ken_wyleung

Forum Replies Created

Viewing 25 posts - 76 through 100 (of 209 total)

← 1 2 3 4 5 … 7 8 9 →

Author

Posts
January 31, 2006 at 11:25 am in reply to: Kyosho Mini-Z all wheels drive #57492
ken_wyleung
Participant
- Posts: 236
You can get those body by ASC or white body.:)
Check with RC-Mart, they get a lot.

Aaron wrote:

I’m starting to get a bit tired of Skylines. 😉 Perhaps doing a different AWD car (Subaru, Lancer, Atenza MPS, Lancia Delta, Audi etc etc) would be a good move.

Still more is good overall.

A.
January 27, 2006 at 6:07 am in reply to: I’m new to micro and need help #59572
ken_wyleung
Participant
- Posts: 236
The cheapest one in 1/28 can be Kyosho Palm-runner or i-Waver Power-runner, but you have to ensure you get 4 difference band.

If you are looking for a very little bit better, it can be i-waver 01.
If you are looking for speed, Firelap 02 is not bad.
If you are looking for the 1/28 feel like 1/10 or 1/12, Kyosho MR-02 or MA-010.

You know what is Benz and what is KIA?
January 25, 2006 at 11:05 am in reply to: Kyosho Mini-Z all wheels drive #59558
ken_wyleung
Participant
- Posts: 236
Good News! and Bad News!

Good News is AWD will release as GTR R32 (White or Red).
Bad News is release on February.
January 25, 2006 at 6:12 am in reply to: So Who’s done What to there AWD’s #59555
ken_wyleung
Participant
- Posts: 236
I think so,

The standard Kyosho Mini-Z is using AM27.
December 25, 2005 at 2:04 pm in reply to: Kyosho Mini-Z all wheels drive #18027
ken_wyleung
Participant
- Posts: 236
New optional parts from Atomic

http://www.rcmart.com/catalog/product_info.php?cPath=144_21_757_76_856&products_id=16423

http://www.rcmart.com/catalog/product_info.php?cPath=144_21_757_474_830&products_id=16425
December 21, 2005 at 5:06 pm in reply to: Kyosho Mini-Z all wheels drive #18051
ken_wyleung
Participant
- Posts: 236
Check the 3Racing AWD optional parts here

http://www.3racing.com.hk
December 16, 2005 at 4:19 pm in reply to: Kyosho Mini-Z all wheels drive #18065
ken_wyleung
Participant
- Posts: 236
Does anyone looking for ball bearing for your AWD, it can be one of your solution.

X-Mod knockle ball bearing can be fit on AWD knockle, and the ball bearingfrom ball bearing motor case can be fit with the shaft. It’s work for me.
December 13, 2005 at 4:50 pm in reply to: Kyosho Mini-Z all wheels drive #18074
ken_wyleung
Participant
- Posts: 236
so ready set get the nice wheel set for R34 but the chassis set do not have the 1mm offset wheels set for R34.
December 13, 2005 at 4:12 am in reply to: Kyosho Mini-Z all wheels drive #18071
ken_wyleung
Participant
- Posts: 236
Does the ready set not come with optional wheels and tires?
December 10, 2005 at 3:58 pm in reply to: Kyosho Mini-Z all wheels drive #18097
ken_wyleung
Participant
- Posts: 236
Yes, the ball bearing set was released on Dec 5, and I am waiting for other optional parts which are release on Dec 15 to 20; it can be save more on shipping.

And Can you tellus your common about your AWD…

Edited by – ken_wyleung on 10 December 2005 11:02:30
December 9, 2005 at 4:15 am in reply to: Kyosho Mini-Z all wheels drive #18108
ken_wyleung
Participant
- Posts: 236
I was think the AWD PCB is the latest PCB from KO, so it can be better than or very close to AD.
December 8, 2005 at 5:50 pm in reply to: Kyosho Mini-Z all wheels drive #18126
ken_wyleung
Participant
- Posts: 236
I feel the AD PCB is better than AWD PCB.
December 7, 2005 at 6:54 pm in reply to: Kyosho Mini-Z all wheels drive #18129
ken_wyleung
Participant
- Posts: 236
Does anyone had test the X-Speed for AWD?

