chino

[chino]

3×2 huh thnx for the info. im running a pd armature an a normal close case but i cut 8 vent slots on it, it stays way cooler than it did before.
is there anyother tricks to bend the PD com tabs w/o breaking them? i need sum how to keep thoes intact cus sumtimes my motor gets so hot i melt solder pionts off a rewound armature. is there a place to buy raw comms? where did u get ur atomic case?

[chino]

ph2t, do know if it would be safe to run a stock plasma dash with a 2×2 stack of SI’s

[chino]

ph2t, do know if it would be safe to run a stack plasma dash with a 2×2 stack of SI’s

[chino]

yeah th hpi brushes are great

[chino]

all the brushes are exchangable between atomic,mrs4 45t motor, plasma dash. best brushes ive used wus the ones made for the mrs4. carbon brushes seems to be way stronger and melt away at high voltages like the PD brushes. are thoes made out of a silver compound?

[chino]

hey betty, jus in case u break ur knuckles

[chino]

i wouldve sold it or traded it in for an evo8 or tha MR…nvm insurance for that would be too high. ill jus get a lil crx ad fix it up. wtf im dreaming i didnt win crap. slap* i modify xmods and drive a station wagon…ok im awake

[chino]

ohhh austria! my bad. haha yeah i luv the resistor mod. jus remember to trim tha giudes on ur tie rod so nuthing bindes.

and if u wannah more solid feeling servo, or if it jus starts to slip all the time heres a fix

thats the main gear assembly of the xmod servo. basicly placing spacers found on motor armatures between the 2 sets of gears as shown. either this or a drop of superglue on the servo saver(part of the gear set right of the spacers where the two gear dis engage from each other

this jus disables the xmod’s biult in servo saver. well it wont be tottally disable it. it will click* click* when abrubtly moved or when u crash w/o a body. but dot worry to much about disabling the saver. unlike MR-01 the gear wont break due to the weaker motor, it will give befor it will ever break anything. i have this mod done to all my xmods, including my off roader/rock crawler. nuthing has ever went wrong

[chino]

🙁 im so sad, i wus sopposed to compete when they came to my area. but i lost track of the date and missed it. i wus told by tha pppl that went that my car wouldve spanked every entry there. i wus caught up with a female in tha back of my station wagon that night….but i wannah NSX!!! lets wiegh it out, chick/nsx chick/nsx chick i can normally see. nsx that would make all kinds of females come flockin my way. ok gtg curl up and cry now. haha i prolly wouldnt hav won by i had a chance. but i missed it

[chino]

ionnoe too much about him, but his name is “and”
heres the thread of his car, he made scans of his decks so it would be pretty easy to copy

http://p221.ezboard.com/fxmodrcfrm34.showMessage?topicID=61.topic

heres another one.
http://mitglied.lycos.de/accal/modder.jpg

doin custum chassies has been a thing lately. i dont hav too much money so this is my idea of a custom cassie
http://img.photobucket.com/albums/v51/chino925/project%20anti%20RS4/chas.jpg

haha ceap but effective, my car is lighter than a feins and he has got cf chassie

[chino]

it might be your potentiometer on ur servo. i fixed many Zs thas had tha same problem. its alwas 1 of 2, servo gears,or potentiometer. once ina while i get a board thas jus gone crazy. then i jus stick an iwaver board in it. easy fix haha.

[chino]

alot of ppl has dont it already, mainly for thoe who want more space or ottom mounted cells. heres a guy from down under that did that. u guys prolly seen it already.

i did one car with a miniz rear end.
http://photobucket.com/albums/v51/chino925/Zmods/

Edited by – chino on 03 October 2004 00:10:36

[chino]

haha. thnx but only cus ive had my xmod since they came out. well hers a bit more.
if u wannah try out mixing bevels and pinions like(11t pinion /wht bevel) ull need to make spacers under tha mount by cuttin off pieces off tha end of a ball piont pen’s ink tube

[chino]

trim the imperfections ur tires wit a nail cutter. that also helps the cars balance.

Edited by – chino on 02 October 2004 09:04:54

[chino]

nice, i like it!

[chino]

oh yeah, if the heat shrink use is a lil to thick, ull have to do a lil shaving

hey betty also if u wannah try a rear mono shock, it helps with the cars balance



use soft springs

Edited by – chino on 01 October 2004 13:03:28

[chino]

i guess i cheated haha i jus used a dremil. polished heat sinks are cool. its almost night and day compared to how the come stock

wut part of tha cup did u break? if its jus tha cup part and not tha small shaft. u can do this
to keep it from happening again, or jus until u get alloys wich is a great thing to have.

[chino]

well u can use the older bodies also.
mini cooper
mustang
viper
bmw z4
porsche 911 gt3

rash, a bit bigger than ZZs
all the none ricers i can think of at tha moment but i think i prett much got them all

[chino]

nice xmod betty. wut did u use to polish that heasink. it looks sweet. wut parts are u waiting for?

[chino]

i really want tha mini quake. my offraod racer / rock crawler is an xmod, with metal cups, nuthing breaks. i did hav to change my xmods gearing to gain more torque now im able to use standard pitch pinions like micro rs4 pins or miniz pinions
heres a few pics of a lil off roading, cool to see sum rock crawling as slide show.
hope to have jump pics and vids soon
http://photobucket.com/albums/v51/chino925/xmodster%20runz/?action=logout

[chino]

not sure but i know of a few ppl out ther that have sum. they sell em at toys r us, im not sure if u guys have them out there

http://img.photobucket.com/albums/v51/chino925/bits/rx8corner.jpg
http://img.photobucket.com/albums/v51/chino925/bits/fullloadedcontroller.jpg
http://img.photobucket.com/albums/v51/chino925/bits/rx8back.jpg
http://img.photobucket.com/albums/v51/chino925/bits/fullyloadedchassie.jpg

[chino]

colgate motion tooth brush, about 4 5 bucks. target had a sale. 2 for $4

[chino]

i kant wait to see this with a better motor.
try a
plasma dash or an PN so4

one of my cars has modified plasma dash,and stacked fets. hits 34kph as a 4 cell. from wut ppl say about the nelly, it should be screamin with a hotter motor

Edited by – chino on 31 August 2004 18:03:25

[chino]

cool, gpm makes cups, thnx for the info, naw i dont hav any links, sorry. gear diffs all around is cool too its jus i experience alot of under steer when i do it. i filled my rear gear diff with thick grease, cornering became alot smoother.

[chino]

betty, tha lil cv joint are stronger than they look. cups go out way before the joint ever will. i ran em in my truck for a while now and they have never broke. i got my alloy cup from http://www.atomicmods.com they fit great.

for one of my racers i used metal cups only in the rear since they are so pricey, and locked the rear diff. for the front i used a the ball diff slightly loosend, less stress for the plastic cups in front but still allows sum power to hav good handling and able to drift

[Author]

Posts