Jay-Z

Forum Replies Created

Viewing 25 posts - 126 through 150 (of 152 total)
  • Author
    Posts
  • in reply to: Wheel nuts just fly off #55371
    Jay-Z
    Participant
    • Posts: 157

    what`s the collar & grub screw set up? are any ausmicro guys (or girls-yeah right)running this combo? ..better yet, anyone got pix of it?

    in reply to: MR-01 PN Alloy Motor Mount #55368
    Jay-Z
    Participant
    • Posts: 157

    hey dgs, long time no post.. (for me anyhow!)when do you reckon the next group buy would happen? finally got kevsta`s GT3 kind of back together, was going to run it but looks strange with narrow tyres. might have to look into some wide plastic ones..

    in reply to: MR-01 PN Alloy Motor Mount #55364
    Jay-Z
    Participant
    • Posts: 157

    thanx N-hawk, broke my plastic motor clip so this should be the way to go! i`ll ask around with the sydney/meadowbank guys and see what i can come up with. ps,what is done to the modified motor mount, and where`s your side of the fishing hole?

    in reply to: MR-01 PN Alloy Motor Mount #55355
    Jay-Z
    Participant
    • Posts: 157

    hey guys, i`m in need of an MR01 metal motor mount.. where is the PN motor mount available and how much should i expect to pay??

    in reply to: My Iwaver Z with a few upgrades. #53616
    Jay-Z
    Participant
    • Posts: 157

    does bithead stock that kind of thing? how do you think that sort of plate would compare to your O plate?? sure looks like it could take a beating, handy for those who like to jump their Z`s!!

    in reply to: best motor. torque vs rpm #53615
    Jay-Z
    Participant
    • Posts: 157

    forget the 8 cells, i`m ataching a whipper snipper engine to my Z, LOL!! so Z-Nagual, we going to see you down at meadowbank some time?

    in reply to: Mini Z RC Car Clubs Sydney ? #53613
    Jay-Z
    Participant
    • Posts: 157

    yeah the more the better!! any further developments track wise for this sunday? ..i still think we should all get some hose & lots of tape, maybe that wide silver electrical tape?? might be an idea to sweep where we`re sticking the tape, sort of didn`t stick last time!!

    in reply to: Iwaver drama #53612
    Jay-Z
    Participant
    • Posts: 157

    hey mocky, i thing you`ll have more luck getting friction & roll shocks than finding an Oplate!! ..so good luck & if you find where to get some let me know!!

    in reply to: compact V`s bit.. #31340
    Jay-Z
    Participant
    • Posts: 157

    no wuckers DGS, i`ll bring my sleeping bag incase we end up getting sloshed at talldudes while testing out his track!! ..that`s cool isn`t it talldude, & can we have dinner over at your place too?? (LOL):D:smiley2::approve:

    in reply to: My Iwaver Z with a few upgrades. #53580
    Jay-Z
    Participant
    • Posts: 157

    are iwavers as fragile as i think they are, or did talldude just have rotten luck with his? ..and man that`s a tricky looking rear carbon plate, anything like that available for miniZ? ..looks like it wouldn`t break in a hurry!!

    in reply to: My Track #31388
    Jay-Z
    Participant
    • Posts: 157

    fully sik tallldude, i`m not even going to bother making a track now.. yours is too good!! and man i like the jumps- even if you borrowed the idea from me, LOL!!

    in reply to: best motor. torque vs rpm #53579
    Jay-Z
    Participant
    • Posts: 157

    i`m pretty happy with my Xspeed/single turbo combo especially in relation to reliability but would like to know how much better my Xspeed would be with a bearing case?? is it worth doing to an Xspeed or am i better off with another motor?

    in reply to: Are there any Aussie, car models to fit Z? #53578
    Jay-Z
    Participant
    • Posts: 157

    a bit of advice tim… it`s pretty hard to impress someone (DGS!!) that has just about every miniZ available!! & let`s not talk about BIT`s!!! ..& i hope to see ya sunday! ..oh yeah, now that my car is comparitively slow i`m all for stock motor non-FET/turbo races, LOL!!