Edited by – ken_wyleung on 07 December 2005 14:13:11
December 6, 2005 at 8:54 pm in reply to: Kyosho Mini-Z all wheels drive #18130
ken_wyleung
Participant
- Posts: 236
We get our AWD today…
December 3, 2005 at 2:05 pm in reply to: Kyosho Mini-Z all wheels drive #18144
ken_wyleung
Participant
- Posts: 236
Quote:

z-beam wrote:

ken, you said $7.80AUD for the titanium center shaft?

is that right? if so i want one!

MDW006 64 titanium center shaft 735yen ~AUD8.50

which is not include shipping; and not released yet.
December 1, 2005 at 5:08 pm in reply to: Kyosho Mini-Z all wheels drive #18164
ken_wyleung
Participant
- Posts: 236
It isworld wide release today.

http://www.kyosho.co.jp/web/top-e.html
December 1, 2005 at 3:25 pm in reply to: Kyosho Mini-Z all wheels drive #18170
ken_wyleung
Participant
- Posts: 236
http://www.kyosho.co.jp/web/download/instructionmanual/mini-z/pdf/miniz_awd_t.pdf

This is AWD Exploded.

Do some homework now!

Edited by – ken_wyleung on 03 December 2005 09:18:35
November 30, 2005 at 5:30 pm in reply to: Kyosho Mini-Z all wheels drive #18184
ken_wyleung
Participant
- Posts: 236
I just get the message from Japan, the AWD Ally parts may delay until Dec10..
November 30, 2005 at 4:11 am in reply to: new products from atomic #18191
ken_wyleung
Participant
- Posts: 236
It’s lookvery nice.
November 30, 2005 at 4:07 am in reply to: Kyosho Mini-Z all wheels drive #18196
ken_wyleung
Participant
- Posts: 236
Better car is not equal to faster car

What I try to say is Design and Handling…

Edited by – ken_wyleung on 29 November 2005 23:20:25
November 30, 2005 at 4:01 am in reply to: Do i need a Turbo/FET’s for iwaver motor? #18198
ken_wyleung
Participant
- Posts: 236
You MUST have a very powerful turbo or more than 2×3 FETin your MR-01 orOL for thei-Waver ‘Super X-Speed’.

I had try that motor, it is very poor. If you are going to order it from Toyeast, forget it. Try the Atomic 130 Stock (for not turbo or FET request) or Atomic T2 (request turbo or FET) from RC-Mart.
November 29, 2005 at 3:41 pm in reply to: Kyosho Mini-Z all wheels drive #18202
ken_wyleung
Participant
- Posts: 236
At this stage, I think the Mini-Z AWD must be better than X-Mod, but I don’t know is it better than MR-02. I just hopeit isbetter than MR-01. Anyway, they will be come next week.
November 28, 2005 at 12:58 pm in reply to: Kyosho Mini-Z all wheels drive #18208
ken_wyleung
Participant
- Posts: 236
http://www.mini-z.jp/modules/catalogoption/viewcat.php?cid=12&orderby=dateD

http://www.mini-z.jp/modules/catalogoption/viewcat.php?cid=12&show=10&orderby=dateD&min=10

Some more information about the optional parts.
November 26, 2005 at 3:17 pm in reply to: Kyosho Mini-Z all wheels drive #18210
ken_wyleung
Participant
- Posts: 236
That’s OK, peteWah .

It still has space for3rd partyoptional parts. I hope the 3rd party will have cheap and usefull replace and optional parts.
November 25, 2005 at 2:23 am in reply to: Kyosho Mini-Z all wheels drive #18220
ken_wyleung
Participant
- Posts: 236
I just update my last post. please check!

Edited by – ken_wyleung on 25 November 2005 11:19:35
Author

Posts

Viewing 25 posts - 76 through 100 (of 209 total)

← 1 2 3 4 5 … 7 8 9 →