun out going right.
I found that the two white prongs of the top of the front suspension were not resting on the swaybar evenly. One side was taking all the weight, and I filed down the taller side until they were both at an even height and the swaybar was horizontal….now it was much better but still not perfectly symmetrical, basically the wheels would turn to a steeper angle going one way.
I bent the pins holding the front wheels a tiny bit, so that when you rotate the pin the angle of the wheel changes, and I adjusted the angle such that at full lock, the wheels are both at a similar degree of lock.
…now it’s perfectly symmetrical 🙂 Not easy to achieve tho!