    in reply to: Mini Z RC Car Clubs Sydney ? #53577
    Jay-Z
    Participant
    • Posts: 157

    can we get these excuses officially recognised? maybe we can list a few more so instead of handing over our reason for not turning up we could just say “refer to excuse No. 4” etc.. am i on to something here or what?? ..ps,keep up the good work kevsta!!:smiley16:

    in reply to: 900mAh Powertech #53409
    Jay-Z
    Participant
    • Posts: 157

    so i`d be better off with sanyo`s or energizers (750/800) over the powertech 900`s? how much of a difference would i notice with these batteries (sanyo/energizer) over my powertech 800`s? i`m running a single turbo/Xspeed combo in an MR01..

    in reply to: SBCG range boost…….works…….. #53406
    Jay-Z
    Participant
    • Posts: 157

    i don`t know much about these little cars but i have heard of mod`s to greatly increase range..& am interested!! what`s the easiest/most proven way to do this & is there a down side to such mod`s? ..i`ve got a 27 mhz char-g bought in australia..

    in reply to: Mini Z RC Car Clubs Sydney ? #53323
    Jay-Z
    Participant
    • Posts: 157

    p.s. dgs, how do i “search things up”? you have all the paperwork and made the order. i have no experience in ordering things like this. tell me what i do to get $$$ back & i`ll do it. you know i`m broke & could really do with $$$!!! talk to you soon.

    in reply to: Mini Z RC Car Clubs Sydney ? #53322
    Jay-Z
    Participant
    • Posts: 157

    dgs, who the f#@k am i complaining to???? i`ve put a lot of money that i can ill afford to spend down,it`s been months and nothing has happened… not only that it`s not like i personally can do anything about it- is it?? lay off the attack mate. how would you feel?

    in reply to: 900mAh Powertech #53321
    Jay-Z
    Participant
    • Posts: 157

    stand back tim, sounds like it`s going to blow!! ..and speaking of batteries, if the energizer 750`s throw 13A, how many A`s are the powertech 800`s producing?

    in reply to: Mini Z RC Car Clubs Sydney ? #53254
    Jay-Z
    Participant
    • Posts: 157

    hey kevsta, (or anyone else) how much stock is hobby co clearing? i need tyres & metal wheel nuts.. didn`t have much luck with the RCRM/stella models thing, $$$ & still nothing:angry:

    in reply to: Mini Z RC Car Clubs Sydney ? #53047
    Jay-Z
    Participant
    • Posts: 157

    ok, bbq it is.. i`ll bring some weed and kfc!!

    in reply to: Mini Z RC Car Clubs Sydney ? #52086
    Jay-Z
    Participant
    • Posts: 157

    hey tim, pitty you couldn`t make it today, we had a few people eager to have a run against your car!! ..not my wrx though, think something was loose after swapping chassis`s and smoke came out of my turbo.. it kind of melted so i`m back to a slow car till i can get a new one…

    in reply to: Mini Z RC Car Clubs Sydney ? #52068
    Jay-Z
    Participant
    • Posts: 157

    ok sydney racers, i`m thinking we should have a bbq down at meadowbank.. just sausages, bread and sauce kind of thing!! i`ve got cooking stuff so if people bring stuff to eat i`ll have stuff to cook on.. i guess it`s easiest if we just bring stuff for ourselves?? everyone call eachother!!

    in reply to: on/off switch..miniZ #51899
    Jay-Z
    Participant
    • Posts: 157

    if we can work out some kind of carpet landing area, i can only see about half the problems getting me again.. maybe less!! you just need a good take off to do a good landing!!!

    in reply to: on/off switch..miniZ #51894
    Jay-Z
    Participant
    • Posts: 157

    yeah guys, blame the jumps.. i think some people are too precious with their cars!! jumping a racer is about as much fun as you can have, i`m not crazy, you`re all missing out!! p.s. tall dude, some of my landings were a clear 10.0!!!!

Viewing 25 posts - 126 through 150 (of 152 total)