peteWah
Forum Replies Created
-
AuthorPosts
-
That was silly…
Dave’s getting 1 from the states and it will be titainium and 25 USD me thinks…
maybe a item the shop should stock, Hint…

Go to google and search under images instead of a web search and you will find what your looking for…:smiley2:
quote:
Dakar Pajero Evo, Its the French car with the number 206 and as ugly as it is its growing on me FAST[/quote]
Hey Watch what you are Calling Ugly!!!
The Pajero Evo 2 is the Most Sexy Car ever Built.
I didn’t buy my mini Z because I wanted a RC Car, I bought it because it was an Evo 2
I am still trying to decide though if I prefer the 2003 model with the big wing, or the 2004 with the little kicker at the rear.But Hey, They are just plain Sexy! [/quote]I stand buy what i said, Its Ugly but growing on me….. Falcon mate, I prefer the one in
your Avatar…..The repsol looks like a sexy beast, wish they had of done it as a Overland Shell :smiley2:I got my Overland today……:pI guess i knew i was going get it first :smiley2:
Dakar Pajero Evo, Its the French car with the number 206 and as ugly as it is its growing on me FAST

Now who started this latest craze again
:huh:The posts above indicate that Daves flatmate broke his Overland last night… Grrrrrrrr > nobody to race with for a while.
Yes you heard me right…:smiley2: I have a Overland and in 2 weeks a F1…
Its a Red Wayne Kerr of a different type… Dakar Pajeo Evo :p:D:D:smiley2::p

The Answer is yes, the same as racer autoscales…
Might get My Overland tomorrow not sure because there is a F1 on the Cards and its only $10 bucks more and a closer purchase…:smiley2:
Thanks for the Spelling lesson…
Spell it like it sounds, Spell it like it sounds……HahI am a bit blah when it comes to some words.
my bad.Could not be an editor like my sister.
Hah Hah 😀
And you can leave it at that, Good Bye Now
Hay All
Sorry to hear about the washout, Might be the same case here in Sydney Town Tomorrow, Another Reason for us all to buy Overlands…
$129.95 at HobbyCo in Sydney, HAVE YOU GOT THEM THERE…The Rain is Welcome i say, Hope it stays for a week or 2 for our Dams Sake, 1 OF THEM IS @ 32ish percent and water restriction are now in place…
How is it down there anyways
Who Cares
Your not Welcome, Simple
Hay Asshole Its true… ARSEHOLEO
The local authorities have been notified, YFeRRRYou were traced before your lame ass apollogy…
Get a life you sad little boy because computer fraud will see you locked up or worse…Dont come back, Your not welcome
Your.A.D.Head
Is this Clear enougth for you CUZ,
Get use to people saying this because you made alot of people Very Angry… GET LOST FOR GOOD…. its a simple request.Just go Away ! ! !
There are still some bugs around the place :dead:
quote:
i got mine!!!!!!!yayGot What…:huh:
What Other iWaver 03 Gear is available…

Servo saver,
On the car when you buy it…Shocks can work for you or agaist depending on how your car is set up…
Bearings will fit iWaver or Kyosho sets without having to buy wheels to fit….
Get some Alloy wheels down the track for bling Reasons.Ball diff,
I recomend that you buy 1 for tracking reasons…Carbon H plates,
Are a must.There are many aftermarket parts you can buy:smiley2: Just ask Questions like you are and try multiple setups and note what works and what dosen’t
And have Fun:pMost Dodge RAM pickups in real life have a two tone paint job
from what ive seen…Metalic redish or red with silver or grey trim…:smiley2:
They have till Wedensday Dave…
quote:
Ken, You must of got a dud pro mate, mine screams on a 2×3 stack of 7317””s X-Speed, PN SpeedyNm and PNSo5 motors i would use in a stock setup… ak73 pro a, You will need fets in you car to run the x speed Pro or other hotter motors…quote:
too many of them seem to be like this out of the pack Pete, as you know I got a dud as well.I think if you put some form of spacer/shim in side the motor that would stop the slop of the armature and allow for the comm head to line up with the brushes proper but you wont let me try that, and it needs better wires…:smiley2:
Ken,
You must of got a dud pro mate, mine screams on a 2×3 stack of 7317’sX-Speed, PN SpeedyNm and PNSo5 motors i would use in a stock setup…
ak73 pro a,
You will need fets in you car to run the x speed Pro or other hotter motors…
:smiley2:quote:
only problem was that the only bodies left where dodgy wankers (pajero’s) so today i went to moddelers world and scored a tamiya 1/24th kit a toyota bB. shes gonna be pretty i tell ya!Only Red dodgy wanker ones at hobbyco right, no other colours….
I have said in an earlier post that the thing would get a complete respray….BLACKFor those of you that dont know, Pajero is the Spanish word for Wanker 😀 or so i have been made to beleve but when you say it in Spanish its a silent J i think
:smiley2:quote:
?what mr02 MM bodies are there??The 02 MM bodies that i know of are as follows…
Enzo, Diablo, All the McLarens including the benz that Dave has and the M3 BMW
They are some nice pics TD :smiley2: That Astra and Impul 350Z should have come out sooner me thinks

Thats not Funny :dead:
Please do, Shells are a must…
Big time want 1 Hmmmm :p
If a pajero is all that is left then i might strip all fittings out and spray it a different colour :smiley2::huh: -
AuthorPosts