DaveF
Forum Replies Created
-
AuthorPosts
-
Nope. I’ve changed the address in my profile to another of my email addresses. I’ve received the confirmation email, so it’s not blocked. sigh. lets wait and see.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThe faster motors will alays seem faster, but a 1.0 motor will look pretty fast if your eyes are at car level, and the car goes right past.
Anyway, if the motors were much bigger I think we’d have probably been bouncing off the walls too much. :smiley2:
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThe faster motors will alays seem faster, but a 1.0 motor will look pretty fast if your eyes are at car level, and the car goes right past.
Anyway, if the motors were much bigger I think we d have probably been bouncing off the walls too much. :smiley2:
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKJust testing this on another address.
Can someone reply with Anything to this please.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThe poles themselves should be easy to do, especially the older style, but securing them to the track might not be so easy. What is the base of your track made out of?
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKI’m actually thinking of making some track to sell!
2m x 1m board, with about 8-10m of actual track on it. You’ve seen the quality. Keep in mind that to make that track would probably take about a month for me to complete to the same standard.
I’ve seen a basic grey plastic track (no advertising, no start finish line, etc.) sell for $200 US, so I’m not sure how much to ask. I might make it some and put it on eBay.
Anyone care to make an offer now? You could also PM me the offers.
As for the trophy, I’ll be doing an animated gif of it rotating and might dodgey up a little web page for it, with results, photos, some vid snippets, etc. We’ll see what time and work commitments allow.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKRemember to make it look realistic the lines will have to not be taught. Real power lines have an amount of slack between poles.
Some poles in Tassie have 4 wires on top of a T shaped pole.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKWell, it’s now cracked 150, and Pauls Lego video is nearly at 100 hits. Go Paul. =o)
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKAddy Widjaja (maker of the bodies shown in the very first post of this discussion, replied to the question about his range with this…
I only have Ferrari Enzo, Ferrari 360 Modena and Lamborghini Murcielago.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKYeah. I knew it was on here somewhere. Cheers.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThat’s a pretty good distance!
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKAusMicro forum updates ARE important man! 🙂
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKR spec motor? What’s the difference between that and a BCG mortor? Where do they come from? What rpm do they run at??:question:
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThe Extended front was very clever. Suited that model T ford era car nicely.
You need a purple charger. hahahahaaa
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKI remember someone saying they had a 7.2 motor. Then again, he was always full of it. Can anyone guess who I’m talking about? 👿
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThe photo’s are on WebShots (under Extreme Sports. heh-heh-heh.).
The video is on this site. If you go to the homepage for AusMicro, it’s on the left hand side, under top 5 downloads.
There’s not a bloopers video, but we do have the footage to make one. It would be a lot of.. drive, crash, sorry man. drive, turn the wrong way, cut, drive, poilce tackle the other car, oops…
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKShouldn’t be. I was (and still can) receive from the old forum. Same address yeah???
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKDo those bodies fit Tomy BCG s?
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKDo those bodies fit Tomy BCG’s?
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThose french blokes have a very good eye for details in their mods, and you can buy from them for your Bit.
You’ll need a translator like Babelfish if you can’t read French.
http://racing-legends.9online.fr/pages_secondaires/bitcharg/bitcharg.htm
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKThey’re 1.0s, which is why they’re easier to control. We’re getting better as racers, and over 70% of the footage we gatherred was useable, even when 1 person was controlling 2 cars, but if there’s a huge demand for a bloopers video…
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKSo far the bloke has only said he doesn’t have a web site. So I asked if he has a set range, or is it by request (Combi to Countach). We’ll see what he has to say for himself. See if he’s just damn good, or a magician.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKYeah, cheap as chips. You get the body, tyres, and I think the rear axle and possible gears?? Have to get one to know for sure. Let us know Shypo.
Oh, is that $6US or $6AUD?
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKI suppose it’s because VW will let any toy maker use their shell that it was an obvious one for Tomy to try for. Hopefully they’ll use the old Char-G shells on the Pullbacks, or even some race decalled shells, so we can all get spare shells nice and cheap.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuKI think Aaron might be pressed for time. And don’t look at me, I definately am at the moment.
DaveF! 👿
My track – http://community.webshots.com/album/58669595eliwuK -
AuthorPosts